(C) PLOS One
This story was originally published by PLOS One and is unaltered.
. . . . . . . . . .



Broad protective vaccination against systemic Escherichia coli with autotransporter antigens [1]

['Yikun Xing', 'Department Of Molecular Virology', 'Microbiology', 'Baylor College Of Medicine', 'Houston', 'Texas', 'United States Of America', 'Tailor Labs', 'Vaccine Development Group', 'Justin R. Clark']

Date: 2023-05

Extraintestinal pathogenic Escherichia coli (ExPEC) is the leading cause of adult life-threatening sepsis and urinary tract infections (UTI). The emergence and spread of multidrug-resistant (MDR) ExPEC strains result in a considerable amount of treatment failure and hospitalization costs, and contribute to the spread of drug resistance amongst the human microbiome. Thus, an effective vaccine against ExPEC would reduce morbidity and mortality and possibly decrease carriage in healthy or diseased populations. A comparative genomic analysis demonstrated a gene encoding an invasin-like protein, termed sinH, annotated as an autotransporter protein, shows high prevalence in various invasive ExPEC phylogroups, especially those associated with systemic bacteremia and UTI. Here, we evaluated the protective efficacy and immunogenicity of a recombinant SinH-based vaccine consisting of either domain-3 or domains-1,2, and 3 of the putative extracellular region of surface-localized SinH. Immunization of a murine host with SinH-based antigens elicited significant protection against various strains of the pandemic ExPEC sequence type 131 (ST131) as well as multiple sequence types in two distinct models of infection (colonization and bacteremia). SinH immunization also provided significant protection against ExPEC colonization in the bladder in an acute UTI model. Immunized cohorts produced significantly higher levels of vaccine-specific serum IgG and urinary IgG and IgA, findings consistent with mucosal protection. Collectively, these results demonstrate that autotransporter antigens such as SinH may constitute promising ExPEC phylogroup-specific and sequence-type effective vaccine targets that reduce E. coli colonization and virulence.

Extraintestinal pathogenic Escherichia coli is the leading cause of adult life-threatening sepsis and urinary tract infections. A vaccine against E. coli is essential to both prevent the spread to susceptible hosts and reduce death and disease. Using a comprehensive computational virulome and metagenomics approach, we identified a surface-exposed, pathogen-specific autotransporter protein, SinH, as a potential vaccine candidate for E. coli infection. The known virulence functions of autotransporters include adhesion, aggregation, and invasion, all critical functions for systemic dissemination, thus highlighting their potential as prophylactic vaccines. We found that vaccination with SinH-based recombinant antigens is sufficient to elicit a broad protective immunity against colonization, bacteremia, and acute urinary tract infection while also lowering the risk of translocation from the intestinal tract. Induction of both systemic and mucosal antibodies likely play a role in protection against infection. The targeting of autotransporters shows promise to combat the increasing global burden caused by multi-drug resistant pathogens, especially against highly pleiotropic bacteria such as Escherichia coli.

Data Availability: The alignment data between domains 1 and 2 of SinH and the domains of SinH from solved structures of invasin and intimin have been deposited at Dryad dataset repository with the name “Structure Prediction: SinH full length” and the digital object identifiers (DOI) ( https://doi.org/10.5061/dryad.jm63xsjfx ). The data package has been cited in the reference and methods section in the manuscript as “Chang J, Xing Y. Structure Prediction: SinH full length [dataset]. 2023 Jan 6 [cited 2023 Jan 22]. Dryad Digital Repository. Available from https://datadryad.org/resource/doi:10.5601/dryad.jm63xsjfx .” All other relevant data are within the manuscript and its Supporting Information files.

Building off the work of others [ 37 ], we established criteria for the selection of vaccine candidates, including that the antigens be (i) pathogen-specific (able to identify the pathogenic E.coli from commensals), (ii) surface-exposed (to be able to be recognized by the immune system), have (iii) high prevalence in clinical isolates (since these strains contain pleiotropic virulence which makes monovalent antigen identification more challenging), (iv) be involved in critical steps in E. coli pathogenesis, including either adherence, invasion, translocation, or survival and growth in blood or urine and finally (v) facilitate robust production that is scalable and economic. Our lab has screened a collection of 107 complete E. coli genome sequences representing all defined phylogroups and established a manually curated database housing the genetic information of many virulence factors from E. coli and other pathogenic bacteria. This allowed for a heat-map like approach that facilitated the identification and frequency of genes and alleles across phylogroup, sequence type, and pathotype. Of the approximate 400 virulence factors assessed from this test group, and scaled for over 20,000 additional genomes in public databases, a gene encoding for a structural invasin-like autotransporter protein [ 38 ], termed sinH, was observed to be widely distributed in ExPEC pathotypes and ExPEC-associated phylogenetic group B2/D. Of particular interest, this gene is not commonly found in putative commensal E. coli or phylogenetic groups associated with systemic dissemination [ 39 ]. AlphaFold2 and homology analysis predicted SinH structure to resemble that of invasin of Y. pseudotuberculosis or intimin of Enterohemorrhagic Escherichia coli, with three Ig-like domains of SinH predicted to be extracellular. sinH was also highly prevalent in clinical E. coli isolates obtained from pyelonephritis and urosepsis patients [ 38 , 40 ]. Furthermore, a recent paper indicates the sinH gene is upregulated during urinary tract infections in women, and the sinH mutant strain displayed a significant fitness defect and inflammation reduction in the bladder in the murine model of ascending UTI [ 38 ]. Based on the comparative genomic and AlphaFold simulated protein structure information and the critical function of this gene for bladder colonization and E. coli infection, we believe SinH is a potential vaccine candidate for E. coli infection. Here we present data that suggests SinH elicits robust and broad protection from various ExPEC strains and sequence types in multiple murine models of infection.

An ExPEC-specific vaccine would provide a prophylactic option to reduce mortality associated with severe E. coli infections. Indeed, several groups have sought to induce protective immunity against pathogenic E. coli with efforts focused on heat-killed inactivated bacteria vaccines or conjugates of O-antigens to elicit protective immune responses [ 19 – 22 ]. However, due to the failure of heat-killed inactivated bacterial vaccines to prevent uncomplicated UTI and the antigenic heterogeneity of the surface polysaccharide of the E. coli, these attempts have had limited further development [ 19 , 21 – 24 ]. Recent studies indicate that some surface-exposed molecules, such as FimH adhesin (Type I fimbriae adhesin) [ 25 – 27 ], P fimbriae (PapDG complex), Dr fimbriae [ 26 , 28 – 30 ], iron receptors (FyuA, Hma, lutA, IreA) [ 31 – 35 ], adhesin FdeC [ 28 ], or siderophores (iron-chelating compounds) [ 36 ] have been shown to induce protective immunity. Despite numerous anti-E. coli vaccine studies spanning greater than five decades, no E. coli vaccine has been approved by the US FDA. Therefore, there is an urgency to identify a novel, phylogroup-specific, conserved, immunogenic, and protective vaccine against ExPEC.

