� H5@ Ls ��� �������� T3q3�3�3�3�3�3�3�3424@4Y4p4z4�4�4�4�4�4�4�4�4�4�4�4�4?RTEFTP-x-� @Ns < ? 1 _ , �Q ,S �� jS� �U� j\� �RN ��N ��! �UH d[��&O �tO��RN ��N �� jZh �&O �tO��RN ��N ��Q vYH � dX��&O �tO��RN ��N ��A �Wh � dX��&O �tO��RN ��N ��B Y � �X� �tO��RN ��N �� jZ d[� d[��&O �tO��RN ��N ��C �[�� �[�S �[�B vY �&O �tO��RN ��N �� ~_
�&O �tO��RN ��N ��D �^
� dX��&O �tO��RN ��N ��$ �` d v_ � l_ 4 a>
�&O �tO��RN ��N ��t Pa��&O �tO��RN ��N �� ` � ` A� � A� � 2r Copyright 1988, 1989, 1990, 1991, 1992, 1993 by
Megan Gentry, Framingham, Mass
All Rights Reserved
UInsufficient pool memory, use /BUFF:65366. UWrong version of RT-11 UXM Monitor required UTimer support required UEthernet handler not available - �UEthernet handler must be loaded - �UInvalid multicast address �UInvalid protocol type �UInsufficient memory UError opening channel to Ethernet UUnit allocation error UMulticast enable error UProtocol enable error FCommand too complex FUnbalanced quotes FInvalid command �FAmbiguous command �FInvalid syntax FInvalid option �FAmbiguous option �FInvalid node �FUnrecognized node �FInvalid input file �FInvalid output file �FNode specification required FInsufficient pool memory to fetch handler FInvalid device �FInsufficient memory for handler - �FUnable to fetch handler - �FInvalid multiple node copy IInsufficient resources to queue FFile not found �FDelay for node � expired FNode specification required FInsufficient local resources W�FHelp not available for �FAmbiguous topic �FInvalid access specification FAccess control list is full FInvalid option: /�FInsufficient space to expand access control list FNode name already in use WNode name truncated to six characters FDate not set FRemote access must be enabled first FOnly one timebase allowed Access control list: Unrestricted remote access allowed � Operating characteristics Program version = � Protocol version = � Multicast address = � Protocol type = � Number of receive buffers = � Number of virtual circuits = � Number of active circuits = � Access control list limit = � Remote Node Directory limit = � Available memory = �. bytes Virtual circuit status: Circuit �, idle , synchronizing , on Performing directory of � for node � Sending block � Receiving block � of file � to remote node � from remote node � Local node information: Name = � Station address = � Broadcast is �disabled enabled Logging is �enabled disabled Time base is �enabled disabled Remote node table: Name = � Station address = � Broadcast is �disabled enabled Logging is �enabled disabled Time base is �enabled disabled File system is �, level = � IAdjacent node unavailable - � ITimed-out waiting for response from node � IConnection timed-out to node�, transfer aborted - �, directory aborted� - � IAdjacent node � changing name to �WRemote node directory is full WInsufficient memory to expand remote node directory IAdjacent node available - � IBeginning send of � to � IBeginning receive of � from �FUnable to create file �FConnection rejected, �status = �FError writing file to �FError writing file � ITransfer completed, � ITransfer aborted, � IBeginning directory of � for � � Files, � Blocks� IDirectory completed, �WRead �WWrite �access rejected to node � for �RTEFTP Y01.3610 RTEFTP> �Option? �Node name? �Filespec[/option...]? �Topic? �From? �To? �Node? �Text? �Abort active circuits? �Broadcast message from �Message from �YES ALL 6%�:BROADCAST @%�;CLEAR J% <COPY T% ADELAY b%PADIRECTORY l%�BEXIT v%�CHELP ~%�;SET �%�;SHOW �%�DACCESS �%�EALL �%�EBROADCAST �%�ELOG �%�ENAME �%FNODES �%|FTIME �% DEVICE �% QUEUE �%'BROADCAST &(CLEAR &N*COPY &�+DELAY &&q-DIRECTORY 0&t.EXIT :&@2HELP B&�.SET L&�0SHOW Z&�FACCESS h&�GBROADCAST p&�GLOG z&�GNAME �&�DNOACCESS �&�ENOBROADCAST �&�ENOLOG �&�ENONAME �&|FNOTIME �&�HTIME �&�HACCESS �&�IALL �&�ICHARACTERISTICS �&�JCIRCUITS 'VLNODES BROADCAST Sends messages to other nodes
SYNTAX
BROADCAST [node_name|ALL] "text"
SEMANTICS
Text to be sent must be enclosed in double quotes
or all but the first word will be lost. Any node
specified must be enabled for remote access.
