 |
Oculus USB C Strain Relief (5432933) |
 |
by Mohd Khairil (neocyke) |
|
Download |
 |
Web page |
|
|
|
This is specifically for the Oculus branded USB C cable. |
|
When connected to the top C port on my Meshify 2 case, |
|
the wobble it has makes the whole thing sketchy AF for |
|
extended use. So I made this. |
|
|
|
It eliminates the wobble and the odds of the cable |
|
connector breaking off if extra tension is applied. It's |
|
not *too* secured as not to damage the cable either. The |
|
whole thing just pops off instead. Important as the |
|
oculus cable uses fiber optics and not just plain wires. |
|
|
|
Note that the hole sizing (14.1x8.2 mm) is for the |
|
official oculus cable connector and is a snug fit (might |
|
scratch the connector a little bit). Other cables will |
|
require resizing. |
|
Outer dimensions (30x20 mm) are to clear the audio jack |
|
and power button on a Meshify 2. Should work with most |
|
other cases with horizontal aligned ports. |
|
|
|
The part in the pics is supposed to be a draft model for |
|
testing but turned out decent enough for use. Printed |
|
with PETG-wood as that was on the printer at the time |
|
lol. |
|
You can obviously print at better qualities but this |
|
should be minimum - |
|
|
|
** 0.3 res |
|
2 walls |
|
10% Grid Infill ** |
|
|
|
|
|
You'll need to excuse the obvious design flaw as this is |
|
my first time creating a 3D model and first time using |
|
TinkerCAD. ;) |
|
|
|
Date Published: 2022-08-16 10:44:00 |
|
Identifier: thingiverse-5432933 |
|
Item Size: 39245 |
|
Media Type: data |
|
|
|
# Topics |
|
Computer |
|
usb_cable |
|
Oculus |
|
stl |
|
thingiverse |
|
strain_relief |
|
USB_C |
|
computer |
|
|
|
# Collections |
|
thingiverse |
|
|
|
# Uploaded by |
|
@xtream1101 |
|
|
|
# Similar Items |
|
View similar items |
|
|
|
PHAROS |
|
