Introduction
Introduction Statistics Contact Development Disclaimer Help
Printable Engine off a Handgrip (2208939)
by (shivinteger)
Download
Web page
Summary
FAQ: http://www.thingiverse.com/shivinteger/about
[>>>] Generating Attributions log:
[0] Thing Title : Spade Extruder Gear
[0] Thing URL : http://www.thingiverse.com/thing:22575
[0] Thing Author : MangoT21
[0] Thing Licence : Creative Commons - Attribution
[1] Thing Title : Ricks Z-Top for MendelMax 8mm
[1] Thing URL : http://www.thingiverse.com/thing:22820
[1] Thing Author : jib
[1] Thing Licence : Creative Commons - Attribution
[2] Thing Title : Prusa i3 X assembly
[2] Thing URL : http://www.thingiverse.com/thing:74983
[2] Thing Author : barneyj
[2] Thing Licence : Creative Commons - Attribution
[3] Thing Title : Jet Engine
[3] Thing URL : http://www.thingiverse.com/thing:114468
[3] Thing Author : Xena
[3] Thing Licence : Creative Commons - Attribution
[4] Thing Title : Sector Case for Amazon Fire Phone
[4] Thing URL : http://www.thingiverse.com/thing:1154401
[4] Thing Author : joshuachung
[4] Thing Licence : Creative Commons - Attribution
[5] Thing Title : Printable airlift underground filter
[5] Thing URL : http://www.thingiverse.com/thing:1254620
[5] Thing Author : DarthCorvus
[5] Thing Licence : Creative Commons - Attribution
[6] Thing Title : Sharpie holder for Ultimate Filament
Colorer
[6] Thing URL : http://www.thingiverse.com/thing:1272162
[6] Thing Author : WaveSupportApparatus
[6] Thing Licence : Creative Commons - Attribution
[7] Thing Title : Protection box for Headplay PCS
Liberator.
[7] Thing URL : http://www.thingiverse.com/thing:1290668
[7] Thing Author : tahustvedt
[7] Thing Licence : Creative Commons - Attribution
[8] Thing Title : Flexbot Quadcopter V1.5
[8] Thing URL : http://www.thingiverse.com/thing:1383720
[8] Thing Author : Flexbot
[8] Thing Licence : Creative Commons - Attribution
[9] Thing Title : Acura rsx A-spec Vent trim replica
Attempts
[9] Thing URL : http://www.thingiverse.com/thing:1387841
[9] Thing Author : Sitherus
[9] Thing Licence : Creative Commons - Attribution
[10] Thing Title : New 3DS XL Handgrip
[10] Thing URL : http://www.thingiverse.com/thing:1424200
[10] Thing Author : jashart
[10] Thing Licence : Creative Commons - Attribution
[11] Thing Title : G-Fest 29016 02
[11] Thing URL : http://www.thingiverse.com/thing:1565659
[11] Thing Author : Espitzner
[11] Thing Licence : Creative Commons - Attribution
[+] Attributions logged
[+] Getting object #0
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Ricks-ZTop
[+] Getting object #1
[[+] Cleaning non manifold
[!] Total removed V: -0.05%, E: -0.05%, F: -0.05%
[+] Preparing : Two bottle airlift filter
[+] Rotating object = Two bottle airlift filter
[!] Volume difference is 232.68%
[+] Created duplicate : Ricks-ZTop.001
[+] Staging objects : ON_LEFT
[+] Union between : Ricks-ZTop.001 & Two bottle airlift
filter
[!] Number of faces #1 : 1968 + number of faces #2 : 7432
= 9400
[!] Number of faces of union: 9292
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Getting object #2
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Flexbot Quadcopter Cap V1.5
[+] Rotating object = Flexbot Quadcopter Cap V1.5
[!] Volume difference is 2.51%
[+] Scaled Flexbot Quadcopter Cap V1.5 by 158.57%
[+] Created duplicate : Ricks-ZTop.000
[+] Staging objects : BOTH_RIGHT
[+] Union between : Ricks-ZTop.000 & Flexbot Quadcopter
Cap V1.5
[!] Number of faces #1 : 9292 + number of faces #2 : 672
= 9964
