Volume 4, Number 15 20 April 1987

Volume 4, Number 15 20 April 1987
+---------------------------------------------------------------+
| _ |
| / \ |
| /|oo \ |
| - FidoNews - (_| /_) |
| _`@/_ \ _ |
| International | | \ \\ |
| FidoNet Association | (*) | \ )) |
| Newsletter ______ |__U__| / \// |
| / FIDO \ _//|| _\ / |
| (________) (_/(_|(____/ |
| (jm) |
+---------------------------------------------------------------+
Editor in Chief: Thom Henderson
Chief Procrastinator Emeritus: Tom Jennings

FidoNews is published weekly by the International FidoNet
Association as its official newsletter. You are encouraged to
submit articles for publication in FidoNews. Article submission
standards are contained in the file ARTSPEC.DOC, available from
node 1/1.

Copyright (C) 1987, by the International FidoNet Association.
All rights reserved. Duplication and/or distribution permitted
for noncommercial purposes only. For use in other circumstances,
please contact IFNA.

Table of Contents

1. EDITORIAL
International Mail
2. ARTICLES
Financing Fido
Patrick Troughton (the second Dr. Who) Dies
Fidogram - Free Telegram Service
Notes From MemphisNet
Talking Assembler (Part 2)
Tradewar Anyone?
CAP and the Dayton HamVention
Vietnam Veterans "Convoy to the Wall"
3. COLUMNS
Column Without a Name
4. WANTED
Any Harvard Summer School students?
5. FOR SALE
BIG BLUE DISK #7 - Latest issue of magazine on disk!
6. NOTICES
The Interrupt Stack
IFNA Board of Directors Ballot

Fidonews Page 2 20 Apr 1987

=================================================================
EDITORIAL
=================================================================

International Mail

Network mail has been moving internationally for over two years
now, but it's never really worked well. Anybody can send
international mail, provided:

1) You have International Direct Dialing (IDD), which is not
available in many areas.

2) You can figure out how to cope with the extra delays involved
in international dialing.

3) You don't mind paying for busy signals. (In most areas you are
charged per attempt, NOT per connect!)

4) You can figure out when the person in the other country will
be able to receive network mail.

5) You can figure out which overseas nodes use modems that are
compatible with your own. A non-trivial problem that the
overseas sysops themselves have trouble with!

About the best that it's ever worked was when Dave Rene (101/27)
had a clandestine link with a fellow employee in England. Every
night he would pump echomail over to him using his company's
network. This had the odd effect of making England part of the
Massachusettes network.

That MassNet<=>England link was taken by the FTSC (Fidonet
Technical Standards Committee) as the model for how international
mail ought to work.

Briefly, the entire Earth was divided into zones. The present
zones are:

Zone 1 - North America
Zone 2 - Europe
Zone 3 - Australasia

It is anticipated that other zones may be established as nodes
crop up in other parts of the world, or on other worlds. Whether
Lunar Nearside and Lunar Farside should be in one zone or two is
an interesting topic, but not one that will be addressed here.

Each zone will have a "zone gate" to every other zone. It is
assumed that a zone gate has some free method of moving mail to
the other zone (on the face of it a ridiculous assumption, but
thankfully there seem to be such people). Tentative zone gates
have already been selected for mail going from zone 1 to both of
the other zones.

Fidonews Page 3 20 Apr 1987

There remains the software needed to implement zones. This falls
into three categories:

1) Nodelist translators; XlatList 2.70 can already handle a node
list with zones. Others may need to be modified.

2) Message entry programs; SEAdog 4.0 can already create messages
with interzone addresses. Others will need to be modified.

3) Zone gate interfaces; A program (appropriately called
"ZoneGate") has already been written to handle this, but it
has not yet been extensively tested.

So as you can see, international mail is well in hand. With any
luck at all we should have functional international mail channels
working in a matter of months.