The emergence and increasing prevalence of multidrug-resistance (MDR) ExPEC strains are considered one of the primary drivers behind the global antimicrobial resistance (AMR) crisis [ 13 ]. This crisis adds millions of AMR infections annually and a 20-billion-dollar surplus in direct healthcare costs in the United States [ 14 ]. A single ExPEC clone, sequence type 131 (ST131), produces an extended-spectrum β-lactamase (ESBL), specifically an enzyme named CTX-M-15, which has fueled the emergence of resistance ExPEC strains globally [ 15 , 16 ]. Additionally, unlike the other non-ST131 ESBL-producing E. coli lineages (ST38, ST405, and ST648), ST131 genomes showed unique virulence profiles. For example, the presence of several serine proteases, autotransporters, and UPEC-specific virulence genes were identified exclusively in ST131 isolates [ 17 ]. Furthermore, ST131 has an expanded number of virulence genes in contrast to the non-ST131 isolates, which shared similar but varied and lower numbers of virulence genes [ 7 , 17 ]. These advantages possess the ability of ST131 to make a balance between broad colonization, virulence, and antibiotic resistance without a fitness cost, which might serve as the potential driver of ST131 success in causing an enormous number of human infections globally [ 7 , 17 ]. In the U.S., the ST131 clonal group is now considered the most prevalent and extensively dominant antimicrobial-resistant E. coli strain overall [ 18 ].

Extraintestinal pathogenic E. coli (ExPEC) is the leading cause of invasive bacteremia and urinary tract infections (UTI), and the second leading cause of neonatal meningitis [ 1 , 2 ]. In human intestinal microbiota, the ExPEC group includes uropathogenic E. coli (UPEC), neonatal meningitis E. coli (NMEC), and sepsis-associated E. coli (SEPEC) [ 3 – 6 ]. ExPEC acquired specific virulence factors that confer them an ability to cause infections at nonintestinal alternative ecological niches, such as the urinary tract, bloodstream, and prostate [ 7 , 8 ]. Clinically, from 1999-to 2014, 6% of all deaths in the U.S. were sepsis-related deaths [ 9 ]. ExPEC is still the most common gram-negative organism resulting in severe sepsis, which caused 20% of severe sepsis cases from 1999-to 2008 [ 10 ]. In addition, septic patients represent a disproportionately high burden in cost and hospital utilization. In 2013 alone, nearly over 970,000 sepsis cases were admitted annually in the U.S, and sepsis accounted for more than $24 billion in hospital expenses, representing 13% of total U.S. hospital costs [ 11 ]. A recent report assessing 204 countries and territories showed antibiotic-resistant pathogenic E. coli to be a leading cause of mortality associated with drug resistance (approximately 200,000 deaths attributable to AMR E. coli and approximately 800,000 deaths associated with AMR E. coli in 2019) [ 12 ].

Graphing and statistical analyses were performed using Graphpad Prism version 9 (GraphPad Software, Inc.). Significance was determined using the Kruskal-Wallis analysis of variance (ANOVA) with Dunn’s multiple comparisons correction. All survival curves were compared using the Genhan-Breslow-Wilcoxon curve comparison. All statistics were conducted using 95% confidence intervals, alpha values were set to 0.05 and statistical significance was determined if calculated P values were below 0.05. The lines of all the bar graphs were at the median with a 95% confidence interval (CI). One star (*) P < 0.05, two stars (**) P < 0.01, three stars (***) P < 0.001, four stars (****) P < 0.0001. The Box-and-whisker plots and Kaplan Meier survival curves were exported from Graphpad Prism 9 and annotated using BioRender.

For the indirect enzyme-linked immunosorbent assay (ELISA), 100 μl of 20 μg/ml or 2 μg/ml purified proteins were coated onto Thermo Fisher 96-well Nunc plates and incubated at 4°C overnight. The plate was washed three times by flooding all wells with wash buffer (0.05% Tween 20 in 1× PBS), and nonspecific binding sites were blocked with 150 μl 5% milk solution in 1× PBS for 2 hours. Serum was taken from individual mice after complete immunization and ExPEC infection and urine were taken from individual mice after complete immunization. Then the wells were coated with serum diluted 1:5000 in 5% milk or 50 μl undiluted urine, and the plate was incubated with gentle rocking overnight at 4°C. The following day, the plate was washed three times with wash buffer, and then a volume of 100 μl secondary antibodies (anti-mouse IgG generated in rabbit conjugated to horseradish peroxidase, diluted in 1:5000 in 1× PBS or anti-Mouse IgA Cross-Adsorbed Secondary Antibody generated in goat, diluted in 1:2000 in 1× PBS) was added into each well, and entire sample gently rocked at 4°C for 1 hr. The plate was washed 3 times with wash buffer and 1× PBS before 100 μl TMB (3,3’,5,5’-Tetramethylbenzidine) solution was added to the wells and allowed then incubate at room temperature for 5 to 10 minutes until color developed. The reaction was stopped by adding 50 μl 2M sulfuric acid (H 2 SO 4 ) to the well. The absorbance of each well was measured at 450 nm by using the BioTek Synergy HT plate reader [ 55 ]. All experiments were performed with three replicates, and ELISA readouts were normalized to the same mole.

Different sequence-type (ST) of ExPEC strains were grown and prepared under the indicated conditions as described in the previous model. Mice were injected intraperitoneally with 50 μl of a different sequence-type (ST) E. coli suspension, either ST73-mixture (Mix of CFT073, W0040, W0088, W0116 equally) or ST95-mixture (Mix of UTI89 and W0060 equally) (in total 5 × 10 7 CFU of each mixture), on day 42 [ 56 ]. The inoculum was quantified by plating dilutions onto LB agar. Mice were monitored twice a day for 5 days, and moribund animals were euthanized/necropsied to determine bacterial levels in the kidneys, spleen, and liver. Organs were homogenized in 1 ml 1× PBS using BeadBlaster Refrigerated Homogenizer and organ homogenates were plated on LB agar plates and incubated at 37°C to determine the number of bacteria or CFU per milliliter (mL). Moribundity was determined through the observation of multiple features, including rough coat, hunched posture, lethargy and hyperpnea. The schematic diagram was made in BioRender.

ExPEC sequence type 131 (ST131) strains were grown and prepared under the indicated conditions. Mice were subjected to gavage with 100 μl of a bacterial suspension (10 9 CFU) with a sterile (20-gauge, 38-mm-long) flexible needle on day 42. The inoculum was quantified by plating dilutions onto LB agar. Then cyclophosphamide (Cytoxan [CTX]) (United States Pharmacopeia) was dissolved in sterile water and diluted with filter-sterilized 1× PBS to a final concentration of 10 mg/ml, and the mice were given a total dose of 450 mg/kg of body weight (three 150-mg/kg doses administered at 1-day intervals (day 43, 45, 47) intraperitoneally (i.p.) at the indicated time points [ 56 , 58 ]. On the day of 48, mice feces were collected and homogenized in 1 ml 1× PBS using BeadBlaster Refrigerated Homogenizer and feces homogenates were plated on LB agar plates and incubated at 37°C to determine the number of bacteria or CFU per milliliter (mL). The schematic diagram was made in BioRender.

ExPEC sequence type 131 (ST131) strains were grown and prepared under the indicated conditions. Mice were subjected to gavage with 100 μl of a bacterial suspension (10 9 CFU) with a sterile (20-gauge, 38-mm-long) flexible needle on day 42. The inoculum was quantified by plating dilutions onto LB agar. After twenty-four hours, mice feces were collected and homogenized in 1 ml 1× PBS using BeadBlaster Refrigerated Homogenizer (Benchmark Scientific Inc, Sayreville, NJ, USA) and feces homogenates were plated on LB agar plates and incubated at 37°C to determine the number of bacteria or CFU per milliliter (mL). The schematic diagram was made in BioRender.

