This is a text-only version of the following page on https://raymii.org:

This is a text-only version of the following page on https://raymii.org:
---
Title : Raspberry Pi Compute Module 4 eMMC flashing issue (nRPI_BOOT)
Author : Remy van Elst
Date : 26-02-2022
URL : https://raymii.org/s/blog/Raspberry_Pi_Compute_Module_4_eMMC_flashing_issues.html
Format : Markdown/HTML
---

I recently got my hands on a Raspberry Pi 4 Compute Module, 4 GB with 32 GB eMMC flash and a Compute Module 4 IO board. Due to the global chip shortage it's hard to find one in stock but I got lucky by checking [rpilocator.com] (https://rpilocator.com/) regularly (thanks to [Jeff Geerling] (https://www.jeffgeerling.com/blog/2022/its-dire-raspberry-pi-availability-tracker-launched) for that site. He's got amazing Raspberry Pi related content next to a bunch of high-quality Ansible playbooks, go give him a visit).
The eMMC edition I have can only be flashed if you put a jumper on a pin on the I/O board (to put the cm4 in a special mode, `nRPI_BOOT`) and use a special tool, [usbboot](https://github.com/raspberrypi/usbboot). [Jeff has a great guide](https://web.archive.org/web/20220226203155/https://www.jeffgeerling.com/blog/2020/how-flash-raspberry-pi-os-compute-module-4-emmc-usbboot) on flashing the cm4 eMMC edition. My `cm4` however, was not showing up whenever I put it in this special flashing mode. This article goes over the troubleshooting I did and the eventual solution (hint: hardware problem).

 Recently I removed all Google Ads from this site due to their invasive tracking, as well as Google Analytics. Please, if you found this content useful, consider a small donation using any of the options below: <a href="https://leafnode.nl">I'm developing an open source monitoring app called Leaf Node Monitoring, for windows, linux & android. Go check it out!</a> <a href="https://github.com/sponsors/RaymiiOrg/">Consider sponsoring me on Github. It means the world to me if you show your appreciation and you'll help pay the server costs.</a> <a href="https://www.digitalocean.com/?refcode=7435ae6b8212">You can also sponsor me by getting a Digital Ocean VPS. With this referral link you'll get $100 credit for 60 days. </a> 

The Raspberry Pi Compute Module 4 (from now on abbreviated as `cm4`) has 2
versions, a lite edition without eMMC storage and one with onboard eMMC
storage. The lite edition supports booting from an SD card, the eMMC edition
does not. The eMMC cm4 does not have the SD pins wired up, so the microSD
slot on the cm4 I/O board is going nowhere.

<img src="/s/inc/img/j2-emmc-jumper.jpeg" alt="I/O board pin" width=400 height=300 />

> eMMC boot pin jumper, picture via [Jeff Geerling][2]

### The issue

I prepared the board with a jumper, micro USB cable and installed
the `rpiboot` tool, all as [per the official documentation][5].

But when I powered on the board, no USB device showed up. The
tool kept hanging on `Waiting for BCM2835/6/7/2711...`.

The strange thing however was that the cm4 module booted up fine,
I saw Raspbian on my HDMI display, network was available and I
could `ssh` into the cm4 just fine. Only when I tried to flash
the storage it failed. The red 'D1' LED turned on, no green ACT led,
but no USB device shows up.

Sometimes I did get `dmesg` logs on Linux, but they were full of errors:

usb 1-5: new full-speed USB device number 17 using xhci_hcd
usb 1-5: Device not responding to setup address.
usb 1-5: Device not accepting address 8, error -71
usb 1-5: device descriptor read/64, error -71
usb usb1-port5: unable to enumerate USB device
usb usb1-port5: attempt power cycle

I didn't always get log errors like this, sometimes nothing happened.

* I tried a different power supply (12v, 2A) but that didn't help. Board
booted just fine, but no USB flashing.
* I tried a few different Micro USB cables.
* I tried a Windows PC. Installed drivers, but no storage / usb appeared.
* Tried a USB 2.0 port as opposed to a USB 3 port.
* Tried a different Linux version (Debian vs. Arch)

I found [this topic][5] on the Raspberry Pi forums where they received a
broken module, a new one (swapped by Farnell) worked just fine. I was running
out of options to try, so I was on the brink of requesting a waranty swap of
my module.