-----------------------------------------------------------------

Fidonews Page 4 20 Apr 1987

=================================================================
ARTICLES
=================================================================

Eric Ewanco
SEAdog/Opus private node 130/3

Financing Fido

The article in the April 5th issue of FidoNews really piqued my
curosity on both a large net and alternative methods of sending
mail. Fido has a great advertising capability, and there are many
many multi-billion dollar companies out there that should be
willing to give us grants, buy ads from us, or offer discounted
services. For instance, perhaps we can hook AT&T into giving
Fidonet nodes a large discount on phone rates. I would love to
see the net evolve into one independent of the phone system,
depending on grants of communications systems that would make a
message cost nothing no matter where sent. Or maybe it would
depend only on local calls. Maybe Tymnet or Telenet will give us
free network time, or discounted. If we collected "taxes" of a
minimal amount, $10 a year maybe, that could help offset the cost
of the whole thing. Interfacing with short-wave radio is an
excellent idea, too. We could set up advanced routing stations
for this.

Maybe by the time I get out of college in 5 years, I can work
for IFNA, professionally managing such a site. Now that IFNA's a
non-profit organization, doors are opened for grants and corporal
organization. Who knows, maybe we can wrangle funds from the
government. The ~arc (Association for Retarded Citizens, with a
dove before it) is already making use of Fido, and other related
non-prof organizations are too, and the government may find
interest in it, plus the possiblities for war or getting
information fast across the country. How about this on the 1040:
"Would you like to contribute $5 to the International FidoNet
Organization, a non-profit organization offering free
communications across the world?" That's a coupla million dollars
a year. Fidonet has great possiblities; let's explore them as
much as possible. But before we can, we do need to work on
forming something more tangible, which we are, through IFNA. But
let's not get into politics, or secret organizations, or anything
else; let's model ourselves on other non-profit organizations.

Another thing: HOSTS, PLEASE DISTRIBUTE EVERY FIDONEWS TO
YOUR NODES, and NODES, PLEASE READ THE FIDONEWSES AND DISTRIBUTE
THEM TO YOUR USERS. USERS, PLEASE SPREAD INTERESTING ARTICLES
AROUND TO NON-COMPUTER PEOPLE. In this way, we can increase
FidoNews's circulation, and possible income from ads. Hey, why
don't we get a newspaper company to publish it for us? That cost
is very very minimal, and it will put FidoNews in everyone's
hands.

All nodes, please be mature; if you have problems with
another node, or a subordinate, or a superior, don't SCREW UP THE
Fidonews Page 5 20 Apr 1987

NETWORK by doing childish things like kicking them out because
they like another piece of software and want to strengthen the
net. United we stand, divided we fall. Don't let personal
problems screw everything up. THERE IS NO ROOM FOR IMMATURE
ACTIVITY IN FIDONET! Thanx...

I make a motion we nominate Wynn Wagner for next year's
Fleugalman (sp?) award, the creator of the "MILITANTLY PUBLIC
DOMAIN" no-tm Opus software. He's going to do a lot for Fidonet!

Eric Ewanco
SEAdog/Opus 130/3 (private node)

-----------------------------------------------------------------

Fidonews Page 6 20 Apr 1987

Jean Airey, 132/[email protected]

Patrick Troughton Dies

(The following was sent to DW clubs belonging to the "APC
Network". Any clubs or club members on this net, please feel
free to copy)

Date: March 31, 1987

It is with very great regret that I must inform you that Patrick
Troughton died at 7:25 AM Saturday Morning, March 28 in Columbus
Georgia. While the paramedics called to help did everything they
could, he was officially pronounced dead on arrival at the
hospital. The paramedics believed he had died instantly. He was
appearing at Magnum Opus Con - 2.

Pat was born March 25th, 1920 and was known and loved by DW fans
as the actor who created the Second Doctor. He played the role
from November 1966 - June 1969 and later returned to the program
to do "The Three Doctors" with Jon Pertwee and Willian Hartnell;
"The Five Doctors" with Richard Hurndall, Jon Pertwee and Peter
Davison; and "The Two Doctors" with Colin Baker.