UPEC strains, UTI89 and CFT073, were grown and prepared under the indicated conditions. On day 42, Mice were inoculated transurethrally by 50 μl of one of the UPEC strains suspension (10 8 CFU) as described previously [ 57 ]. The inoculum was quantified by plating dilutions onto LB agar. After twenty-four hours, mice were euthanized and necropsied to collect bladders. Bladders were homogenized in 500 μl 1× PBS using BeadBlaster Refrigerated Homogenizer and organ homogenates were plated on LB agar plates and incubated at 37°C to determine the number of bacteria or CFU per milliliter (mL). The schematic diagram was made in BioRender.

For the mortality study, ExPEC sequence type 131 (ST131) strain JJ2050 was grown under the indicated conditions the day before injection as described above. On the day of injection (day 42), mice were injected intraperitoneally with 50 μl of the ExPEC strain JJ2050 suspension (5 × 10 7 CFU) [ 56 ]. Mice were monitored twice a day for 10 days. Murine survival was followed with time, and moribund animals were euthanized/necropsied to determine bacterial levels in the kidneys, spleen, and liver. The organs were homogenized, and the JJ2050 bacterial load in the infected organs was quantified by the determination of CFU. The schematic diagram was made in BioRender.

ExPEC sequence type 131 (ST131) strains, JJ1886, JJ2050, and JJ2547, were grown under the indicated conditions the day before injection. On the day of injection (day 42), the optical density (OD) was measured using a spectrophotometer set to 600 nm, and the overnight ExPEC strains were subcultured in LB broth at the ratio of 1:100 to an OD600≈0.6 (Log phase, ~1 × 10 8 CFU/ml). Then ExPEC strains were harvested by centrifugation (3,500 × g for 20 min at 4°C) and resuspended in equivalent 1× PBS. Mice were injected intraperitoneally by 50 μl of one of the ExPEC strains suspension (5 × 10 7 CFU) on day 42 [ 56 ]. The inoculum was quantified by plating dilutions onto LB agar. After twenty-four hours, mice were euthanized and necropsied to collect their kidney, spleen, and liver. Organs were homogenized in 1 ml 1× PBS using BeadBlaster Refrigerated Homogenizer (Benchmark Scientific Inc, Sayreville, NJ, USA) and organ homogenates were plated on LB agar plates and incubated at 37°C to determine the number of bacteria or CFU per milliliter (mL). The schematic diagram was made in BioRender.

The mouse strain used in this study was BALB/cJ mice (Jackson Laboratories, Bar Harbor, ME). All mice were female, 6 weeks of age. They received sterile food and water ad libitum and were housed 3–4 in filtered cages. All methods performed on mice were approved in accordance with relevant guidelines and regulations from “The Guide and Care and Use of Laboratory Animals” (National Institute of Health) and approved by Baylor College of Medicine’s Institutional Animal Care and Use Committee (AN-5177).

A total of 334 sinH nucleotide sequences were extracted using megaBLAST to align the ST131 reference sinH sequence with our previously published phylogroup database of 1,348 E. coli chromosomes [ 39 , 53 ]. Once the sinH sequences were extracted, they were translated and sequences with premature stop codons were removed, leaving 308 sequences. In addition to these strains, the sinH nucleotide sequence from 26 sinH positive E. coli strains available in the Maresso lab were also extracted and translated, and duplications between the two datasets were removed. As an outgroup, Salmonella SinH amino acid sequence was used (accession: WP_023204198.1). Extracted SinH amino acid sequences were then aligned using MAFFT (version 7.450) with default settings and the “auto” setting for algorithm selection. The resulting amino acid alignment was then used to create a phylogenetic tree with RAxML (version 8) with the GAMMA BLOSUM62 protein model and the Rapid Bootstrapping algorithm with 100 replicates [ 54 ]. The resulting trees were then used to create a consensus tree with 50% support threshold using the Consensus Tree Builder software in Geneious version 2022.0 created by Biomatters. The consensus tree was then annotated in BioRender. The SinH amino acid sequence from strains available to the lab were also aligned and a phylogenetic tree created using the same MAFFT and RAxML method outlined above. This alignment was exported from Geneious and annotated using BioRender.

The nucleotide sequence of SinH was used to recreate the translated amino acid sequence using ExPASy. All six possible reading frames (three forward, three backward) were generated and the frame that had the sequence for complete SinH was used as the amino acid sequence for structure prediction. ColabFold’s AlphaFold2-Advanced Google Notebook (Google, Mountain View, CA) was used to generate predictions from amino acid sequence [ 44 ]. For multiple sequence alignment (MSA) necessary to build the consensus model for the structure of SinH, we used DeepMind’s (DeepMind, London) original MSA jackhammer database previously generated for CASP14 using the complete Protein Data Bank (PDB) structure library [ 44 – 46 ]. Five prediction runs were run, with each run using a randomly chosen initiation point for the start of prediction runs. These models were ranked using the following two metrics: 1. pLDDT (predicted lDDT-Cα) with its ability to quantify the confidence of model per residue calculated by utilizing distances between Cα atoms in multiple reference models, and 2. AlphaFold-generated PAE (Predicted Aligned Error) for every residue, a numerical value of expected position error per residue [ 47 ]. The model with highest average pLDDT and lowest PAE was chosen as the best predicted structure of SinH. This structure was compared against previously solved structures of proteins deposited on PDB with similar functions by aligning spatial coordinates of models through RCSB Structural Alignment webserver, with the jFATCAT-rigid algorithm for alignment and TM-score as the metric for assessing alignment quality [ 48 – 50 ]. UCSF ChimeraX was used for analyzing structural features of the predicted model, determining local physical properties within domains, and visualizing the model [ 51 ]. BioRender was used for annotating models. Structure Prediction: SinH full length [dataset]. 2023 Jan 6 [cited 2023 Jan 22]. Dryad Digital Repository. Available from https://datadryad.org/resource/doi:10.5601/dryad.jm63xsjfx [52 ].

The purified protein lysate was resolved on NuPAGE 10% Bis-Tris Gel (Life Technologies, Carlsbad, CA), target band (~40 kDa and ~70 kDa size) was excised and processed for in-gel digestion using trypsin enzyme. The tryptic peptides were analyzed on nano-LC 1000 system (Thermo Fisher Scientific, San Jose, CA) coupled to Orbitrap Fusion mass spectrometer (Thermo Fisher Scientific, San Jose, CA). The peptides were loaded on a two-column setup using a pre-column trap of 2 cm x 100 μm size (Reprosil-Pur Basic C18 1.9 μm, Dr. Maisch GmbH, Germany) and a 20 cm x 75 μm analytical column (Reprosil-Pur Basic C18 1.9 μm, Dr. Maisch GmbH, Germany) with a 110 min gradient of 2–30% acetonitrile/0.1% formic acid at a flow rate of 200 nl/min. The eluted peptides were directly electro-sprayed into mass spectrometer operated in the data-dependent acquisition (DDA) with top 35 mode. The full MS scan was acquired in Orbitrap in the range of 300–1400 m/z at 120,000 resolutions followed by MS2 in Ion Trap (HCD 30% collision energy) with 5 sec dynamic exclusion time. The RAW file from mass spectrometer was processed with Proteome Discoverer 1.4 (Thermo Scientific) using Mascot 2.4 algorithm (Matrix Science) with Fixed Value PSM validator against the recombinant GST-SinH protein sequence. The precursor ion tolerance and product ion tolerance were set to 20 ppm and 0.5 Da respectively. Maximum cleavage of 2 with Trypsin enzyme, dynamic modification of Oxidation on methionine, protein N-terminal Acetylation and Destreak on cysteine was allowed.

