 |
Nanuk Charging Case (3791850) |
 |
by Portal FPV (PortalFPV) |
|
Download |
 |
Web page |
|
|
|
I have always wanted some sort of dedicated charging |
|
solution and once I saw Turtle Labs design, I took a |
|
serious liking to it, but because theirs is a bit too |
|
pricey, I decided to design my own. |
|
|
|
This is designed around the Nanuk 910 case, a Meanwell |
|
LRS-350 power supply and an ISDT T6 charger. |
|
|
|
The plate is just a piece of acrylic I had laser cut and |
|
then just added a sheet of carbon fiber vinyl for effect. |
|
I've included my Fusion file for the plate |
|
|
|
The XT60 & JDT balance board on the right side is for |
|
connecting up your batteries |
|
The XT60 on the left is 24v output straight from the |
|
power supply for a second charger |
|
|
|
All the hardware is just M3 bolts and M3 plastic nuts. |
|
The fan I had to use M4 x 35mm bolts |
|
|
|
I plan on weaving a bungee net for the lid side for cable |
|
management |
|
|
|
Nanuk Case: |
|
https://www.amazon.com/dp/B00BP8UWRM/ref=cm_sw |
|
_r_cp_apa_i_7igsDbZEQ4XN7 |
|
|
|
Meanwell Power Supply: |
|
|
|
https://www.amazon.com/dp/B013ETVO12?ref=ppx_pop_mob_ap_share |
|
|
|
JST Balance Board: |
|
|
|
https://www.amazon.com/dp/B07JGFD6Y2/ref=cm_sw_r_cp_apa_i_vh |
|
gsDb7WRMMY7 |
|
|
|
XT60: |
|
|
|
https://www.amazon.com/dp/B07GQVHB3V/ref=cm_sw_r_cp_apa_i_qi |
|
gsDbS65FP3Q |
|
|
|
24v Case Fan: |
|
|
|
https://www.amazon.com/dp/B00B887J70/ref=cm_sw_r_cp_apa_i_mk |
|
gsDbQR8T673 |
|
|
|
Date Published: 2021-03-24 21:15:34 |
|
Identifier: thingiverse-3791850 |
|
Item Size: 2748023 |
|
Media Type: data |
|
|
|
# Topics |
|
910 |
|
pelican |
|
DIY |
|
board |
|
charging |
|
vent |
|
balance |
|
miniature |
|
laboratories |
|
c14 |
|
stl |
|
ISDT |
|
thingiverse |
|
ISDT T6 |
|
xt60 |
|
Charge |
|
turtle labs |
|
case |
|
Nanuk |
|
kit |
|
fan |
|
travel |
|
turtle |
|
|
|
# Collections |
|
thingiverse |
|
|
|
# Uploaded by |
|
@xtream1101 |
|
|
|
# Similar Items |
|
View similar items |
|
|
|
PHAROS |
|