One of the very best of British character actors, he was at first
reluctant to take on the role of The Doctor,fearing that it might
cause him to lose the anonymity that he valued highly. The
Doctor he created remains in the hearts of many fans as the most
vulnerable and humorous. After 1969 he continued his career with
appearances in over 20 TV series including "The 6 Wives of Henry
The VIII," "The Persuaders," "Jenny," "The Survivors," "Space
1999," "The Feathered Serpent," "The Sweeney," "Treasure Island,"
and "The Magic Box." Some of his major film appearances were in:
"Scars of Dracula," "Sinbad and the Eye of the Tiger," and "The
Omen."

Until 1983 he was noted for not giving interviews of "doing"
conventions. However, in the spring of that year he was at the
BBC Longleat Festival and gave an interview to the "Doctor Who
Monthly" (#78). In November of 1983 he came over to America to
the first of the Chicago "Monstercons," with some 20 other
guests. In spite of that conventions' confusion, it would seem
that he enjoyed the experience as he has returned several times
since to do more Spirit Of Light conventions as well as several
for the Doctor Who Fan Club Of America. He greatly seemed to
enjoy the spirit of the fan conventions such as OMNICON. He was
scheduled to do several "stops" with the BBC Festival Tour later
this year. He always seemed to enjoy meeting fans and the word
from some people at the convention is that although he had a very
light "official" schedule on Friday, he spent most of his time
walking around, talking to people, signing autographs and "having
a good time."

He will be very much missed by all of us.

Fidonews Page 7 20 Apr 1987

The family has asked that no flowers be sent. Cards may be sent
c/o the "Doctor Who" Production Office, BBC TV, Union House,
65/69 Shepherds Bush Green, London, England W12 7RJ. If anyone
wishes to make a donation in Pat's memory to a cause he cared
about, it should be to Cancer Research.

--
Jean Airey: US Mail 1306 W. Illinois, Aurora, IL 60506
ihnp4!hrcca!jean
--
Posted to the FidoNews by Kurt Reisler,
SYSOP, The Bear's Den, Fido 109/74.

-----------------------------------------------------------------

Fidonews Page 8 20 Apr 1987

FidoGrams

Free Telegram Service

Cape Cod Fido is still offering it's free telegram service. Yes,
you saw it correctly - free. In addition, we now have a west
coast outlet to send messages through in addition at node 114/15.
Through the courtesy of the thousands of dedicated Amateur Radio
Operators who make up the American Radio Relay league's National
Traffic System, Fidonet now allows you to send FidoGrams to
almost anyone, almost anywhere, regardless of whether or not that
person is even remotely interested in computers, modems or
terminal software. There are literally thousands of uses for
this free FidoGram service. Examples include:

1. Sending greetings during holidays, birthdays, or just to
renew old acquaintances.

2. Sending batches of messages to your club members who are
scattered all over the country.

3. Making all your old cronies green around the edges by
announcing your next month-long cruise to Timbuktu, or
bragging about your recent engagement to Mr/Ms wonderful.

4. College students: telling Ma how much you miss her apple
pie.

5. Requesting health and welfare information on friends or
family located (or not yet located!) in a disaster area.

As with anything neat like this, some cautions are in order.
Since these FidoGrams are not sent over commercial circuits such
as Western Union, or RCA, but rather via FCC-controlled Amateur
Radio Circuits, there are some constraints. First, if you really
want to make Fido curl up his lip, bare his teeth and growl, just
try sending a free Fidogram that relates in any way to business,
or the making of a profit by any party. Fido will make kitty
litter out of anything that does not look like a personal, non-
business message. Don't even attempt it. Ditto for profanity.
Second, when utilizing the services of many volunteers, you must
consider the length of your messages. The simplest way to do
this is to pretend that you were paying the standard 67 cents per
word! Keep your messages short and to the point. The radio
operators may even then elect to break up your messages into more
than one telegram. How lengthy is lengthy? Perhaps 20-30 words
per message max. Just use discretion.

Allow several days for delivery. In other words, don't expect a
Fidogram that arrives at Cape Cod Fido on Feb. 13th to be
delivered in time for Valentine's day...