Both recombinant proteins were produced by E. coli BL21(DE3) cultured in Lysogeny broth (LB) to an optical density at 600 nm (OD 600 ) of 0.6–0.8. The gene expression was induced with 1mM Isopropyl β-D-1-thiogalactopyranoside (IPTG) (Sigma-Aldrich, St. Louis, MO) and the culture was then incubated overnight at 30°C. The cells were harvested by centrifugation (10,000 × g for 30 min at 4°C), and bacterial pellets were resuspended in 1× phosphate-buffered saline (PBS). Bacterial suspensions were lysed by two passages through a French pressure cell press (1500 PSIG) (Thermo Scientific, Waltham, MA) and the lysate was cleared by centrifugation (16,000 × rpm, for 60 min at 4°C). GST fusion proteins in the supernatant were filter-sterilized (0.22 μm) and purified using an immobilized glutathione Sepharose column (Cytiva, Marlborough, MA) under native conditions according to the manufacturer’s instructions. Antigens were eluted by the high concentration of reduced glutathione (GSH) (Sigma-Aldrich, St. Louis, MO), and then proteins were concentrated using 10 kDa Centrifugal Filter Units (Millipore Sigma, Burlington, MA). All elutions were subjected to SDS-PAGE, and concentration was determined using the Nanodrop (Thermo Scientific, Waltham, MA) and Bradford assay.

The genes encoding the candidate vaccine antigens were cloned from ExPEC sequence type 131 (ST131) strain JJ1887 genomic DNA (SinH-Ig-like domains-123, encoding the C-terminal passenger Ig-like domains-1,2 and 3 fragments of sinH, amino acid residues 337 to 724, hereinafter called SinH-123; SinH-Ig-like domains-3, encoding the C-terminal passenger Ig-like domain-3 fragment of sinH, amino acid residues 602 to 724, hereinafter called SinH-3). Both candidate vaccine sequences were sent to the GENEWIZ company (South Plainfield, NJ) for plasmid construction. Both protein domains were cloned into the BamHI and SmaI restriction sites of pGEX-2TK to produce N-terminally glutathione-S-transferase (GST)-tagged fusions (GST-SinH-3, in short SinH-3 in following; GST-SinH-123, in short SinH-123 in following). The resulting constructs were verified by sequencing.

The E. coli strains used in this study were cultured overnight from a single colony in Lysogeny broth plate (LB; 10 g/l tryptone, 0.5 g/l sodium chloride (NaCl), and 5 g/l yeast extract) at 37°C after resuscitation from a frozen stock (−80 °C, 10% glycerol). ExPEC ST131 strains JJ1886, JJ2050, JJ2528, and JJ2547 were kindly provided by James R. Johnson [ 41 ]. Uropathogenic E. coli (UPEC) strains UTI89 (O18:K1:H7, ST95) [ 42 ] and CFT073 (O6: K2:H1; ATCC 118 #700928, ST73) [ 43 ] were kindly provided by Kathryn Patras. E. coli strains. W0060 (ST95-like), W0040, W0088, W0116 (ST73-like) were isolated from the blood or feces of hospitalized patients with bacteremia. The number of CFU delivered was calculated by correlating the OD at 600 nm to the number of colonies after plating.

Results

Identification of SinH as vaccine target Pathogenic Escherichia coli is a significant cause of global human morbidity and mortality. The overarching vaccine challenge with this pathogen is its propensity to readily take in or lose genes associated with antibiotic resistance and virulence, in addition to a pangenome that deviates by as much as 30% between strains [59,60]. Using a comparative genomics approach, we previously reported an analysis of sinH prevalence amongst E. coli pathotypes, phylogroups, and sequence types (Fig 1A). Pathotypes are groups of pathogenic strains that share the same phenotype of the disease, which broadly can divide into extraintestinal pathogenic E. coli (ExPECs) or intestinal pathogenic E. coli (InPECs) [4–6]. E. coli also is characterized by their genetic lineage into phylogenetic groups, of which there are four major (A, B1, B2, and D) and five minor (C, E, F, G, and cryptic clade I) [61–63]. The sequence types (STs) were established following the multilocus sequence typing (MLST) scheme of Achtman [64–66]. SinH was strongly associated with ExPECs pathotypes and also has a tight association with phylogroup B2/D/F/G (Fig 1A). B2 and D strains from this clade are a major source of ExPEC infections [67], suggesting that SinH might be associated with ExPEC infections directly or indirectly. In addition, the sinH sequence is also detected in B2 commensal strains, but not detected in A and B1 phylogroup commensal strains, which are the source of most human commensal E. coli strains [68]. Furthermore, our previous work verified the association of the sinH sequence with the phylogroup B2, where it is found in 98% of strains, but is also strongly associated with other phylogroups, such as phylogroup F (100%), G (100%), and D (67%) [39]. The B2 E. coli strains harboring the sinH sequence included all members of sequence type 131 (ST131), sequence type 73 (ST73), sequence type 95 (ST95), and sequence type 127 (ST127). These sequence types have become the most prevalent and common lineages in E. coli isolates that were recovered from the hospital and community patients with bacteremia or UTI worldwide [69–73]. Furthermore, we observed a phylogenetic relationship between all SinH protein sequences found in the previously curated database of 1,348 complete E. coli chromosome sequences [39]. SinH encoded by ST131 E. coli appear to have somewhat diverged compared to other ExPEC causing-sequence types of the B2 phylogroup such as ST73 (88.6% identical, 93.2% similar), ST95 (88.8% identical, 92.9% similar), and ST127 (90.6% identical, 95.2% similar), especially in domain 3 (Fig 1B and 1C). The ST131 allele appears to be nearly identical to those found in the F phylogroup, including the ExPEC-causing ST62 and ST648 sequence types, whereas SinH from other B2 strains is more similar to those from phylogroup D and G. The determination of all pathotypes, phylogroups and sequence type (ST) listed above was carried out by the scheme of our lab previous work [39]. The sinH sequences were located using megaBLAST (version 2.11). BLAST hits were elongated to the first stop codon, extracted, translated, and then aligned using MAFFT (version 7.450) (Fig 1B). The resulting alignment was used to create a phylogenetic tree was created using Geneious Prime’s Consensus Tree Maker using RAxML(version 8.2.11) trees with 100 bootstrap replicates (Fig 1C). Together, these results indicate that, while sinH has been evolving across different phylogroups, there is conservation within the same phylogroup. PPT PowerPoint slide

PNG larger image

TIFF original image Download: Fig 1. Comparative genomics heatmap, amino acid sequence alignment, and phylogenetic tree of sinH sequence. (A) Pathotype, phylogroup, sequence types of distribution of sinH sequence. Heatmap showing nonpathogenic E. coli, ExPECs and InPECs. Columns are organized by pathotypes, and rows are organized first by phylogroups, then by sequence types. Each cell in the heatmap is colored based on percent nucleotide identity compared to the reference used to generate the alignments, and the black boxes indicate there is no sequence type (ST) present for the listed pathotype whereas white boxes indicate there is a sequence type but it does not contain a sinH homolog. (B) MAFFT alignment of the amino acid sequence of SinH. Alignment is annotated with phylogroup and sequence type. An identity histogram is shown at the top, and black represents amino acid differences from the majority consensus. (C) Consensus maximum-likelihood phylogenetic tree of SinH generated from alignment shown in Fig 1B using RAxML and rooted with Salmonella SinH. Branch labels indicate percentage support from 100 rapid bootstrap replicates. The consensus tree and alignment were annotated in BioRender. https://doi.org/10.1371/journal.ppat.1011082.g001