The weirdest part was that the cm4 worked just fine in normal mode, Raspbian
showed no errors, everything worked, except for the eMMC flashing.

### The solution

**The cm4 was not mounted correctly in the I/O board, it was screwed in too tight.**

I used m2.5 standoffs to screw the compute module into the I/O board. These
were so tight, that the compute module was not flat, but a bit convex. Not a
lot, but still visibly convex (not flat).

I'm used to screwing in modules, as at work we also have a SOM module that
does require tight screws. That is a SO-DIMM socket however, the compute
module 4 has two high-speed, high-density 100-pin mezzanine connectors.

I saw a video of Jeff where he just clicked in the cm4, no
screwing whatsoever, so I took a closer look at my module, and decided to try
it without screws.

After removing the screws and re-seating the board (just a click, no screws),
the issues went away and I can now flash the board as intended with `rpiboot`:

$ sudo ./rpiboot
RPIBOOT: build-date Feb 22 2022 version 20220208~181027 042cd145
Waiting for BCM2835/6/7/2711...
Loading embedded: bootcode4.bin
Sending bootcode.bin
Successful read 4 bytes
Waiting for BCM2835/6/7/2711...
Loading embedded: bootcode4.bin
Second stage boot server
Loading embedded: start4.elf
File read: start4.elf
Second stage boot server done

This is `dmesg` output when everything is working correctly:

usb 3-1.2: new high-speed USB device number 34 using xhci_hcd
usb 3-1.2: New USB device found, idVendor=0a5c, idProduct=0001, bcdDevice= 0.01
usb 3-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 3-1.2: Product: Compute Module
usb 3-1.2: Manufacturer: Raspberry Pi
usb 3-1.2: SerialNumber: xxxxxxxx
usb-storage 3-1.2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 3-1.2:1.0
scsi 4:0:0:0: Direct-Access RPi-MSD- 0001 PQ: 0 ANSI: 2

So make sure your cm4 module is not screwed in tightly. It should be flat in the I/O
board, not convex.

Here's a photo of my cm4 after the [bootloader update was successful][7]:

![green screen][6]

[1]: /s/inc/img/j2-emmc-jumper.jpeg
[2]: https://web.archive.org/web/20220226203155/https://www.jeffgeerling.com/blog/2020/how-flash-raspberry-pi-os-compute-module-4-emmc-usbboot
[3]: https://github.com/raspberrypi/usbboot
[4]: https://web.archive.org/web/20220223025655/https://www.raspberrypi.com/documentation/computers/compute-module.html#setting-up-the-cmio-board
[5]: https://web.archive.org/web/20220226205117/https://forums.raspberrypi.com/viewtopic.php?t=82905
[6]: /s/inc/img/cm4-green-bootloader.jpg
[7]: https://web.archive.org/web/20220226205626/https://www.jeffgeerling.com/blog/2022/how-update-raspberry-pi-compute-module-4-bootloader-eeprom

---

License:
All the text on this website is free as in freedom unless stated otherwise.
This means you can use it in any way you want, you can copy it, change it
the way you like and republish it, as long as you release the (modified)
content under the same license to give others the same freedoms you've got
and place my name and a link to this site with the article as source.

This site uses Google Analytics for statistics and Google Adwords for
advertisements. You are tracked and Google knows everything about you.
Use an adblocker like ublock-origin if you don't want it.

All the code on this website is licensed under the GNU GPL v3 license
unless already licensed under a license which does not allows this form
of licensing or if another license is stated on that page / in that software:

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.

Just to be clear, the information on this website is for meant for educational
purposes and you use it at your own risk. I do not take responsibility if you
screw something up. Use common sense, do not 'rm -rf /' as root for example.
If you have any questions then do not hesitate to contact me.

See https://raymii.org/s/static/About.html for details.