How will your free telegrams be delivered? After being routed
throught the National Radio Traffic System to the ultimate point
of destination, the telegram will be telephoned - just like the
commercial boys.
Fidonews Page 9 20 Apr 1987

Here's what Fido needs in order to keep his telegram tail-a-
waggin:

1. Y-o-u-r name, address, and telephone number in case we
need to get back with you, or in case there is a return
message going your way.

2. The full name, adddress, and telephone number of the
persons you wish to send telegrams to.

3. The message.

4. A signature.

That's the grand total. Where can you send free FidoGrams? To
anyone in the USA or Canada who has a telephone, and to many
countries overseas. Read the file called "COUNTRY" for the list
of countries whose governments allow free telegrams. Here's some
examples of free FidoGram format and content. Use your own
format at will, but be sure to include all info.

Is there a limit to the number of free FidoGrams that you can
send at any one time? No. As a matter of fact, the Amateur
Radio Operators use these telegrams as a way of exercising their
emergency communications apparatus. They welcome large loads in
order to practice for the times when emergencies create huge
volumes of message traffic. Just t-r-y to inundate them...

If you wish to send FidoGrams, or if you have further questions,
or can offer suggestions as to how to improve this exciting new
service, send the messages to Fidograms at either Node 105/101
for the east coast, or 114/15 for the West Coast .

Be CERTAIN to leave your complete voice telephone number and
address so that we can respond to your question by Fidogram,
without invoking Fidomail charges...

We hope you'll use this service often, and will gain much
enjoyment from it.

-----------------------------------------------------------------

Fidonews Page 10 20 Apr 1987

Jerry Hindle, 123/6

Notes From MemphisNet

Well, yet another month or so has gone by and things seem to
be moving along very nicely here. After my last article was run,
telling you about my have installed SEADOG (tm) V4.0, I got a
tremendous number of calls to get the file list via file request.
I only encountered one problem and I believe this was due to the
long delay time from Australia to here on phone connections. I
apologize to the PNG Connection in down under land for this and
am trying to get a list together for you that is small enough for
me to file attach to you since I seem to have better luck
contacting Australia then Australia does in contacting me.

First and foremost is of course SEADOG... Thom Henderson and
crew have certainly outdone themselves this time I assure you.
Not only have they made an excellent program better but they have
managed to keep it tidy. Usually you find most upgrades are
merely butchered and patched copies of older versions, not so
here. I have never used SEAdog before but after reading about 2
sentences (the usual amount of time I devote to reading "docs" I
looked at the disk and found out they made it dummy-proof. Heck
even I could install this thing. I had a small amount or trouble
trying to stay calm while this thing did strange things to my
hard drive and files and was calm again only after I got the
infamous C> . I do wish the docs had covered OPUS a bit more but
after sending a note to Thom I found he had wished so too, alas
the OPUS docs didn't arrive in time to make the publishers date
and the docs were somewhat lacking on this subject, Thom however
assures me that future editions will remedy this one minor
shortcoming. I am still trying to figure out the routing stuff,
but in the meantime I copied all my route.xx files to one large
"route.dog" file and everything is running smoothly. Hint here
Thom. You may want to look over the docs on routing a bit more
and show some examples of route.dog files for a host system and
maybe a hub or two to give the users a feel for the system. I
found the operation to be clean and bulletproof again emphasizing
the ease of use. Almost everything is function key driven and
little mini-menus will pop up all over the place to guide you
should you ever become "lost". Anyway as I said if I can install
it ANYBODY can. Thom, it is well worth the $100 I paid for it,
but again like anything I buy, you put it "on sale" right after I
got mine, this however is the story of my life and I am glad I
paid full price for it since I can now make numerous phone calls
to the guru and get straight on routing for a host system.