Structural and functional analysis of SinH Recent work suggests that SinH shares a similar structural and evolutionary history with intimin and invasin as a virulence-associated bacterial outer membrane protein [74,75]. We used AlphaFold2 to predict the structure of full-length SinH and compared the structure (blue) to solved structures of Y. pseudotuberculosis invasin and Enterohemorrhagic (EHEC) Escherichia coli intimin to gain insights into the function of SinH in host-pathogen interactions. To determine the characteristics of surface-exposed of SinH, we used as Pairwise Structure Alignment at RCSB with the jFATCAT-rigid algorithm to align predicted SinH structures against existing structures from the Protein Data Bank (PDB) [48,49]. The predicted structure of full-length SinH is organized into four distinct domains (from left to right): translocation β-barrel transmembrane domain (purple), Ig-like domain-1 (green), Ig-like domain-2 (red), and Ig-like domain-3 (referred as the Receptor binding domain hereafter, blue). Also shown here is the calculated electrostatic density map (blue: positive charge, red: negative charge) for SinH (Fig 2A). To quantify the alignment of each SinH domain to known structures, we used a template modeling score (TM-score), a metric for assessing topological similarity of protein folds as calculated by distances between corresponding amino acid residues, which ranges in value from 0 to 1 with scores greater than 0.5 indicating two proteins generally having the same fold [76]. The TM-score for transmembrane β-barrel domains of SinH and Y. pseudotuberculosis invasin was 0.96 (PDB: 4E1S), while SinH and EHEC intimin was 0.95 (PDB: 4E1T) [77]. The SinH transmembrane domain also had amino acid sequence similarities of 66% to invasin and 62% to intimin, and these numbers are reflected upon the same fold these proteins assume (Fig 2B). The closest match to Ig-like domain 1 of SinH was domain-3 of Y. pseudotuberculosis invasin (PDB: 1CWV), with a TM-score of 0.54 that indicated high likelihood of the same protein fold [78]. Unlike transmembrane domains, the amino acid makeup of these structurally related domains differed considerably, with low sequence identity of 9% and similarity of 29%, which suggests divergence in amino acids between these two proteins that nonetheless conserved the structure fold (Fig 2C). This disparity between the fold and amino acid composition preservation was also observed when comparing Ig-like domain-2 of SinH to the domain-3 of Y. pseudotuberculosis invasin, with a TM-score of 0.55 with amino acid sequence identity of 13% and similarity of 24% (Fig 2D). This suggests that domain-2 also follows the trend of domain-1 in structural similarity and sequence dissimilarity to invasin. Given that the structures of domains 1 and 2 both matched to invasin domain 3, we aligned domains 1 and 2 of SinH against each other to confirm that these two domains have similar folds (DOI: https://doi.org/10.5061/dryad.jm63xsjfx). These two domains indeed had very similar structures (TM-score of 0.5), hinting that the role of domains 1 and 2 in SinH is to serve as a scaffold for positioning the receptor binding domain (RBD). In the Ig-like domain-3 (RBD) of SinH, a lectin-like domain is observed which incidentally is not found in both invasin and intimin. We thus decided to run the alignment between only RBD of SinH against its counterpart domains in invasin and intimin (PDB: 1F00) with a lectin-like domain to determine similarities in these analogous domains [79] (Fig 2E). Matching RBD to invasin gave TM-score of 0.45 with sequence identity of 10% and sequence similarity of 24%, while intimin gave TM-score of 0.41 with sequence identity of 8% and sequence similarity of 25%. On the other hand, aligning these domains from solved structures of invasin and intimin yielded high TM-score of 0.71 with sequence identity of 21% and sequence similarity of 37% (DOI: https://doi.org/10.5061/dryad.jm63xsjfx). These results suggest that the SinH RBD is phylogenetically more distant from invasin and intimin than these two are to each other as far as structure is concerned, a finding that hints that RBD of SinH may have a different function and target than invasin and intimin, where this Ig-like domain may participate in the binding of SinH to a novel receptor on the host. In summary, our alignment statistics of the predicted SinH structure indicate high structural similarity of the SinH to intimin and invasin even with very poor sequence homology, thus explaining why there are few reports linking these two genes expressing structurally very similar proteins. Our predictions of the surface-exposed Ig-like domains of SinH were supported by a recently published work, which demonstrated IatB (SinH) is located on the cell surface and contributes to biofilm formation [80].

SinH-based candidate antigens expression and purification In preparation for immunization, the genes for SinH-based antigens, SinH-3 (Ig-like domain-3 fragment of SinH, amino acid residues 602 to 724) and SinH-123 (Ig-like domain-1,2 and 3 fragments of SinH, amino acid residues 337 to 724) were cloned as glutathione-S-transferase (GST)-tagged fusions, expressed, and purified under native conditions as N-terminal GST-tagged recombinant proteins. Bacterial cultures expressing recombinant vaccine antigens were lysed, and supernatant which contained the SinH-antigens were collected. Recombinant proteins were purified by GST-affinity chromatography and visualized by SDS-PAGE. Two dominant bands assumed to be GST-SinH-3 and GST-SinH-123 (40 kDa, 70 kDa) were observed after Coomassie blue staining of the gels (Fig 2F). To verify their authenticity, the putative SinH-3 and SinH-123 proteins were subjected to Mass Spectrometry (S1 Fig). Purified protein bands were resolved and digested in gel. The tryptic peptides were analyzed on nanospray LC-MS (liquid chromatography-mass spectrometry) system. The eluted peptides were directly electro-sprayed into mass spectrometer and analyzed by data-dependent acquisition (DDA). For the GST-SinH-3, the coverage (the percentage of the protein sequence by identified peptides) was approximate 98%; and for the GST-SinH-123, the coverage was approximate 97% (S1 Fig). In summary, high sequence coverage was detected in each band and was sufficient to confirm the identity of both GST-SinH-3 and GST-SinH-123 recombinant proteins (GST-SinH-3, in short SinH-3 in following; GST-SinH-123, in short SinH-123 in following). PPT PowerPoint slide

PNG larger image

TIFF original image Download: Fig 2. Structural alignment of predicted full-length SinH and expression and purification of SinH-based candidate antigens. Structural alignments were generated by Pairwise Structure Alignment webserver, and aligned structures were visualized using ChimeraX and annotated with BioRender. (A) Predicted structure of full-length SinH protein (excluding disordered residues 1 through 101) with four distinct domains (Translocation β-barrel transmembrane domain: purple, Ig-like domain-1: green, Ig-like domain-2: red, Ig-like domain-3 (Receptor binding domain): blue). (B) Alignment between transmembrane β-barrel domains of predicted SinH protein structure (blue) and transmembrane domains of Y. pseudotuberculosis invasin (PDB: 4E1T) (red, left) and EHEC intimin (PDB: 4E1S) (red, right). (C) Alignment between domain-1 of SinH (blue) and domain-3 of Y. pseudotuberculosis invasin (red). (D) Alignment between domain-2 of SinH (blue) and domain-3 of Y. pseudotuberculosis invasin (red). (E) Alignment between the receptor-binding domain (RBD) of SinH (blue) and Ig-like domain-1 of EHEC intimin (red, left) and Ig-like domain-4 of Y. pseudotuberculosis invasin (red, right). (F) Genes encoding SinH-based antigens (Ig-like domain-1,2,3 or Ig-like domain-3) were cloned from ExPEC ST131 strain JJ1887. SinH-based antigens were recombinantly expressed with a glutathione-S-transferase (GST) tag and purified using immobilized GST-affinity chromatography. Purified antigens were separated and analyzed by SDS-PAGE and stained with Coomassie blue stain buffer. Predicted sizes of tagged proteins are as follows: GST-SinH-3, 40 kDa; GST-SinH-123, 70 kDa. Circle symbols indicate the locations of the GST-SinH Domain-3 and GST-SinH Domain-123, respectively, for each individual gel. The SDS-PAGE were annotated in BioRender. https://doi.org/10.1371/journal.ppat.1011082.g002

