This is a CD-ROM image of an Apple HyperCard Sales Tool and Demo disc.
It is labeled version 2.3 and has a date of May 1995.
It is archived here in a vintage Macintosh friendly .toast CD image
format. This image file can be mounted via the Adaptec / Roxio Toast
software, the Virtual CD/DVD-ROM Utility or by Apple's Disk Utility
and similar applications on PowerPC and (most) Intel Macintosh
systems.
From the Read Me file on the disc:
"SYSTEM AND MEMORY REQUIREMENTS
Macintosh with 12 Mb RAM and 20 Mb free hard drive space.
An Apple� Macintosh, Power Macintosh?, or PowerBook� computer with a
68040 or later microprocessor.
A hard disk drive.
HyperCard's memory partition should be set to at least 3072K to use
the Color Tools (5120K on Macintosh Computers with PowerPC
microprocessors with virtual memory off). HyperCard's memory partition
should be set to 3072K, or more, to use the Color Painting Tools
(5120K on Macintosh Computers with PowerPC microprocessors with
virtual memory off).
\------------------------
SOFTWARE REQUIREMENTS
System software 7.0 or later is required for this demo.
Be sure that you installed all extensions, one at a time into the
System Folder as noted in the installation above.
HyperCard must be setup properly for the this demo to work. Setting up
HyperCard properly requires that you have installed both Color Tools
and AddMotion II. Confirm this by launching HyperCard and look at the
Home stack. You should see both the Color Tools and AddMotion II
buttons. They should say they are on. If this is not the case, launch
the Color Tools stack in the HyperCard folder and choose install. Do
the same with the AddMotion II stack.
