A GENERIC MENU FOR THE "GENERIC KEYS-R-US" TYPE CHIP ( for 010X units )
=======================================================================
A. I SUGGEST THAT YOU TUNE TO AN "FA" VIDEOCYPHER TRANSPONDER FOR THE
FOLLOWING ....JUST A SAFETY PRECAUTION FROM THE DATA STREAM.
B. ENSURE THE UNIT POWER IS OFF WHEN EXCHANGING CHIPS AND EXCHANGING THE
MODULE.
C. PLACE THE "GKEYSRUS" CHIP IN U-30, AND POWER BACK UP.
................................ ARCHIVE......................................
READ SEED KEYS:
- SETUP, 1 ( COPY DOWN THE UNIT ID# )
- SETUP, 4, PASSWORD, ENTER ( SCREEN WILL FLASH )
- SETUP, 2, ( COPY DOWN THE SEED KEYS )
- SETUP, SETUP ( RETURNS TO MAIN MENU )
READ MONTHLY KEYS:
- SETUP, 9, 1 ( REPAIR MENU, VIEW U20 )
- 6100 --> ( COPY DOWN 1st 4 LINES )
- SETUP, 9, 1 ( GOING FOR SECOND SET )
- 6160 --> ( COPY DOWN 1ST 4 LINES )
READ LOCATION CODE ( OPTIONAL ):
- SETUP, 9, 1
- 61C0 --> ( COPY LAST LINE )
READ "PARENTAL LOCKOUT" PASSWORD CODE ( OPTIONAL ):
- SETUP, 9, 1
- 6260 --> ( COPY 2nd LINE )
.................................REPROGRAM...................................
1. - SETUP, 9, 3, PASSWORD, --> ( TO CHANGE BOX ID# )
2. - XXXXXXXX, --> ( 1st 8 CHAR OF THE UNIT# )
3. - SETUP, 9, 4, PASSWORD, --> ( TO CHANGE BOX KEYS )
4. - 00 XX XX XX XX XX XX XX, --> ( ENTER THE SEED KEYS & DON'T
FORGET - THE KEY# FIRST )
5. - ( REPEAT STEP 3 & 4 FOR KEY "01" )
6. - ( REPEAT STEP 3 & 4 FOR KEY "02" )
7. - ( REPEAT STEP 3 & 4 FOR KEY "03" )
8. - UNPLUG THE UNIT FOR A FEW SECONDS ( TO RESET THE BOX )
9. - POWER BACK UP, SETUP, 1 ( TO VERIFY UNIT# IS OK, AND
THE 9th & 10 DIGITS ARE "FF")
10.- SETUP, 9, 2, PASSWORD, --> ( TO CHANGE MONTHLY KEYS )
11.- 6100 -->
12.- XXXX, -->, XXXX, -->, ...ETC ( ENTER THE DATA FROM THE 4
LINES YOU RECORDED EARLIER )
13.- SETUP, 9, 2, PASSWORD, --> ( TO CHANGE THE OTHER MO. KEYS )
14.- 6160 -->
15.- XXXX, -->, XXXX, -->, ...ETC ( ENTER THE DATA FROM THE 4
LINES YOU RECORDED EARLIER )
16.- SETUP, 9, 2, PASSWORD, --> ( TO CHANGE SERVICE ID )
17.- 6247 -->, C4 -->
18.- SETUP, 9, 2, PASSWORD, -->
19.- 6223 -->, D0 -->
...... THE FOLLOWING STEPS ARE OPTIONAL .....
20.- SETUP, 9, 2, PASSWORD, --> ( TO CHANGE LOCATION CODE )
21.- 61F8 -->
22.- XX, -->, XX, -->, ...ETC ( ENTER THE LOC CODE DATA )
23.- SETUP, 9, 2, PASSWORD, --> ( TO WRITE PARENTAL PSWD )
24.- 6268 -->
25.- XX, -->, XX, -->, ...ETC ( ENTER THE LOC CODE DATA )
26.- SETUP ( FINISHED AT LAST !!! )
..............................................................................
CHEAT NOTES:
- DON'T FORGET THAT TO ENTER A-F, USE THE --> TO CHANGE 1-6 KEYS TO A-F KEYS.
- TO CORRECT A BAD ENTRY, USE THE <-- .
- IF DIGIT 9 & 10 OF THE ID# ARE NOT "FF", THEN RESTART FROM STEP #3.
