This is HyperCard 2.4.1 Installer. Stuffied with 1.5.1 and new image
created with DiskCopy 6.3.3 Verified to install and work on System
7.1, on real Macintosh Hardware (SE/30).

The original HC 2.4.1 is a monster 45 _megs_ - this is 32k on disk
(may show larger on modern system).

I wanted to upload it for people who don't need all the crazy extra
stuff in the 45m version - i.e. Acrobat, System 8 utils and other
large docs. On my SE/30 this was very manageable and let me run some
of the newer Stacks that need 2.x.

Compatibility
Architecture: 68k PPC

System 6.0.5 or later requires at least 2 MB of RAM
System 7 or later requires 4 MB of RAM
8 MB of RAM required for Power Macintosh computers.
Note: System 7 or later is required to run the v2.4.1 Installer;
System 6.0.5 or later can use the software. HyperCard 2.4.1 runs fine
on System 6.0.5 or newer, but requires installing on a 7.x system
first.

You are viewing proxied material from phytocodex.porcupine.club. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.