[!] Number of faces of union: 9914
[+] Cleaning non manifold
[!] Total removed V: -0.02%, E: -0.01%, F: 0.00%
[+] Getting object #3
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Vent Trim Attempt 2
[+] Rotating object = Vent Trim Attempt 2
[!] Volume difference is 0.05%
[+] Scaled Vent Trim Attempt 2 by 590.46%
[+] Created duplicate : Ricks-ZTop.001
[+] Staging objects : ON_LEFT
[+] Union between : Ricks-ZTop.001 & Vent Trim Attempt 2
[!] Number of faces #1 : 9914 + number of faces #2 : 6134
= 16048
[!] Number of faces of union: 15978
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Getting object #4
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.23%, F: -0.35%
[+] Preparing : Hotend Fan Mount
[+] Rotating object = Hotend Fan Mount
[!] Volume difference is 1.72%
[+] Scaled Hotend Fan Mount by 179.82%
[+] Created duplicate : Ricks-ZTop.000
[+] Staging objects : BOTH_BACK
[+] Union between : Ricks-ZTop.000 & Hotend Fan Mount
[!] Number of faces #1 : 15978 + number of faces #2 :
1152 = 17130
[!] Number of faces of union: 16637
[+] Cleaning non manifold
[!] Total removed V: -0.03%, E: -0.02%, F: -0.01%
[+] Getting object #5
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Ricks-ZTop
[+] Rotating object = Ricks-ZTop
[!] Volume difference is 6.85%
[+] Scaled Ricks-ZTop by 113.46%
[+] Created duplicate : Ricks-ZTop.001
[+] Staging objects : ON_TOP
[+] Union between : Ricks-ZTop.001 & Ricks-ZTop
[!] Number of faces #1 : 16636 + number of faces #2 :
1968 = 18604
[!] Number of faces of union: 18607
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Getting object #6
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.07%, F: -0.11%
[+] Preparing : Box02top
[+] Rotating object = Box02top
[!] Volume difference is 25.69%
[+] Created duplicate : Ricks-ZTop.000
[+] Staging objects : BOTH_TOP
[+] Union between : Ricks-ZTop.000 & Box02top
[!] Number of faces #1 : 18607 + number of faces #2 :
10726 = 29333
[!] Number of faces of union: 29130
[+] Cleaning non manifold
[!] Total removed V: -0.02%, E: 0.15%, F: 0.28%
[+] Getting object #7
[[+] Cleaning non manifold
[!] Total removed V: -7.72%, E: -8.40%, F: -8.54%
[-] Object is malformed
[+] Deleting bad source : downloads/69988/SwitchTwoWay.stl
[+] Getting object #7
[[+] Cleaning non manifold
[!] Total removed V: -0.80%, E: -1.99%, F: -2.59%
[-] Object is malformed
[+] Deleting bad source :
downloads/245922/DeathStarBottom_Hollow.STL
[+] Getting object #7
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : SpadeTeeth
[+] Rotating object = SpadeTeeth.001
[!] Volume difference is 1.18%
[+] Scaled SpadeTeeth.001 by 203.86%
[+] Created duplicate : Ricks-ZTop.001
[+] Staging objects : BOTH_FRONT
[+] Union between : Ricks-ZTop.001 & SpadeTeeth.001
[!] Number of faces #1 : 29211 + number of faces #2 :
3064 = 32275
[!] Number of faces of union: 32415
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: 0.00%
[+] Getting object #8
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Coin 20160515-17743-17Pkueq-0
[+] Rotating object = Coin 20160515-17743-17Pkueq-0
[!] Volume difference is 0.33%
[+] Scaled Coin 20160515-17743-17Pkueq-0 by 311.82%
[+] Created duplicate : Ricks-ZTop.000
[+] Staging objects : BOTH_BOTTOM
[+] Union between : Ricks-ZTop.000 & Coin 20160515-17743-
17Pkueq-0
[!] Number of faces #1 : 32415 + number of faces #2 :
2796 = 35211
[!] Number of faces of union: 33483
[+] Cleaning non manifold
[!] Total removed V: -0.01%, E: -0.01%, F: -0.01%
[+] Getting object #9
