These files were recovered from a hard drive. They contain Anubis RAID
version 1.36 and PowerControl version 1.07. These seem to be released
between the summer of 1997 and the spring of 1998.

Download #1: A .sit compressed folder (via DropStuff v5.5) containing
Anubis RAID and PowerControl
Download #2: A .mar compressed folder (via Mar v0.20) containing
Anubis RAID and PowerControl

Below is a quote form the Read Me file:

> Installation
>  \------------
>  Your floppy diskette should contain 3 items: The Anubis RAID
> Utility, PowerControl and this Read Me document. Your Anubis RAID
> Utility and PowerControl should be placed in a convenient area on
> your hard disk. It is recommended that you run the Anubis RAID and
> PowerControl utilities directly from your hard disk.
>
> System Requirements
>  \-------------------------
>  The Anubis RAID Utility is compatible on any Macintosh Plus model
> or higher running system 6.0 or higher, with at least 2 MB of free
> RAM.
>
> The Anubis RAID Utility fully supports the Power Macintosh line of
> computers including new PCI-based Power Macintosh models. It is
> recommended that for optimum performance you set up your array on a
> SCSI Manager 4.3 Macintosh. SCSI Manager 4.3 is found in all Power
> Macintosh models, as well as the Quadra 660 AV and Quadra 840 AV.
>
> The Anubis RAID Utility requires no system extensions to operate
> properly. An array created with Anubis RAID can be transported to
> virtually any Macintosh and run efficiently.
>
> Compatibility
>  \--------------
>  Anubis RAID is compatible with virtually all SCSI, Fibre-Channel
> and SSA disk mechanisms, including removable drives. Anubis RAID
> allows you to stripe, span or mirror either fixed disk or removable
> drives, including Optical, Jaz, MCD, Avatar and SyQuest. Removable
> drives are handled in the same manner as fixed disk drives under
> Anubis RAID.

Compatibility
Architecture: 68k PPC