Network Working Group                                         E. Stephan
Request for Comments: 3919                            France Telecom R&D
Category: Informational                                         J. Palet
                                                            Consulintel
                                                           October 2004


  Remote Network Monitoring (RMON) Protocol Identifiers for IPv6 and
                Multi Protocol Label Switching (MPLS)

Status of this Memo

  This memo provides information for the Internet community.  It does
  not specify an Internet standard of any kind.  Distribution of this
  memo is unlimited.

Copyright Notice

  Copyright (C) The Internet Society (2004).

Abstract

  This memo defines additional (to those in RFC 2896) protocol
  identifier examples for IP version 6 and MPLS protocols.  These can
  be used to produce valid protocolDirTable INDEX encodings, as defined
  by the Remote Network Monitoring MIB (Management Information Base)
  Version 2 [RFC2021] and the RMON Protocol Identifier Reference
  [RFC2895].

  This document contains additional (to those in RFC 2896) protocol
  identifier macros for well-known protocols.  A conformant
  implementation of the RMON-2 MIB [RFC2021] can be accomplished
  without the use of these protocol identifiers, and accordingly, this
  document does not specify any IETF standard.  It is published to
  encourage better interoperability between RMON-2 agent
  implementations, by providing RMON related IPv6 and MPLS protocol
  information.

Table of Contents

  1.  The Internet-Standard Management Framework . . . . . . . . . .  2
  2.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
  3.  Relationship to the Remote Network Monitoring MIB. . . . . . .  2
  4.  MPLS layer protocol identifiers  . . . . . . . . . . . . . . .  2
  5.  IPv6 Protocols . . . . . . . . . . . . . . . . . . . . . . . .  3
  6.  Security Considerations  . . . . . . . . . . . . . . . . . . .  5
  7.  Acknowledgments  . . . . . . . . . . . . . . . . . . . . . . .  5
  8.  References . . . . . . . . . . . . . . . . . . . . . . . . . .  6



Stephan & Palet              Informational                      [Page 1]

RFC 3919      RMON Protocol Identifiers for IPv6 and MPLS   October 2004


      8.1.  Normative References . . . . . . . . . . . . . . . . . .  6
      8.2.  Informative References . . . . . . . . . . . . . . . . .  6
      Authors' Addresses  . . . . . . . . . . . . . . . . . . . . .   7
      Full Copyright Statement. . . . . . . . . . . .. . . . . . . .  8

1.  The Internet-Standard Management Framework

  For a detailed overview of the documents that describe the current
  Internet-Standard Management Framework, please refer to section 7 of
  RFC 3410 [RFC3410].  Managed objects are accessed via a virtual
  information store, termed the Management Information Base or MIB. MIB
  objects are generally accessed through the Simple Network Management
  Protocol (SNMP).  Objects in the MIB are defined using the mechanisms
  defined in the Structure of Management Information (SMI). This memo
  specifies a MIB module that is compliant to the SMIv2, which is
  described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579]
  and STD 58, RFC 2580 [RFC2580].

2.  Overview

  This memo defines basic protocol identifiers for IP version 6 and
  MPLS protocols.

  The "Remote Network Monitoring MIB Protocol Identifier Macros"
  [RFC2896], defines various protocol identifiers.  The syntax of the
  protocol identifier descriptor is defined in the RMON Protocol
  Identifier Reference [RFC2895].  The reader should be familiar with
  these documents.

  The intent of this document is not to adapt each protocol identifier
  defined in the RFC 2895 and in the RFC 2896 to IP version 6, but to
  define protocol identifiers for IP version 6 protocols and for MPLS
  protocol.

3.  Relationship to the Remote Network Monitoring MIB

  RMON MIB implementations use protocol identifiers to describe
  unambiguous capabilities in protocolDirTable entries.

4.  MPLS layer protocol identifiers

  This section defines protocol identifiers for MPLS with unambiguous
  names to distinguish MPLS Unicast from MPLS Multicast.








Stephan & Palet              Informational                      [Page 2]

RFC 3919      RMON Protocol Identifiers for IPv6 and MPLS   October 2004


-- MPLS unicast

mplsu PROTOCOL-IDENTIFIER
  PARAMETERS { }
  ATTRIBUTES { }
  DESCRIPTION
               "MPLS Label Stack Encoding."

