ic32at.15
9. But, the further you get from the ham band, the more unstable the rig is.
If there's a U where the memory channel should be, you've lost phase lock.
10. Install a diode at 5 if you want to make your rig a crossband repeater.
11. Do a CPU reset by holding both FUNCTION and [A] then turning on power.
12. For crossband repeater operation, enter a simplex frequency in the VHF
VFO and then enter a simplex frequency in the UHF VFO. Hold FUNCTION and
consecutively press [C] [6] [D].
13. To stop crossband repeater operation, you must be in receive mode (i.e.,
nobody transmitting). Hold FUNCTION and consecutively press [D] [C].
DIODE LOCATIONS & FUNCTIONS:
(At the LEFT of the back of the speaker, counting from top down)
(Original diode locations marked with *)
1. Install for 10 MHZ digit keypad entry
* 2. Leave in place for expanded VHF receive
3. ?
* 4. Remove for expanded UHF receive
5. Install for crossband repeater operation
Downloaded From P-80 International Information Systems 304-744-2253