Immunization with SinH-based antigens confers protection against ExPEC sequence type 131 (ST131) bacteremia ExPEC ST131 strains are drug-resistant and are responsible for millions of global antimicrobial-resistant (AMR) infections annually and comprise a significant risk of bloodstream infections worldwide [15,16]. To verify the protective efficacy of SinH-based antigens in a systemic model of ExPEC ST131 bacteremia, purified antigens were mixed with alum as an adjuvant at a ratio of 2:1 (antigen/alum), followed by subcutaneous immunization of mice with either antigens (SinH-3 or SinH-123) or GST alone on days 0, 14, 28. Mice were then intraperitoneally injected on day 42 with three ExPEC ST131 strains, JJ1886, JJ2050, or JJ2547 (5 × 107 CFU). These strains were chosen because they represent a diverse range of strains from the genetically distinct and epidemic clade—clade C2, or H30Rx—of the ST131 clonal group [81]. The vaccination schematic used in this experiment is shown in Fig 3A. The infection was allowed to progress for 24 hours before the mice were euthanized and their kidney, spleen, and liver collected. The organs were homogenized, and the ExPEC bacterial load in the infected organs was quantified by the determination of CFU (Fig 3B–3D). Combining the counts from all cohorts (as a way to assess the total effect of vaccination across all organs and strains), both SinH-based vaccines showed a clear and statistically significant reduction in bacterial burden (Adjusted P value, SinH-3, P<0.0001; SinH-123, P<0.0001). In comparison to the mice that received GST alone, SinH-3 vaccinated mice had a 55-fold decrease, and SinH-123 vaccinated mice had an 88-fold decrease in the median levels of total ExPEC (Fig 3B), thereby demonstrating the results were rigorous across multiple strains, multiple organs, and for at least two antigens of the target autotransporter. A reduction in bacterial levels was also observed in all three organs when each bacterial strain was parsed into separate data (Fig 3C) thereby suggesting the reduction was likely regardless of the genetic background of this sequence type. For example, these reductions were for SinH-3 37-fold (194.29, 37.18, and 88.68) and for SinH-123 at least a 54-fold reduction (111.48, 54.72, and 870.37) in the median level of each ExPEC strain. In addition, in combining the counts from all ExPEC strains, mice vaccinated with SinH-based antigens significantly reduced bacterial levels in each type of organ. For example, SinH-3 vaccinated mice had at least a 38-fold reduction (38.83, 85.96, and 96.67), and SinH-123 vaccinated mice had at least a 65-fold reduction (65.57, 80.33, and 100) in the median level of ExPEC for the liver, spleen and kidney compared to the GST-only control (Fig 3D), a result that was equivalent for both SinH antigens. PPT PowerPoint slide

PNG larger image

TIFF original image Download: Fig 3. Assessment of the protective efficacy and immunogenicity of SinH-based vaccines against ExPEC sequence type 131 (ST131) bacteremia. (A) The vaccination scheme was used in this experiment. BALB/cJ, 6 weeks old, female mice were subcutaneously immunized with SinH-based antigens (SinH-3, SinH-123, N = 15) or GST alone (N = 15) and injected with an intraperitoneal (IP) injection of 5 × 107 CFU of different ExPEC ST131 strains (JJ1886, JJ2547, JJ2050). Organs were harvested and plated to determine bacteria levels. Serum was taken from individual mice after immunization and ExPEC infection. The schematic diagram was made in BioRender. (B) Box-and-whisker plots of the bacterial levels (CFU/ml) in combining the counts from all organs (liver, spleen, kidney) and all ExPEC strains (JJ1886, JJ2547, JJ2050); (C) or the bacterial levels (CFU/ml) of each ExPEC ST131 strain in combining the counts from all organs; (D) or the bacterial levels (CFU/ml) of all ExPEC strains in each type of organ following necropsy. (E) ELISA analysis of sera from SinH-based antigens vaccinated animals using antigens, SinH-3 or SinH-123 (GST-tag removed), as the capture antigen. Error bars indicate the median with 95% confidence interval (CI). Significant was determined by theKruskal-Wallis analysis of variance (ANOVA) with Dunn’s multiple comparisons correction. Symbols represent data of individual mice. One star (*) P < 0.05, two stars (**) P < 0.01, three stars (***) P < 0.001, four stars (****) P < 0.0001. The Box-and-whisker plots were exported from Graphpad Prism 9 and annotated using BioRender. https://doi.org/10.1371/journal.ppat.1011082.g003 In addition, to determine whether subcutaneous immunization with SinH-based vaccines induces a vaccine-specific humoral immune response, serum samples were collected from each mouse on the day of euthanasia. The levels of vaccine antigen-specific serum IgG were quantified via indirect ELISA. Of note, SinH-123 induced statistically significant production of IgG specific for the immunogen over the GST control (Fig 3E, Adjusted P value, P<0.0001, P<0.0001). When SinH-3 (GST-tag removed) was used as the ELISA antigen, SinH-3 vaccinated mice showed higher antigen-specific serum IgG responses than the control group mice (Adjusted P value, P = 0.0319) (Fig 3E). Interestingly, vaccination with SinH-123 produced the most robust serum IgG response, perhaps due to the construct being composed of three domains, thereby providing more antibody-recognition sites than SinH-3. This result might explain the reason SinH-123 antigens demonstrated more stable protection against the colonization of ExPEC sequence type 131 in the murine model of bacteremia, which positively correlates to the protective efficacy of antigen.

