Greetings...
This is the second edition of the KNOWN MODEM INIT STRINGS FOR DOOM (KNISFD).
I am proud to say that it has increased in size. However, I cannot promise
it has increased in accuracy. It seems that some modems and connections
vary differently even between the same modem! So, if you see a string on
here that you can't get to work, it doesn't mean it doesn't work....
Understand?
If you see a typo, please report it.
BEG BEG BEG:
Please, if your modem is not on this list, and you have it working,
email:
[email protected]
with the type of modem, init string, and hangup string if different.
Thanks goes to all the posters who I stole this stuff from.
I do not know if these settings work... I am just trying to be nice,
so don't flame me if your modem still doesn't work.
If you have any suggestions or other additions you would like to see
included in the MODEM DOOM FAQ, please send you suggestions to the
above address. Eventually, I will get around to either sending them
to Hank or compiling them with this or another DOOM document.
------------------------KNOWN MODEM INIT STRINGS v2.0---------------------
For DOOM v1.2
February 28, 1993
Compiled by Barry Bloom & Jeff Lewis
[email protected] (Current Maintainer)
[email protected] (Retired :))
Special thanks to all those who contributed
and Hank "FAQ-MAN" Leukart.
CUT HERE------------------------------------------------------------------
Settings known to work:
-------------------------------------
AT&T DataPort 14.4 modem
AT %B9600 S41=3 \C0 &D2 \G0 \Q0 \X1 \D0 \N0 %C0
-------------------------------------
Boca 14.4
AT Z S46=136 S37=9 %C0 N0
Boca M1440
S0 =1 = answer on first ring
N0 =force speed to value in S37
F8 =v.32 or v.32bis 9600 (sets S37)
&K0=disable flow control
%C0=no compression (no v.42bis, no MNP5)
\N0=NORMAL (speed buffer) mode; should this be DIRECT(pass thru)?
\J0=disable DTE auto rate adjustment
which equates to: AT S0=1 N0 F8 &K0 %C0 \N0 \J0
Boca M1440i (internal)
ATS48=0S37=9S46=136%C0%E0%M0&K0&Q0&R1&C1&D2\G0\N1N0
Boca 14.4k (internal)
AT&C0N0S37=9&K0W0&Q0S36=3S48=128%C0
Boca 14.4 Fax/Modem
AT S46=0 S37=9 N0 &Q0 &D2 &K4
Boca 14.4k (external)
AT &F S0=1 S36=0 &K0 &Q6N0S37=9 &D2
Boca 14.4k
AT S46=0 S37=9 N0 &Q0 &D2 &K0 %C0
On the Boca.. (calling modem)
INIT string is....
AT &F &K0 S37=9 N0 &D0 &Q0 \G0 \N0
-------------------------------------
Cardinal 14.4k/14.4k fax v.42 bis,
AT &F W0 &Q0 &D2
Cardinal 14,400 internal.
&K3 n0 w0 s95=0 &q0 s37=9 s46=136 s48=128 s36=1
Cardinal 14.4 V.32bis
AT &F N0 S37=9 &Q0 &D2 \N1
-------------------------------------
Digicom Systems (DSI) Connection 96+ (softmodem)..
AT Z \N0 &D2 &K0 S48=48
Digicom Systems Scout Plus
ATZ*E0*N3*M0*S0*F0&D2
AT Z H0
-------------------------------------
Telepath 14.4k(Gateway2000)
AT &F&M0&K0&N6&H0 S0=1
Gateway Telepath
AT &F S37=9 %C0 &K0 &Q6 \G0
Gateway Telepath 14.4.
AT S46=0 S37=9 N0 &Q0 &D2 &K0 %C0
-------------------------------------
GENERIC v32bis (14400 FAX/DATA)
AT \N0 %C0 B8
AT Z H0
-------------------------------------
Hayes 28.8 V.FAST modem
AT &Q6 &K S37=9 N %C0 \N0
AT H0
-------------------------------------
Infotel
AT&q0 s37=9n0 s36=3 s48=128 %c0 &d2
Infotel 144I:
AT&Q0 S37=9 N0 &D2
Infotel ????
