Introduction
Introduction Statistics Contact Development Disclaimer Help
Doctor Strange MCU : Mandala tao support & plates (2898895)
by Jean-Philippe Bourgeois (saberwarthog)
Download
Web page
Here is the central pieces needed to create a Mandala Tao
from the Doctor Strange film, with an acrylic plate
illuminated by a 3528 led strip, just like in the photos.
There is the following pieces :
- The **upper rounded cap**, used to close on the top and
holding the led strip, with a slit on one side to let
pass electric cables. You will have to pierce the lower
parts of this piece to be able to add any fastening
system to make it hold in place *(I used thin steel wire
to do it)*.
I didn't added holes on this part to let you choose your
own way to fasten it.
- Two different **under parts**, one with 12v *(A23)*
battery holders *(a modified version of this battery
holder : https://www.thingiverse.com/thing:2219910 I just
tweaked the height to be able to add little metal parts
for the electric contacts)* and holes to add a slide
switch.
The second under part is used as a simpler base, as the
led strip is connected to an Arduino lights system on the
Doctor strange costume *(this way, we can light up
sequentially the Eye of Agamotto, two EL-Wire on the arm
and the acrylic plate !)*
There is holes in those under parts to help secure the
upper part into them, plus a slit at the base to add some
elastic strap to hold the finished Mandala in your hand.
- a **spacer**, that can be printed multiple time and
tweaked. It is used to make sure the edge of the acrylic
plate is aligned with the leds for maximum efficiency.
*(It's better to print those without raft it seems)*
The spacer is needed as you may want to use different
thickness for your acrylic plate *(as for me, I used 3mm
Perspex plates)*.
- 2 models for the **acrylic round plates** : one for the
Orange Mandala Shield *(
tao_bouclier_orange_V2_svg_simple.svg)*, one for the
Green Mandala Time Spell
*(Tao_temporel_Vert_svg_simple.svg)*.
You will have to create the acrylic plates with laser
engraving or a CNC tho, and **beware** that the first
drawing *(for the orange Shield Mandala)* has the
engraving in black and the cutting part in red, and for
the Green Time spell, it's inverted *(engraving : red,
cutting : black) (yep, I was distracted ^^ )*
The inner cut should be of 37mm in diameter, the outer
cut should be 250mm in diameter.
**You may want to print the 3D part before doing the
acrylic part, to be able to measure exactly the size of
the upper domed part with your ledstrip on it and compare
it with the size of the inner cut before lasercutting.**
Date Published: 2021-01-19 20:28:12
Identifier: thingiverse-2898895
Item Size: 466362
Media Type: data
# Topics
MCU
Doctor_Strange
thingiverse
Magic_shield
Mandala_Tao
Props
stl
# Collections
thingiverse
# Uploaded by
@xtream1101
# Similar Items
View similar items
PHAROS
You are viewing proxied material from tilde.pink. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.