Immunization with SinH-based antigens reduces the mortality of ExPEC ST131 bacteremia Next, we determined whether subcutaneous immunization with SinH decreased the mortality of the vaccinated mouse after being challenged by the ST131 E. coli. We used alum-only (30 μl/mouse) and LPS-only (3 EU/mouse) as the control group. LPS-only or alum-only was added in this experiment to control for the possibility that endotoxin or adjuvant might contribute to the overall protection observed in SinH vaccinated animals. Mice were vaccinated with SinH antigens (SinH-3 or SinH-123), alum, or LPS, followed by intraperitoneal injection on day 42 with ST131 JJ2050 E. coli strain (5 × 107 CFU). Mice were monitored twice a day for 10 days. Murine survival was followed with time, and moribund animals were euthanized/necropsied to determine bacterial levels in the kidneys, spleen, and liver. The organs were homogenized, and the JJ2050 bacterial load in the infected organs was quantified by the determination of CFU. The vaccination schematic used in this experiment is shown in Fig 4A. The results showed that mice vaccinated with an LPS-only or alum-only control died within 1 d.p.i. In contrast, animals immunized with either of the SinH antigens demonstrated a survival rate of 33.3% after 10-days (Adjusted P value, SinH-3, P = 0.0037; SinH-123, P = 0.0090) (Fig 4B). PPT PowerPoint slide

PNG larger image

TIFF original image Download: Fig 4. Assessment of the protective efficacy of SinH-based vaccines reduced the mortality of ExPEC sequence type 131 (ST131) bacteremia. (A) The vaccination scheme was used in this experiment. BALB/cJ, 6 weeks old, female mice were subcutaneously immunized with SinH-based antigens (SinH-3, SinH-123, N = 12), alum-only (N = 8) or LPS-only (N = 8) and injected with an intraperitoneal (IP) injection of 5 × 107 CFU of ExPEC ST131 strain JJ2050. Mice were monitored twice a day for 10 days, and moribund animals were euthanized/necropsied to determine bacterial levels in the kidneys, spleen, and liver. The schematic diagram was made in BioRender. (B) The survival rate of ST131 ExPEC strain JJ2050 was determined using the Gehan-Breslow-Wilcoxon comparison. (C) Box-and-whisker plots of the JJ2050 bacterial levels (CFU/ml) of the SinH-3 vaccinated group and SinH-123 vaccinated group in combining the counts from all organs (liver, spleen, kidney) at 2 d.p.i and 10 d.p.i. Error bars indicate the median with 95% confidence interval (CI). Significant was determined by the Kruskal-Wallis analysis of variance (ANOVA) with Dunn’s multiple comparisons correction. Symbols represent data of individual mice. One star (*) P < 0.05, two stars (**) P < 0.01, three stars (***) P < 0.001, four stars (****) P < 0.0001. The Box-and-whisker plots and Kaplan Meier survival curves were exported from Graphpad Prism 9 and annotated using BioRender. https://doi.org/10.1371/journal.ppat.1011082.g004 The bacterial levels in SinH vaccinated animals showed results consistent with the survival data. Combining the counts from all organs, compared to the mice vaccinated with LPS-only (moribund within 1 d.p.i), the mice vaccinated with SinH-3 significantly reduced the bacterial burden of JJ2050 in organs after 2 d.p.i (moribund within 2 d.p.i, Adjusted P value, P = 0.0248) and after 10 d.p.i (surviving mice, Adjusted P value, P<0.0001). Also, compared to the mice vaccinated with alum-only, the mice vaccinated with SinH-3 significantly reduced the bacterial burden of JJ2050 in organs after 10 d.p.i (surviving mice, Adjusted P value, P<0.0001). In comparison to the bacterial level of the mice that moribund within 1 d.p.i which received LPS-only or alum-only, those surviving SinH-3 vaccinated mice had a 4-log reduction or 3.8-log reduction in the median level of JJ2050 strain after 10 d.p.i (Fig 4C). Likewise, compared to the mice vaccinated with LPS-only or alum-only (moribund within 1 d.p.i), the SinH-123 vaccinated mice also had significantly reduced bacterial burdens in organs after 2 d.p.i (moribund within 2 d.p.i, Adjusted P value, P = 0.0023, P = 0.0281) and 10 d.p.i (surviving mice, Adjusted P value, P<0.0001, P<0.0001). In comparison to the bacterial level of the mice that moribund within 1 d.p.i which received LPS-only or alum-only, those surviving SinH-123 vaccinated mice had a 6.6-log reduction or 6.4-log reduction in the median level of JJ2050 strain after 10 d.p.i (Fig 4C).

Immunization with SinH-3 confers protection against the bacteremia of multiple ExPEC sequence types Although ST131 is now a pandemic clonal lineage of ExPEC, other clonal ExPEC lineages, such as ST95 and ST73 were the second and third most common clonal ExPEC group isolated from urine and blood from patients with bloodstream infections [71–73]. MegaBLAST and MAFFT were used to align the sinH sequence from the ST95 and ST73 sequence types. A total of 30 amino acid mutations were observed in the domain-3 of the SinH sequence (Fig 5A) compared to ST131, the most varied domain of the three. To determine if SinH-3 is effective against multiple ExPEC sequence types in the murine model of bacteremia, mice were vaccinated with this domain as described in Fig 3, followed by intraperitoneal injection on day 42 with a mixture of strains of ST73 (CFT073) and ST73-like (W0040, W0088, W0116) equally or a mixture of strains of ST95 (UTI89) and ST95-like (W0060) equally (ST73-mixture or ST95-mixture, each measure total at 5 × 107 CFU—Fig 5B). On day 48, mice were euthanized, their liver, spleen, and kidney organs were collected and homogenized. The ExPEC bacterial load in the infected organs was quantified by the determination of CFU. Of the mice immunized with the SinH-3, at least 75% (Adjusted P value, ST73-mixture, P = 0.0221) and 86% (Adjusted P value, ST95-mixture, P = 0.0024) of the subjects survived the 5-day challenge period (Fig 5C and 5D), a number highly favorable compared to all the subjects failing to survive in the control cohort (0% survival). In addition, combining the counts from all organs, mice vaccinated with SinH-3 significantly reduced bacterial burden in organs of both ExPEC ST73-mixture and ST95-mixture (Adjusted P value, ST73, P = 0.0085; ST95, P = 0.0005) (Fig 5E). In comparison to the unvaccinated mice, SinH-3 vaccinated mice had an approximate 4-log reduction of ExPEC ST73-mixture strains and an approximate 4.3-log reduction of ExPEC ST95-mixture strains in the median level of ExPEC colonization (Fig 5E). PPT PowerPoint slide

PNG larger image

TIFF original image Download: Fig 5. Assessment of the protective efficacy of SinH-3 against the bacteremia of multiple ExPEC sequence types (STs). (A) Sequence alignment of sinH in different sequence types of ExPEC. The alignment was exported from Geneious and annotated using BioRender. (B) The vaccination scheme was used in this experiment. BALB/cJ, 6 weeks old, unvaccinated female mice (N = 4) and female mice were subcutaneously immunized with SinH-3 (N = 8), were both injected with an intraperitoneal (IP) injection of 5 × 107 CFU of multiple ExPEC sequence type strains (ST73-mixture, ST95-mixture). Mice were monitored twice a day for 5 days, and moribund animals were euthanized/necropsied to determine bacterial levels in the kidneys, spleen, and liver. Organs were harvested and plated to determine bacteria levels. The schematic diagram was made in BioRender. The survival rate curve of (C) ST73-mixture or (D) ST95-mixture was determined using the Gehan-Breslow-Wilcoxon comparison. (E) Box-and-whisker plots of the bacterial levels (CFU/ml) of the counts from all organs following necropsy. Error bars indicate the median with 95% confidence interval (CI). Significant was determined by the Kruskal-Wallis analysis of variance (ANOVA) with Dunn’s multiple comparisons correction. Symbols represent data of individual mice. One star (*) P < 0.05, two stars (**) P < 0.01, three stars (***) P < 0.001, four stars (****) P < 0.0001. The Box-and-whisker plots and Kaplan Meier survival curves were exported from Graphpad Prism 9 and annotated using BioRender. https://doi.org/10.1371/journal.ppat.1011082.g005

