 |
Injora Jeep JK Frame Rail DXF files. (3698764) |
 |
by Christopher Olson (Intashu) |
|
Download |
 |
Web page |
|
|
|
Measured and modeled the 3d printable Jeep JK frame and |
|
ended up making my own carbon fiber frame rails based |
|
loosely on the design and dimensions. |
|
|
|
If you have questions or comments I'd be happy to answer, |
|
however as I am nearing the end of this project myself I |
|
am not likely to edit or make large changes to the design |
|
or files for your convenience, you'll need to sort out |
|
those edits on your end! |
|
|
|
____________________________________________________________ |
|
___________ |
|
|
|
NOTES: |
|
|
|
-It's designed and intended for use with 3mm thick carbon |
|
fiber, using all m3 screws and bolts. |
|
|
|
-It's no longer 1:1 of the original 3d files so I'll |
|
include as much of the 3d files as i have that I edited |
|
for this crawler frame, and it may need some custom |
|
tweaking after you cut it out to fit the parts you want, |
|
but it's a great foundation for a durable frame and I was |
|
glad to be able to have a 3d model to mock up and measure |
|
to make sure I didn't waste the carbon fiber prototyping |
|
a working frame for my hardbody rock crawler. |
|
|
|
-This is for the 2door jeep JK, but with the middle frame |
|
rail brace you CAN adjust the overall wheelbase for other |
|
bodies as well. |
|
|
|
-The entire frame was designed with the intention of |
|
using m3 bolts and nuts throughout. which can be bought |
|
in bulk off amazon. |
|
|
|
-I designed the DXF files with the intention of how i use |
|
them myself, I do not have the experience or knowledge on |
|
how to edit them to work any other way so I will leave |
|
that up to you to figure out! |
|
|
|
- I didn't include the files I used to make the rear leaf |
|
springs, as these shackles and leaves I got are not very |
|
good, and the brackets, not very durable. (the little |
|
rectangle pieces pictured in the image of the .dxf files) |
|
|
|
____________________________________________________________ |
|
__________ |
|
|
|
All the parts I used are commonly found on many china |
|
sites like aliexpress.com, but also can be found on |
|
Amazon (often for a higher price but faster shipping!) |
|
|
|
PARTS LIST: |
|
|
|
I used this transfer case in my truck: |
|
|
|
https://www.amazon.com/gp/product/B079KPQGLH/ref=ppx_yo_dt_b |
|
_search_asin_title?ie=UTF8&psc=1 |
|
(available in many locations other than amazon as well!) |
|
|
|
And this gearbox/bracket intended for my frame design: |
|
|
|
https://www.amazon.com/gp/product/B073WPPKHX/ref=ppx_yo_dt_b |
|
_search_asin_title?ie=UTF8&psc=1 |
|
(although I found 5:1 to slow and switched the planetary |
|
gearbox to a 3:1) |
|
|
|
This front bumper: |
|
https://www.amazon.com/Scale-Metal-Bumper-Shackles- |
|
Upgrade |
|
/dp/B075FGMW15/ref=sr_1_13?keywords=rc+crawler+fron |
|
t+bumper&qid=1560857777&s=gateway&sr=8-13 |
|
|
|
|
|
____________________________________________________________ |
|
__________ |
|
|
|
Files are included for a mock up of a scx10 style rear |
|
bumper, and a scx10 standard bumper mount that should fit |
|
between the rails in the rear. |
|
|
|
The shocks and motor are from a Redcat Gen7, but any 90- |
|
110mm shock would work with this design. |
|
|
|
The frame rails may bend slightly when mounting |
|
everything to this set of hardware, but it's more than |
|
acceptable how little it bent to fit. |
|
|
|
Date Published: 2021-03-22 04:36:01 |
|
Identifier: thingiverse-3698764 |
|
Item Size: 221028 |
|
Media Type: data |
|
|
|
# Topics |
|
injora |
|
RC crawler |
|
stl |
|
Crawler |
|
jeep |
|
RC jeep |
|
scx10 |
|
R/C Vehicles |
|
Jeep JK |
|
1:10 scale |
|
thingiverse |
|
|
|
# Collections |
|
thingiverse |
|
|
|
# Uploaded by |
|
@xtream1101 |
|
|
|
# Similar Items |
|
View similar items |
|
|
|
PHAROS |
|