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Combustion Chamber Cover
[+] Rotating object = Combustion Chamber Cover
[!] Volume difference is 25.44%
[+] Created duplicate : Ricks-ZTop.001
[+] Staging objects : ON_TOP
[+] Union between : Ricks-ZTop.001 & Combustion Chamber
Cover
[!] Number of faces #1 : 33481 + number of faces #2 : 264
= 33745
[!] Number of faces of union: 33747
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Getting object #10
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Tray For Sharpie Holders
[+] Rotating object = Tray For Sharpie Holders
[!] Volume difference is 2.09%
[+] Scaled Tray For Sharpie Holders by 168.60%
[+] Created duplicate : Ricks-ZTop.000
[+] Staging objects : ON_LEFT
[+] Union between : Ricks-ZTop.000 & Tray For Sharpie
Holders
[!] Number of faces #1 : 33747 + number of faces #2 :
1806 = 35553
[!] Number of faces of union: 35453
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: 0.00%
[+] Getting object #11
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Body Octa
[+] Rotating object = Body Octa
[!] Volume difference is 1.52%
[+] Scaled Body Octa by 187.28%
[+] Created duplicate : Ricks-ZTop.001
[+] Staging objects : ON_LEFT
[+] Union between : Ricks-ZTop.001 & Body Octa
[!] Number of faces #1 : 35453 + number of faces #2 :
12736 = 48189
[!] Number of faces of union: 13037
[+] Cleaning non manifold
[!] Total removed V: -6.00%, E: -4.36%, F: -3.34%
[-] Object is malformed
[-] Union did not work well. Discarding object.
[+] Getting object #12
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : New3DSxl grip
[+] Rotating object = New3DSxl grip.001
[!] Volume difference is 9.49%
[+] Scaled New3DSxl grip.001 by 101.75%
[+] Created duplicate : Ricks-ZTop.001
[+] Staging objects : BOTH_BACK
[+] Union between : Ricks-ZTop.001 & New3DSxl grip.001
[!] Number of faces #1 : 35453 + number of faces #2 :
4454 = 39907
[!] Number of faces of union: 38782
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.01%, F: 0.00%
[+] Getting object #13
[[+] Cleaning non manifold
[!] Total removed V: -0.11%, E: -0.08%, F: -0.01%
[+] Preparing : scf - Btm-1
[+] Rotating object = scf - Btm-1
[!] Volume difference is 0.08%
[+] Scaled scf - Btm-1 by 492.98%
[+] Created duplicate : Ricks-ZTop.000
[+] Staging objects : ON_BOTTOM
[+] Union between : Ricks-ZTop.000 & scf - Btm-1
[!] Number of faces #1 : 38782 + number of faces #2 :
16720 = 55502
[!] Number of faces of union: 55397
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Getting object #14
[[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : HammerNut-modified
[+] Rotating object = HammerNut-modified
[!] Volume difference is 0.00%
[+] Scaled HammerNut-modified by 1840.65%
[+] Created duplicate : Ricks-ZTop.001
[+] Staging objects : DEFAULT
[+] Union between : Ricks-ZTop.001 & HammerNut-modified
[!] Number of faces #1 : 55397 + number of faces #2 :
2582 = 57979
[!] Number of faces of union: 62244
[+] Cleaning non manifold
[!] Total removed V: -80.10%, E: -76.57%, F: -73.76%
[-] Object is malformed
[-] Union did not work well. Discarding object.
[>] Exporting STL to : /uploads/20170328-0058-04
Date Published: 2021-06-19 23:28:47
Identifier: thingiverse-2208939
Item Size: 1904611
Media Type: data
# Topics
union
thingiverse
floats
pit
analysis
boolean
stl
# Collections
thingiverse
# Uploaded by
@xtream1101
# Similar Items
View similar items
PHAROS
You are viewing proxied material from tilde.pink. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.