Commercial Mail Relay (CMR)
_A_d_d_r_e_s_s:
Commercial Mail Relay
c/o Chloe Holg
USC/Information Sciences Institute
4676 Admiralty Way
Marina del Rey, CA 90292
_E-_m_a_i_l:
[email protected]
_P_h_o_n_e: (213) 822-1511
_D_e_s_c_r_i_p_t_i_o_n
The Commercial Mail Relay service currently provides mail
relay functions between the Internet and three commercial
electronic mail systems: Telemail, MCI-Mail, and DIALCOM
systems (IEEE-Compmail, NSFMAIL, and USDA-MAIL).
To send mail via the Commercial Mail Relay users on each
system use their normal mail programs to prepare, send, and
receive messages. Messages to be forwarded are sent to the
CMR mailbox called ``Intermail'' on the local mail system.
The CMR operates by having a program service mailboxes in
both the local and the destination mail systems. When the
right information is supplied either in the ARPA-Mail header
``TO'' field, at the beginning of the text of a message, the
program forwards those messages into the other mail system.
The Simple Forwarding Header (SFH) method of addressing mail
for each system follows. First send a message to
``
[email protected]'', and use one of the SFHs in the body
of the text.
a. Forward: TELEMAIL
To: [user/org]system/country
<blank line>
Begin text of message here.
_________________________
The information in this section is provided in accor-
dance with the copyright notice appearing at the front
of this guide.
September 25, 1989 NNSC Section 5.20, Page 1
b. Forward: COMPMAIL
TO: CMP0123
<blank line>
Begin text of message here.
c. Forward:NSFMAIL
TO: NSF0123
<blank line>
Begin text of message here.
d. Forward: USDAMAIL
TO: AGS786
<blank line>
Begin text of message here.
e. Forward: MCIMAIL
TO: 198-7654
<blank line>
Begin text of message here.
For Telemail, and the Dialcom systems, we have added a
feature, of simply typing the Commercial Mail mailbox in the
ARPA-Internet header.
TO:[user/organization]system/country%
[email protected]
TO: CMP765%
[email protected]
TO: NSF765%
[email protected]
TO: AGS765%
[email protected]
In order for a message to be delivered from one of the com-
mercial mail systems to a mailbox in the ARPA-Internet Mail
system, you must first send mail to the CMR mailbox of that
system, then add the Internet forwarding information at the
beginning of the text of each message.
The CMR mailbox address in each system is:
September 25, 1989 NNSC Section 5.20, Page 2
Telemail: [Intermail/USCISI]TELEMAIL/USA
MCI-Mail: Intermail or 107-8239
CompMail: Intermail or CMP0817
NSF-Mail: Intermail or NSF153
USDA-Mail: Intermail or AGS9999
For example, to send a message from Telemail to an ARPA-
mailbox this format is used.
To: [INTERMAIL/USCISI]TELEMAIL/USA
Subject: Test Message Number 1
Forward: ARPA
To:
[email protected]
For detailed instructions on how to use the Commercial Mail
Relay (CMR) send a message to ``intermail-
[email protected]''.
_N_e_t_w_o_r_k _A_c_c_e_s_s
CMR is a UNIX based system, using the MMDF mail software.
Any IP/TCP organization may access CMR. See restrictions
below.
_W_h_o _C_a_n _U_s_e _t_h_e _C_M_R _G_a_t_e_w_a_y
The requirement for using CMR is that the work conducted
must be DARPA sponsored research or other US government
approved business (or otherwise meet the acceptable use pol-
icy of DARPA,) only.
However, DARPA as a member of the Federal Research Internet
Coordinating Committee (FRICC) has agreed to the (draft)
policy for communication networks that provides (in part)
that: ``the member agencies of the FRICC agree to carry all
traffic that meets the acceptable use policy of the ori-
ginating member agency.''
Thus, e-mail messages (i.e., ``traffic'') that meet the
acceptable use policy of an agency and pass through some
facility of that agency (i.e., ``the originating member'')
on the way to Intermail or CMR are allowed. The current
member agencies of the FRICC are DARPA, NSF, DOE, NASA, AND
NIH.
In the least restrictive case, all bona fide researchers and
September 25, 1989 NNSC Section 5.20, Page 3
scholars, public and private, from the United States and
foreign countries (unless denied access by national policy)
are allowed access.
BITNET and UUCP (and other) networks are interconnected to
the Internet via mail relays. It is the responsibility of
the managers of these mail relays to ensure that the e-mail
messages (``traffic'') that enters the Internet via their
mail relays meets the acceptable use policy of the member
agency providing the internet access.
_M_i_s_c_e_l_l_a_n_e_o_u_s _I_n_f_o_r_m_a_t_i_o_n
Problems: call Chloe Holg (213) 822-1511 or e-mail to
[email protected].
September 25, 1989 NNSC Section 5.20, Page 4