### iAtkos S3 v2: Mac Snow Leopard for PC's
* DL #1: Snow Leopard 10.6 Install DVD ".ISO" image. For unsupported
AMD/Intel PC hardware, only.
Thanks @Jatoba for adding this .iso.
* DL #2: Extracted BCM Network patches: For using in other Snow Leo
Hackintosh builds.
Only necessary if you have BCM chipsets.
> ### Confirmed Working:
>
> GUID Partition works very well
>
> ASUS COMMANDO Motherboard
> Pentium 4 3.8Ghz EM64T
> 4GB DDR2 Crucial Ballistix Ram
> 1GB DDR2 NVidia 9500GT
> Creative Sound Blaster Audigy 2 se (not working,no kext available
> yet)
> Replaced with an old C-Media card
> Used [kext helper B7][1] to install the driver from
>
http://www.kexts.com/
> (CMI8738PCIAudioDriver kext )
> Now I have fully working sound in/out and Mic .
>
> SETTINGS I USED:
> Boot loader - Use Chameleon v2 RC5 (uncheck all others)
> Boot loader Options - 32bit boot
> -Graphics Enabler
> USB - usb fix
> PATCHES -Extra directory (Uncheck this or it will not install )
> \- fakesmc
> \- disabler
> \- RTC-RTC (choose first one)
> MODIFIED KERNELS - qoopz 10.3.0
> DRIVERS :
> MAIN HARDWARE - SATA/IDE - Intel SATA/IDE
>
> UNCHECK THE SOUND ( Important ) It will not work with this checked.
>
> You can load the driver kext for your card later manually with kext
> helper B7
> UNCHECK VGA
> NETWORK - Wired - Marvell - Marvell Yukon 88E8001
> ANYTHING ELSE LEAVE AS IT IS.
> It will update to 10.6.4 from combo update by going to the apple
> website and downloading from there.(you will need this before you
> can update to 10.6.5 )
>
> NOTE :The 10.6.5 update knocks out the USB's. Here's the Fix:
>
> To update to 10.6.5 : Open Finder- Open your drive- Open System-
> Open Library- Open Extensions- find IOUSBFamily.kext and copy it to
> desktop.
> Go to the Apple website support page and download and install the
> 10.6.5 update not the combo one. Do not reboot. Open kext helper b7
> ,drag the IOUSB.kext and drop it in the box,hit easy install. reboot
> you should have no usb problem.
>
> Reboot until the chameleon shows press f 8 choose the first apple
> and press the down arrow and choose to boot with -v or -f
>
> ?Comments from OSX86 forums (long-gone link lost, sorry)
See Also: [JaS 10.4.8 (Tiger)][2], [iAtkos v7 (Leopard)][3]
Compatibility
Architecture: x86 (Intel:Mac)
Requires older PC hardware with Dual Core CPU, DDR2 memory, etc.
[1]:
http://macintoshgarden.org/apps/kext-helper-b7
[2]:
http://macintoshgarden.org/apps/osx-tiger-jas-1048
[3]:
http://macintoshgarden.org/apps/iatkos-v7-leopard