Item #2: MAIL and CALLERS........I have received updates
from Ben Baker on PRUNE and have received in a round about way
from New York a program called "MINILIST", I have gotten updates
on OPUSCOMM (ie version 2.73) and ONODE (v 1.31). I would ask
that Wynn (if he has time to read this) or someone connected with
OPUS let me know a day or so ahead of the release date so I can
get copies of OPUS updates for the distribution section here. YES
I do carry OPUS and OPUS utilities here too along with all the
Fidonews Page 11 20 Apr 1987

stuff I have for FIDO. I am sorting thru the Fido stuff right now
to see what will and what won't work with OPUS. If it will work I
will list it in BOTH directories. If it will only work with one
or the other I will place it in the directory where it belongs. I
have gotten a program called CRASH from 18/14 and according to
the author it allows FIDO to do CRASH MAIL !!!!! He also alluded
to the fact that he is working on a way to have Fido handle file
requests and other assorted goodies like that. I am no utility
author but it seems to me that we have a large number of people
out there still working with Fido and writing stuff for it.
Great, I still have about 6 meg to go to fill up the system, I
may just make it yet. CALLERS......I allow first time callers
access to the following areas:

1: General Message and File Area

2: Fido/SEADOG Distribution Area (associated msg area is a
local echomail)

3: FidoNews (I have all of this year on-line and can put ANY
issue(s) up on request. For those out there supporting
CBM I have FidoNews in PETASCII for the Commodore and
ARCED using ARC230 for the Commodore computer. Arc230 is
also available here.

4: OPUS Software Distribution Files Area (associated msg
area is an open debate section.

Although you will not be able to enter any messages you are
free to d/l as much as your phone bill can handle. I don't keep
track anyway. All I ask is if you have something I don't in the
way of Fido/Opus/SeaDog utilities and support files, UPLOAD it
PLEASE !!!!! This is the ONLY way to keep things going here.
Again if you want to find out what I have here you can file
request the file DISTRIB.ARC, this is as complete a list as
possible here since it is updated every AM by the system. It
will show all areas here and tells you if it is available by file
request or not. I included the other stuff for info purposes ONLY
in case you decide to play real caller and register here. This
file is located in the NetMail files area (area 6) if you are
calling as a "human".

Now on to other news. We are growing here in Memphis, Adding
1 system this week and another coming on-line in another week.
Both systems are OPUS/FIDO combos so you know what to expect
there. The additions to MemphisNet are:

123/10 Timothy McNeill (registration on first call, access after
verification).
123/2 Ken Akins (again preregistration is required)

Give them a call should you want to, I am sure they will
appreciate the "business".

Ok well, I guess that's all for this installment. Questions
may be directed to me if you want to ask them, I may or may not
Fidonews Page 12 20 Apr 1987

have an answer for you but I will try to place you in contact
with someone who does. Also if you have a program you want placed
here let me know I will file request if possible or arrange some
other method of getting it. I ask if possible you send it here
anytime you want to or if not possible let me know how I can get
it from you. I am doing this for you, not myself. I run only 2
items here. SEADOG & OPUS. Both excellent and both running
flawlessly (knock on floppy drive) right now.

TO: Tim Peeters; I would love to give you the modem maze
game, however since I downloaded it from a system in Dallas I do
not have any docs, nor do I know who the original author is, thus
I can't in all fairness release it for d/l. I did modify the
entire thing here to fit my needs and made it a selectable item
on the bulletin, I added a few twists and turns to it and am
always expanding it. If the author is reading this I would
appreciate a copy of the original release version, so I can make
sure I give out all the files you intended in it. I got a
"doctored copy" and don't want to release it without your say-so.

To: Ben Baker; Thanks for Prune
To: Sysop 18/14 Thanks for CRASH
To: whoever in NYC that sent MINILIST to 123/8 a BIG THANK
YOU (she needed it, I also got copies of the other stuff
you sent to her)
To: The rest of the NET , Thank you for making my hobby so
much FUN !!!!!

I enjoy helping out where I can and I think I found a nifty
little niche here.

Jerry Hindle
123/6 123/0
MemphisNet
2400 baud MAX
901-353-4563

-----------------------------------------------------------------

Fidonews Page 13 20 Apr 1987

Ned Sturzer
OpusNODE 362/1
Chattanooga, TN.

