Subj : Re: Storage
To : Roy Witt
From : Ed Vance
Date : Fri Jun 27 2014 05:18 pm
06-26-14 13:05 Roy Witt wrote to Ed Vance about Storage
RW> @MSGID: <
[email protected]>
RW> Greetings Ed!
Howdy! Roy,
EV>> GM Holger ... ._ __ ,
EV>>> __. ._. .. _.
EV>> <BG> is easier written and read, hi.
RW>> --. is easier to read than __. = don't have to use the shift
RW>> key either.
RW>> Note the small space between the -- vs the non existant space
RW>> here __.
Thanks, I couldn't remember who wrote that to me while I was writing a
Reply to Holger.
RW>> .... .- ...- . .- -.. .- -.-- -.-.--
EV> I prefer using the Shifted Underscore Key because to me, using the
EV> Hyphen Key makes the Morse Characters looks like they are being sent
EV> with a Frequency-Shift Keyer for CW instead of turning the Oscillator
EV> On and Off with a Telegraph Key.
RW> In a printed medium such as this, the spacing is what makes or
RW> breaks your morse. i.e. your D reads like an R. __. vs --.
RW> where the latter shows enough of a space between Dahs to
RW> recognize the character.
D typed my way, _.. R. would look like, ._. .
Oh!, I think You meant "your G" instead "your D" above???
EV> . = Low Tone
RW> Dit - high tone
EV> - = High Tone
RW> Dah - low tone
I didn't know of a FSK CW Standard when I chose what Tone for the Morse
Code Elements.
I saw Your line of CW as a period being lower in elevation than the
hyphen was, so I assigned the Tones as they looked to me on my screen.
EV> I still would prefer using the J-38 Key with the Plastic Base
EV> reversed on the Key by removing the Two Screws, reversing the Base
EV> and re-fastening the Two Screws.
RW> I never used any speed aides, I was able to send faster than I
RW> could read with a regular key.
A J-38 Key is IIRC a Military Number for a Hand Key, I'm surprised that
You thought it was a "speed aid".
The Plastic? (Phenolic?, Bakelite?) Base the Key was mounted on allowed
the Knob on the Key Lever to extend over the operating table, instead
of over the Base, and to use the Key to send CW I would have to hold
the other end of the Key down so it wouldn't flip up and down when I
was sending CW.
I learned of a 'Tip' to reverse the Base so the Knob would be over some
of the Base and I wouldn't have to hold the Key down when I used it,
the 'Tip' IIRC was printed in a A.R.R.L. Book called "Hints and Kinks".
EV> I have a Vibroplex Bug too but found out I send better CW with the
EV> J-38 Key.
RW> I had a Vibroplex key, but gave it to somebody who had a better
RW> use for it than I did.
I thought of building an Accu-Keyer and getting a Key for it, but never
did.
EV> ... I just figured out PI to the seventy-fifth decimal place.
RW> PI are the last two letters of my original Advanced call. KB6PI
RW> ... Kissed By Six Pretty Indians
I've used Zero Intelligence Quotient, Washers Screws and Bolts and now
Old Dirty Rat (or Oldsmobile Dodge and Ramblers).
73
NNNN
... "It's as easy as 3.14159265358979323846264338327950..."
--- MultiMail/MS-DOS v0.49
--- SBBSecho 2.12-Linux
* Origin: telnet &
http://cco.ath.cx - Dial-Up: 502-875-8938 (1:2320/105.1)
