Sorry for the 40 columns but thats the
best I can do.
---------------------------------------
Incase one of these days you get lucky
and get a Telco Card Key, heres how you
can use it -> :
HOW TO USE 'YOUR' COMMAND CARD KEY
::::::::::::::::::::::::::::::::::
An ENTER and EXIT sensor is installed at
the from entrance door.
A personal "Command Key" has been given
to you which is recognized as a valid
entry/exit to the building.
Each card is programmer for a specific
tour and/or time schedule.Thirty minutes
on either side of the scheduled time
allows for early entry or delayed
departure.
Your key card must be used when entering
and exiting building.
- If not used when exiting the building
, it will not unlock the next time it
is used to gain entrance and
vice-versa.
Present your card key to within 2 or 3
inches of the ENTER/EXIT sensor. It is
not necessary to rub care key on the
door glass.
If the card key is authorized for that
door for that time, within several
seconds, you will hear the electric
strike unlock.
Access/Egress by significant numbers of
personnel at the same time: For eg:
(This is just for info purposes) several
employees going to lunch. This procedure
will only be in effect at specific
buildings with large number of employees
(for example Switching Control Centers).
- Local management will have to modify
system for specific times.
- First employees presents card which
opens door.
- Following employees will also present
thier card key to the ENTER/EXIT
sensor in order to be acknowledged by
the system program.
- A red indicator light installed in the
ENTER/EXIT sensor enclosure will flash
on to acknowledge your card key code
has been recognized.