CLEAR Clears local operating information
SYNTAX
CLEAR [option]
SEMANTICS
The CLEAR command requires a single option.
OPTIONS
ACCESS [dev:filnam.typ]
Clears access control list, allowing unrestricted access
Optionally allows removal of an access list element.
BROADCAST
Disables reception of broadcast messages
LOG
Disables event logging
NAME
Clears local node name, disabling remote access
NODE [node_name]
Clears the list of nodes accepting remote access
Optionally removes element for specified node.
TIME
Disables time service
COPY Copies files from one node to another
SEMANTICS
The COPY command accepts a single input and a single
output specification. Wildcards are not supported.
QUALIFIERS
DEVICE Allow non file-structured write of local device.
QUEUE Perform transfer while allowing further commands.
DELAY Delays further program execution until a specific
node is available for remote access.
SYNTAX
DELAY [node_name]
SEMANTICS
The DELAY command is useful from within an indirect
command file for delaying further command processing
until the required node is on-line. A single 1-6
character node name is accepted. If the node does not
become available within 1 minute, the program stops
waiting.
DIRECTORY Obtains and displays a directory from a remote node
SEMANTICS
The DIRECTORY command accepts one node specification, one
device specification and up to six file specifications.
EXIT Exits file transfer program
SET Set program characteristics
SYNTAX
SET [NO]option option_value
SEMANTICS
The SET command accepts one option and its value
OPTIONS
ACCESS file-spec[/option...]
Establishes access rights, options include:
D Non-file-structured access allowed
E Access excluded
L Explicit device access required
R Read access allowed
W Write access allowed
BROADCAST
Enables reception of broadcast messages
LOG
Enables transaction logging
NAME
Enables remote file access, establishes name
for local node.
TIME
Enables local node as time base
SHOW Displays status information
SYNTAX
SHOW [option]
SEMANTICS
The SHOW command accepts one option
OPTIONS
ACCESS
Displays access control list
CHARACTERISTICS
Displays operating characteristics
CIRCUITS
Displays virtual circuit status
NODES
Displays list of nodes accepting remote file access
HELP Lists helpful information
SYNTAX
HELP [topic]
SEMANTICS
HELP lists the HELP text (of which this is a part)
HELP * lists the items for which help is available
HELP topic lists information on the specific topic
Help is available for the following:
you Transfer process unavailable�Invalid file specification�Unknown device�Device unavailable�File not found�Unable to create file�Unable to close file�Protocol mismatch�Insufficient space available�Non file-structured access�Access denied�Special directory device�Insufficient resources�I/O Error�Unable to perform function�Node is not accepting connections�Unknown�PDP-8�RT-11�RSTS�Files-11�U**x�DSM�Unknown�CP/M�UCSD P-system�MS-DOS�D�E L@RW 0123456789ABCDEF ABCDEFGHIJKLMNOPQRSTUVWXYZ$%*0123456789� �� ��� &2� �� @w D��� �� ��� �E� h,w L��� �� ���5 �^� F,w *�5 �t� 4,w ��� �� ����WZ�5 �(ZN�5@ ��ZB� >�:����6 ��� ��� *Ѐ �e 7`����.����� �+� ���� �.����K� J�G��� �+��5 ���� �+���l
� 4-����0�-������� h+���h
� -���� 4� �� *�&� �� �d� �� Z�V� �� L�� � � �U $ � :��� �� ���5 � �5�$ f�E� �% � @w
�w�5 � �5�$ �e`f�E� �% �@� � � �*w X� ��� ��8 ���� �*w :�5�$ 7����
�. ����"� ^*w ���
� �^
0
��� 0
