 |
Injora crawler chassis skid plate (4963411) |
 |
by c williamson (Bgredjp) |
|
Download |
 |
Web page |
|
|
|
I designed this skid plate in an effort to fit trailing |
|
arms to my Injora crawler chassis. In the end the chassis |
|
just wasn't wide enough to match the trailing arms and |
|
the axles (ar60) I wanted to run. |
|
|
|
I still liked the design, and it's a bit smoother than |
|
what came with the chassis so I rolled with it. |
|
|
|
Notes- |
|
- Lower link mounts use m3x20-25 grub screws (set screws). |
|
- Skid plate does NOT include Upper link mounts. It will |
|
require a custom upper link mount similar to the aluminum |
|
plate I show in the pictures. |
|
- This skid plate will effectively lengthen your rear |
|
lower links compared to the stock configuration so be |
|
aware adjustments will be needed to correct driveline |
|
angles. |
|
- The v13 skid uses the stock link locations, but may |
|
require a 2mm spacer under the trans depending on which |
|
rod ends you use (ex. I used Traxxas m4 rod ends and the |
|
motor plate interfered with the front links) |
|
- The v16 skid, I moved the front link mounts forward a |
|
few mm to give me room for the links with the trans |
|
mounted flat on the skid plate. Link adjustments may be |
|
needed to account for this. |
|
|
|
Depending on your battery setup, this might also be |
|
resolved by mirroring the trans to move the motor plate |
|
to the rear. This may also for for an Axial SCX-10. I |
|
believe Injora copied their skid plate design, but I |
|
don't have an SCX10 so I'm not 100% sure. |
|
|
|
Date Published: 2021-10-14 15:55:20 |
|
Identifier: thingiverse-4963411 |
|
Item Size: 4721054 |
|
Media Type: data |
|
|
|
# Topics |
|
skid |
|
thingiverse |
|
scx10 |
|
R/C Vehicles |
|
stl |
|
skid_plate |
|
rc_crawler |
|
Axial_Scx10 |
|
Axial |
|
Injora |
|
|
|
# Collections |
|
thingiverse |
|
|
|
# Uploaded by |
|
@xtream1101 |
|
|
|
# Similar Items |
|
View similar items |
|
|
|
PHAROS |
|
