 |
AR Drone 1.0 Replacement Landing Gear (277072) |
 |
by Jason Q (Ecogeeco) |
|
Download |
 |
Web page |
|
|
|
I landed hard on the ground last fall and snapped off one |
|
of the landing gear. I tried to glue it back on but it |
|
only took a little harder then normal landing to snap it |
|
off. I found the landing gear by Pink_Iguanas but could |
|
not figure a good way to glue it on. I made a snap on |
|
piece for the cross beam and then added the flat top at |
|
the exact height to make the drone level. I printed them |
|
as one piece but found that the support messes with the |
|
ability to snap on. So i split the 2 and glued them |
|
together after printing. |
|
|
|
UPDATE This WILL work with 2.0 as well. I have verified |
|
this. |
|
|
|
DISCLAIMER Please note: I made the clip to be very tight. |
|
If you want to take it off do so with care. If you force |
|
it you may damage the cross beam and i have not seen a 3D |
|
printable version of the cross beams. |
|
|
|
Date Published: 2021-04-07 20:58:49 |
|
Identifier: thingiverse-277072 |
|
Item Size: 21939 |
|
Media Type: data |
|
|
|
# Topics |
|
parrot |
|
ar_drone_20 |
|
drone |
|
stl |
|
landing_gear |
|
thingiverse |
|
R/C Vehicles |
|
replacement_part |
|
ar_drone_10 |
|
quadcopter |
|
ar_drone |
|
|
|
# Collections |
|
thingiverse |
|
|
|
# Uploaded by |
|
@xtream1101 |
|
|
|
# Similar Items |
|
View similar items |
|
|
|
PHAROS |
|