  CHILDREN
               "Children of MPLS are not systematically identifiable. "
  REFERENCE
               "RFC 3032, MPLS Label Stack Encoding [RFC3032]."
  ::= {
               ether2  0x8847, -- RFC 3032 section 5
               snap    0x8847,
               802-1Q  0x8847,
               ppp     0x0281, -- RFC 3032 section 4.3
  }

-- MPLS multicast

mplsm PROTOCOL-IDENTIFIER
  PARAMETERS { }
  ATTRIBUTES { }
  DESCRIPTION
               "MPLS Label Stack Encoding."
  CHILDREN
               "Children of MPLS are not systematically identifiable."
  REFERENCE
               "RFC 3032, MPLS Label Stack Encoding [RFC3032]."
  ::= {
               ether2  0x8848, -- RFC 3032 section 5
               snap    0x8848,
               802-1Q  0x8848,
               ppp     0x0283, -- RFC 3032 section 4.3
  }

5.  IPv6 Protocols

ip6 PROTOCOL-IDENTIFIER
PARAMETERS {}
ATTRIBUTES {}
DESCRIPTION
       "The protocol identifiers for the Internet Protocol, Version 6
       [RFC2460]."






Stephan & Palet              Informational                      [Page 3]

RFC 3919      RMON Protocol Identifiers for IPv6 and MPLS   October 2004


CHILDREN
       "Children of 'ip6' are selected by the value in the Protocol
       field (one octet), as defined in the PROTOCOL NUMBERS table
       within the Assigned Numbers Document.

       The value of the Protocol field is encoded in an octet string as
       [ 0.0.0.a ], where 'a' is the protocol field.
       Children of 'ip6' are encoded as [ 0.0.0.a ], and named as 'ip6
       a' where 'a' is the protocol field value.  For example, a
       protocolDirID-fragment value of:
         0.0.0.1.0.0.0.41.0.0.0.58

       defines an encapsulation of IPv6-ICMP (ether2.ip6.icmp6)"
ADDRESS-FORMAT
       "16 octets of the IPv6 address, in network byte order.  Each ip
       packet contains two addresses, the source address and the
       destination address."
DECODING
       "Note: ether2.ip.ipip6.udp is a different protocolDirID than
       ether2.ip6.udp, as identified in the protocolDirTable.  As such,
       two different local protocol index values will be assigned by
       the agent. E.g., (full INDEX values shown):
       ether2.ip.ipip6.udp =
                       16.0.0.0.1.0.0.8.0.0.0.0.41.0.0.0.17.4.0.0.0.0
       ether2.ip6.udp =
                       12.0.0.0.1.0.0.0.41.0.0.0.17.3.0.0.0 "
REFERENCE

       "RFC 2460 [RFC2460] defines the Internet Protocol version 6; The
       following URL defines the authoritative repository for the
       PROTOCOL NUMBERS Table:

         http://www.iana.org/assignments/protocol-numbers"
::= {
       ether2     0x86DD,
       802-1Q     0x86DD,
       mplsu       41,
       mplsm       41
}

ipip6 PROTOCOL-IDENTIFIER
PARAMETERS { }
ATTRIBUTES {

  }
DESCRIPTION
       "IPv6 in IPv4 Tunneling"




Stephan & Palet              Informational                      [Page 4]

RFC 3919      RMON Protocol Identifiers for IPv6 and MPLS   October 2004


CHILDREN
       "Children of 'ipip6' are selected and encoded in the same manner
       as children of ip6."
ADDRESS-FORMAT
       "The 'ipip6' address format is the same as the IPv6 address
       format."
DECODING
       "Note: ether2.ip.ipip6.udp is a different protocolDirID than
       ether2.ip6.udp, as identified in the protocolDirTable.  As such,
       two different local protocol index values will be assigned by
       the agent. E.g., (full INDEX values shown):
               ether2.ip.ipip6.udp =
                       16.0.0.0.1.0.0.8.0.0.0.0.41.0.0.0.17.4.0.0.0.0
               ether2.ip6.udp =
                       12.0.0.0.1.0.0.0.41.0.0.0.17.3.0.0.0 "
REFERENCE
       "RFC 2473 [RFC2473] defines Generic Packet Tunneling in IPv6
       Specification."
::= {
       ip 41
}

icmp6 PROTOCOL-IDENTIFIER
PARAMETERS { }
ATTRIBUTES { }
DESCRIPTION
       "Internet Message Control Protocol for IP Version 6"
REFERENCE
       "RFC 2463 [RFC2463] Internet Control Message Protocol (ICMPv6)
       for the Internet Protocol Version 6 (IPv6) Specification "
::= {
       ip6 58,
       ipip6 58
}

6.  Security Considerations

  This document contains textual descriptions of well-known networking
  protocols, not the definition of any networking behavior.  As such,
  no security considerations are raised by its publication.