AT &F S37=0 N0 W2 &C1 &D2 &K0 &Q6 \N0 %C0 %M0
AT Z H0
-------------------------------------
Intel 14.4 internal, and the
AT Z B8 Q1 \C0 \N1 %C0 \V "H
Intel satisFAXtion 400e
AT /n0 /q0 %c0
Intel 144/144i
AT \N0 %C0 \Q0 B8
Intel 14.4 (modem/fax)
AT \N0 %C0 \Q0 B8
Intel 96/14.4 EX series
AT \N0 %C0 \Q0 -J0 or AT Z0 -J0 \N0
-------------------------------------
Microcom QX/4232bis
AT %C0 \N0
-------------------------------------
Netcomm M7F
AT &e &k0 b0 \v0 x4 &d2 \n1 \q0 #j0 #q9 %c0
-------------------------------------
NOKIA ECM 4896M TRELLIS V.32.
AT Z %C0 /N0
-------------------------------------
Practical Peripherals 14400FX V.32bis
AT Z S46=0 &Q0 &D2
AT Z H0
Practical Peripherals PM14400FXMT?
AT Z S46=0 &Q0 &D2
or AT S46=0 &Q0 &K0 &D2
-------------------------------------
Supra
AT &F0 S46=136 %C0
AT Z H0
Supra (external)
AT &K &Q &D \N1
Supra FaxModem 14.4K.
AT N0 %C S37=9 S46=136 &Q0 &D2 &K
AT H0
SupraFaxModem v.32bis
AT%C0&K0&Q6&D2\N0
Supra 14.4 V.32bis
AT &f S46=136 &Q0 &D2
OR AT &K &Q &D \N1
-------------------------------------
USR DS v.32bis v.42bis (external)
AT&m0&n6&a0&r1&h0&k0&i0&s0&b1x1
USR Sporster 9600
AT&M0&K0&N6
USR Courier v.32bis
ATS0=1 S7=60 E1 Q0 V1 &C1 &D2 &H0 &K0 &M0 &N6 &A3
USR Courier HST/DS 16.8k
In your favorite terminal program, type "AT &F" BEFORE running
DOOM. Then, put the following initialization string in the MODEM.CFG.
Putting "AT &F" in the string does not work.
AT X4 B0 &A0 &B0 &H2 &I0 &K0 &M0 &N6a
AT H0
USR Sportster 14.4k Fax/Modem
AT S0=1 S7=60 E1 QO V1 &C1 &D2 &K0 &N6 &A3
Note that this LEAVES ERROR CORRECTION ON! This may slow down the game,
and your mileage may vary.
USR 14.4k
AT &F&A0&K0&M0
USR 14.4k
AT &K0 &H0 &D0 &I0 &R1
USR Sportster 14.4k Fax/Modem (internal)
AT &F&M0&K0&N6&H0
USR Sportster 14.4k
ATS0=1S7=60E1Q0V1&C1&D2&K0&N6&A3
USRobotics 14.4-Internal 1/2 Card
AT &N6 &B0 &M0 &K0 &H0 &I0 &R1 &A0 S27=32
(NOTE: &R1 is critical)
AT&M0&N6&K0&H0 Has also worked for the sportster
or AT&F&A0&M0&K0
or AT &f &ho & b0 &m0 &d2 &a0 & k0 &n6
US Robotics 16.8 Dual Standard
i think you need a fossil driver and you might also have to lock it
at 19200... i got x00.sys and put it in my config.sys using
device=c:\x00.sys E 1 B,0,19200 R=1024 T=2048
after i intstall the modem responded fine... i don't know if this necessary
but it worked for me
or AT &a0&m0&k0&n6b0s0=0X7
-------------------------------------
Viva 9642i 9600 (internal)
AT&F2V1%C0\G0\N0\Q0\V0
ViVa 14.4
AT&F&Q6\N0%C0&D2N0S37=9
-------------------------------------
Wang 14/14 with DOOM.
ats46=0s37=9n0&k0%c0%m0&q0&d2\n1
-------------------------------------
ZOOM 14.4 V32bis FaxModem
AT&q6s37=0\n0
ZOOM OEM Modem
AT&Q6S37=9N0&K0
Zoom 14.4 VFX
AT&Q6S37=9N0%C0\N0
ATH0
Zoom 14.4k VFX (at 14.4k: your mileage may vary)
AT&Q6S37=11N0%C&K0
Zoom Telephonics V.Fast 28.8
AT &Q0 N0 S37=9 %C0 &K3 S36=1 S46=136 S48=128
Zoom 14.4 VFX
AT&K0&Q6S37=9N0%C\N0
Due to the fact that DOOM does not raise CTS for hardware flow control, we
had to add &K0 to the modem init string for the ZOOM modem. Otherwise, your
modem string for Zoom was fine.
-------------------------------------
Zyxel U-1496E+
AT Z &N4 &K0
AT Z H0
-------------------------------------