TALKING ASSEMBLER 2
by
NED STURZER

The computer hardware understands only one language - Machine
Language. A program in any other language is merely data acted
upon by a translator program, itself ultimately written in
Machine Language, and converted into a Machine Language Program.
There are two types of translator programs - compilers and
interpreters. A compiler produces a distinct Machine Language
program which may then be executed by the computer. An
interpreter, on the other hand, does not produce a distinct
Machine Language but carries out the functions of our program
immediately. A compiled program usually executes more rapidly
than the interpreted version since the translation into Machine
Language has already been performed. With an interpreter the
translation must be carried out each time the program is run.
Moreover, less computer memory is required since only the
compiled version need reside in memory to be executed. In the
interpreted version both the program and the interpreter must be
in memory. Interpreters are not to be despised however, since
they are almost always easier to debug.

Assembler is in all cases a compiled language. Traditionally,
Assembler has been regarded in a somewhat different light than
other languages. In the early days of computers assemblers were
simply direct translations of Machine Language and thus they were
somewhat distinct from other languages. This is no longer the
case. What is true is that Assembler Language closely mimics
Machine Language though I showed in the last article that they
really are distinct. Assembler Language has three great str
engths. It is functionally equivalent to Machine Language and
thus can use the full power of the computer. It is fast. Since
Assembler does closely follow Machine Language the fastest
possible code may be utilized for a program. It makes efficient
use of memory. This is again the result of Assembler's close
relationship to Machine Language. Assembler's weakness is the
complexity of writing I/O routines and floating point routines.
In the compilers and interpreters of other languages these routin
es are built in.

The text of an Assembler Language program is often seen as a
combination of two types of instructions - machine instructions
and instructions to the Assembler. Machine instructions are those
parts of the text which are translated directly into Machin e
Language instructions, while instructions to the Assembler mostly
initialize areas of memory at the start of the program, or tell
the assembler how to go about its job of translating Assembler
Language code into Machine Language code.

An Assembler Language program consists of a series of
statements. Most statements have the following syntax:
Fidonews Page 14 20 Apr 1987

{name} mnemonic {operand,operand,...} {;text}

Here the {} indicates the entry is optional. Name acts as a
label so the statement may be referred to by other statements.
The mnemonic or op code is the main part of the statement.
Different mnemonics require different numbers of operands. The
;text is used for comments and is otherwise ignored by the
assembler. The length of the first three sections of the
statement may be a maximum of 128 characters.

Before describing the 120 different machine op codes, as opposed
to the many assembler codes we need to understand the flags
register and the different adressing modes.

The flags register has the following format:

bit: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
flag: O D I T S Z A P C

As far as I can tell, the blank bits are unused and presumably
could be employed in a program though I have never seen this
done.

The C or Carry bit is affected primarily by arithmetic
operations and by certain shift or rotate operations. In addition
operations the bit is set (to 1) if there is a carry of the high
order bit, otherwise it is cleared (to 0). Subtraction
operations set or clear the carry bit depending on whether or not
there is a borrow of the high order bit.

The P or Parity flag is affected by most data altering
operations. When the low order byte resulting from such an
operation has an even number of 1's the parity flag is set. An
odd number of 1's clears the flag. Parity is not one of your more
useful flags.

The Auxiliary Carry flag, A, is used only by the few binary
coded decimal (BCD) operations provided by the 8088. The A bit is
set or cleared depending on whether or not there is a carry fron
bit 3 in such an operation. Certain other operations affect this
bit in an unpredictable way.

Like the P flag, the Zero flag is affected by data altering
operations. If the operation results in a 0 the flag is set,
otherwise cleared. Unlike the P flag, the Z flag is extremely
useful.

The Sign or S flag is affected by arithmetical and logical
operations. A positive result clears the flag while a negative
result sets the flag.

While the Trap bit, T, is set the program will execute an
interrupt 1 after every instruction. This enables us to single-
step through a program or do other interesting things. I'll
discuss interrupts in the next article. As you would expect few
Fidonews Page 15 20 Apr 1987

instructions affect this flag.

The I or Interrupt bit when set enables hardware interrupts. If
cleared all hardware interrupts except memory errors are
disabled. Only a few op codes affect this flag.

Within its instruction set the 8088 has a number of operations
which allow for either forward or backword movement through a
block of data. These string instructions are used in conjunction
with the SI and DI registers. When the Direction flag, D, is
cleared these registers will be incremented after a string
instruction. Should the D bit be set these registers will be
decremented after a string operation.