7.  Acknowledgments

  The authors would like to acknowledge the European Commission support
  in the co-funding of the 6QM project, where this work is being
  developed.





Stephan & Palet              Informational                      [Page 5]

RFC 3919      RMON Protocol Identifiers for IPv6 and MPLS   October 2004


8.  References

8.1.  Normative References

  [RFC2460]  Deering, S. and R. Hinden, "Internet Protocol, Version 6
             (IPv6) Specification", RFC 2460, December 1998.

  [RFC2463]  Conta, A. and S. Deering, "Internet Control Message
             Protocol (ICMPv6) for the Internet Protocol Version 6
             (IPv6) Specification", RFC 2463, December 1998.

  [RFC2473]  Conta, A. and S. Deering, "Generic Packet Tunneling in
             IPv6 Specification", RFC 2473, December 1998.

  [RFC2578]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Structure of Management Information Version 2 (SMIv2)",
             STD 58, RFC 2578, April 1999.

  [RFC2579]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Textual Conventions for SMIv2", STD 58, RFC 2579, April
             1999.

  [RFC2580]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Conformance Statements for SMIv2", STD 58, RFC 2580,
             April 1999.

  [RFC2895]  Bierman, A., Bucci, C., and R. Iddon, "Remote Network
             Monitoring MIB Protocol Identifier Reference", RFC 2895,
             August 2000.

  [RFC3032]  Rosen, E., Tappan, D., Fedorkow, G., Rekhter, Y.,
             Farinacci, D., Li, T., and A. Conta, "MPLS Label Stack
             Encoding", RFC 3032, January 2001.

8.2.  Informative References

  [RFC2021]  Waldbusser, S., "Remote Network Monitoring Management
             Information Base Version 2 using SMIv2", RFC 2021, January
             1997.

  [RFC2026]  Bradner, S., "The Internet Standards Process -- Revision
             3", BCP 9, RFC 2026, October 1996.

  [RFC2896]  Bierman, A., Bucci, C., and R. Iddon, "Remote Network
             Monitoring MIB Protocol Identifier Macros", RFC 2896,
             August 2000.





Stephan & Palet              Informational                      [Page 6]

RFC 3919      RMON Protocol Identifiers for IPv6 and MPLS   October 2004


  [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
             "Introduction and Applicability Statements for Internet-
             Standard Management Framework", RFC 3410, December 2002.

Authors' Addresses

  Stephan Emile
  France Telecom R & D
  2 avenue Pierre Marzin
  Lannion,   F-22307

  Fax:   +33 2 96 05 18 52
  EMail: [email protected]


  Jordi Palet
  Consulintel, IPv6 R&D
  San Jose Artesano, 1
  Alcobendas, Madrid, Spain  E-28108

  Fax:   +34 91 151 81 98
  EMail: [email protected]





























Stephan & Palet              Informational                      [Page 7]

RFC 3919      RMON Protocol Identifiers for IPv6 and MPLS   October 2004


Full Copyright Statement

  Copyright (C) The Internet Society (2004).

  This document is subject to the rights, licenses and restrictions
  contained in BCP 78, and except as set forth therein, the authors
  retain all their rights.

  This document and the information contained herein are provided on an
  "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
  OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
  ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
  INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
  INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
  WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

  The IETF takes no position regarding the validity or scope of any
  Intellectual Property Rights or other rights that might be claimed to
  pertain to the implementation or use of the technology described in
  this document or the extent to which any license under such rights
  might or might not be available; nor does it represent that it has
  made any independent effort to identify any such rights.  Information
  on the IETF's procedures with respect to rights in IETF Documents can
  be found in BCP 78 and BCP 79.

  Copies of IPR disclosures made to the IETF Secretariat and any
  assurances of licenses to be made available, or the result of an
  attempt made to obtain a general license or permission for the use of
  such proprietary rights by implementers or users of this
  specification can be obtained from the IETF on-line IPR repository at
  http://www.ietf.org/ipr.

  The IETF invites any interested party to bring to its attention any
  copyrights, patents or patent applications, or other proprietary
  rights that may cover technology that may be required to implement
  this standard.  Please address the information to the IETF at ietf-
  [email protected].

Acknowledgement

  Funding for the RFC Editor function is currently provided by the
  Internet Society.







Stephan & Palet              Informational                      [Page 8]