Immunization with SinH-3 confers protection against cystitis in the murine model of acute UTI Urinary tract infections (UTIs) are one of the most common diseases globally [82]. To examine the protective efficacy of SinH-based antigens against ExPEC in the murine model of acute UTI, female BALB/cJ mice were immunized subcutaneously on days 0, 14, and 28 as described in the previous model. Mice were transurethrally inoculated on day 42 with 108 CFU of UPEC strains (UTI89 or CFT073, Fig 6A). After 24 hours, bladders were homogenized, and the UPEC bacterial load in the infected organs was quantified (Fig 6B and 6C). SinH-3 vaccination significantly protected the mice against UTI89 colonization. SinH-3 vaccinated mice had a 44-fold reduction in the median levels of UTI89 colonization in the bladder in comparison to the mice that were given GST alone (Adjusted P value, P = 0.0430), Fig 6B). Although an approximately 20-fold reduction in the median levels of UTI89 colonization in the bladder compared to the control group was observed for the three-domain antigen SinH-123, the effect was not statistically significant (Adjusted P value, P = 0.2843, Fig 6B). For the experimental UPEC strain CFT073, there was no difference between the experimental groups and the control group (Fig 6C). To evaluate the humoral immune response at the site of UPEC colonization, urine samples were collected from individual mice following a series of subcutaneous immunization with either SinH-based antigens or GST, and the levels of vaccine-specific urinary IgG and IgA were quantified via indirect ELISA. For the urinary IgG, SinH-3 vaccinated mice induced significantly higher levels of antigen-specific urinary IgG than those in the control group (Adjusted P value, P<0.0001; P = 0.0001). In addition, SinH-3 vaccinated mice demonstrated a higher level of urinary IgG than SinH-123 vaccinated mice, which might explain the reason that SinH-3 showed better protection against the colonization of UPEC in the murine model of acute UTI (Fig 6D). For the urinary IgA, the total ELISA signal is lower than the urinary IgG, and SinH-123 vaccinated mice induced a statistically higher level of antigen-specific urinary IgA response than those in the control group when SinH-123 (GST-tag removed) was used as the ELISA antigen (Adjusted P value, P = 0.0258). When SinH-3 (GST-tag removed) was used as the ELISA antigen, SinH-3 vaccinated mice showed higher antigen-specific urinary IgA responses than the control group mice (Adjusted P value, P = 0.0024) (Fig 6E). PPT PowerPoint slide

PNG larger image

TIFF original image Download: Fig 6. Assessment of the protective efficacy and immunogenicity of SinH-based vaccines against acute urinary tract infection (UTI). (A) The vaccination scheme was used in this experiment. BALB/cJ, 6 weeks old, female mice were subcutaneously immunized with SinH-based antigens (SinH-3, SinH-123, N = 8) or GST alone (N = 7 or 8) and inoculated with a transurethral injection of 108 CFU of UPEC strains (UTI89, CFT073). Bladders were harvested and plated to determine bacteria levels. Urine was taken from each mouse after complete immunization. The schematic diagram was made in BioRender. Box-and-whisker plots of the bacterial levels (CFU/ml) in the bladder of UTI89 (B) or CFT073 (C) ELISA analysis of urinary IgG (D) and IgA (E) from SinH-based antigens vaccinated animals using antigens, SinH-3 or SinH-123, as the capture antigen. Error bars indicate the median with 95% confidence interval (CI). Significant was determined by the Kruskal-Wallis analysis of variance (ANOVA) with Dunn’s multiple comparisons correction. Symbols represent data of individual mice. One star (*) P < 0.05, two stars (**) P < 0.01, three stars (***) P < 0.001, four stars (****) P < 0.0001. The Box-and-whisker plots were exported from Graphpad Prism 9 and annotated using BioRender. https://doi.org/10.1371/journal.ppat.1011082.g006

SinH-based vaccination led to a minimal reduction in ExPEC colonization in healthy mice that was not statistically significant The gastrointestinal tract is the major reservoir of ExPEC [83]. In addition, a recent study showed up to 93.5% of traditionally classified InPEC fecal isolates additionally carried ExPEC virulence factors, which might cause the infection outside of the GI tract [84]. Hence, the reduction of the colonization of ExPEC or E. coli strains carrying ExPEC-associated virulence factors in this environment is expected to decrease the risk of extraintestinal infections throughout life. To test the hypothesis that SinH will reduce ExPEC colonization, mice were vaccinated as before and gavaged on day 42 with 109 CFU of ExPEC ST131 strains JJ1886, JJ2547, JJ2050 (Fig 7A). Feces were homogenized, and the ExPEC bacterial load in the feces was quantified (Fig 7B and 7C). Although the reduction of bacterial loads was observed in the SinH-3 vaccinated group, the effect was not statistically significant (Adjusted P value, P = 0.0797) (Fig 7B). For the SinH-123 vaccinated group, there was no difference between the control group and the experimental group. In addition, SinH-3 vaccinated mice showed a better protective efficacy against ExPEC strains JJ2547 and JJ2050 colonization than the SinH-123 in the GI tract; however, the results were not statistically significant (Fig 7C). PPT PowerPoint slide

PNG larger image

TIFF original image Download: Fig 7. Assessment of the protective efficacy of SinH-based vaccines against ExPEC colonization in the GI tract. (A) The vaccination scheme was used in the murine model of gastrointestinal (GI) tract colonization. BALB/c, 6 weeks old, female mice were subcutaneously immunized with SinH-based antigens (SinH-3, SinH-123, N = 18) or GST alone (N = 18) and inoculated with a gavage of 109 CFU of ExPEC ST131 strains (JJ1886, JJ2547, JJ2050). Feces samples were collected and plated to determine bacteria levels. (B) Box-and-whisker plots of the bacterial levels (CFU/ml) in combining the counts from all ExPEC strains (JJ1886, JJ2547, JJ2050) (C) or the bacterial levels (CFU/ml) of each ExPEC strain in feces. (D) The vaccination scheme was used in the murine model of gastrointestinal (GI) tract colonization in immunosuppressed mice. BALB/c, 6 weeks old, female mice were subcutaneously immunized with SinH-based antigens (SinH-3, SinH-123, N = 18) or GST alone (N = 18) and inoculated with a gavage of 109 CFU of ExPEC ST131 strains (JJ1886, JJ2547, JJ2050). And then, mice were treated with the chemotherapeutic agent Cytoxan (CTX) on alternate days. After three times injections, feces were harvested and plated to determine bacteria levels in immunosuppressed mice. (E) Box-and-whisker plots of the bacterial levels (CFU/ml) in combining the counts from all ExPEC strains (JJ1886, JJ2547, JJ2050) (F) or the bacterial levels (CFU/ml) of each ExPEC strain in immunosuppressed mice feces. Error bars indicate the median with 95% confidence interval (CI). Significant was determined by the Kruskal-Wallis analysis of variance (ANOVA) with Dunn’s multiple comparisons correction. Symbols represent data of individual mice. One star (*) P < 0.05, two stars (**) P < 0.01, three stars (***) P < 0.001, four stars (****) P < 0.0001. The schematic diagrams were made in BioRender. The Box-and-whisker plots were exported from Graphpad Prism 9 and annotated using BioRender. https://doi.org/10.1371/journal.ppat.1011082.g007

[END]
---
[1] Url: https://journals.plos.org/plospathogens/article?id=10.1371/journal.ppat.1011082

Published and (C) by PLOS One
Content appears here under this condition or license: Creative Commons - Attribution BY 4.0.

via Magical.Fish Gopher News Feeds:
gopher://magical.fish/1/feeds/news/plosone/

You are viewing proxied material from magical.fish. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.