IC32AT.13
Icom Service Bulletin #13889-005
The IC-32AT has the capability of being used as a cross-band repeater.
This function is not enabled as the unit is shipped from the factory.
To enable this function perform the following steps:
1- Cut D912 on LOGIC UNIT. (see above figure)
2- Push and hold the (FUNCTION) switch.
3- Push the (C) key.
4- Push the (6) key.
5- Push the (D) key.
6- Release the (FUNCTION) switch.
To cancel "MINI REPEATER" perform the following steps:
1- Push and hold the (FUNCTION) switch.
2- Push the (D) key.
3- Push the (C) key.
4- Release the (FUNCTION) switch.
Downloaded From P-80 International Information Systems 304-744-2253