The final flag is the Overflow Flag, O. This bit is affected by
arithmetic operations and is set when the result of an arithmetic
operation on signed numbers is of too large a magnitude to be
represented. This will be discussed in full detail when I review
the arithmetic operations.

This is as good a spot as any to jump into the nitty-gritty of
Assembler Language. An assembler program consists of a series of
assembler statements as described above. The characters that may
be used to form these statements are the following:

abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789!@# $%^&*()_-+={}[]:;",./<>\`'?|~

In most cases the assembler does not distinguish between lower
and upper case letters. Integers are represented as

digits (uses default radix)
digitsB (binary)
digitsD (decimal)
digitsH (hexadecimal)

Hexadecimal integers must always begin with a digit (0-9). Thus
0a34H rather than a34H. Octal integers (base 8) may also be
represented but I will ignore them. I will also neglect all
material only relevant to the 8087. Unless changed the default
radix is decimal. The default radix is set by the .RADIX
statement
.RADIX 2 (binary)
.RADIX 10 (decimal)
.RADIX 16 (hexadecimal)

A b,d, or h assignment to an integer takes precedence over the
default radix.

String constants consisting of one or more ASCII characters are
also used in Assembler Language. A string constant is represented
by 'string' or by "string". If it is necessary to use a ' but '
is the string delimiter then represent ' by ''. Similarly when "
is the delimiter "" is used to represent ". For example, 'The
symbol '' is called a single quotation mark.'

Fidonews Page 16 20 Apr 1987

The name used in a name field must be constructed according to
certain rules. The first character in a name must be a letter of
the alphabet, _, @, $, or ?. The remaining characters can be any
of the symbols in the list above. A name can be any length but
only the first 31 characters are considered by the assembler. A
mnemonic may not be used in a name field. The assembler assigns
each name a type. The type can be one of the following depending
on the intended use of the name: BYTE, WORD, DWORD, NEAR, FAR.
Type may also be the name of a structure. We will define
structures later. To assign a specific type to a name you may use
the LABEL mnemonic in the syntax

name LABEL type

If the name is intended to represent a (symbolic) address for a
machine instruction then a NEAR type name may also be achieved in
two other ways as shown by these examples:

routine: pop ds
or by
routine: pop ds

Names must be defined only once in a program.

A NEAR type merely means that the name is in the same segment
(defined by the cs register) as any statement that refers to the
name. If a name is assigned a FAR type it may be referred to from
anywhere in the program.

Should you need to reserve memory for data or to have data
initialized to some value at the start of a program you may use
the DB, DW, or DD mnemonics. The syntax of the DB (define byte)
mnemonic is {name} DB value,... The values may be integers,
string constants, constant expressions (to be defined later), ?,
or DUP operators. If a name is given it is assigned type BYTE.
Consider the example db "valid",5. When assembled this will
assign six successive locations in memory with the ASCII values
of v, a, l, i, d, followed by 5. A value of ? does not define an
initial value but merely reserves a byte of memory. The DUP
(duplicate) operator has a syntax of

count DUP(value,...)

where count is an integer indicating the number of times the
values are to be duplicated. Values may be any expression
evaluating to an integer, the ? operator, a string constant
consisting of a single character, or another DUP operator. The
DUP operators may be nested 17 deep. As an example consider

memory_value db 4 dup("*",2 dup(56,11),?)

The definition of the DW (define word) and the DD (define double
word) are similar to that of DB. Remember that a word is two
bytes and a double word is four bytes.

We are now in a position to begin studying the machine op codes
Fidonews Page 17 20 Apr 1987

and this we will do in the next article.

(Article taken from the Chattanooga Computer Society Newsletter.
Ned Surzer can be reached via The Last Resort BBS, message area
20, OpusNODE 362/1, 615-892-7773)

-----------------------------------------------------------------

Fidonews Page 18 20 Apr 1987

John Bekas, 115/212

Tradewar Anyone?

Tradewar (Copyright Chris Serrick for Nochange software) is a
multi-user game that allows users to challenge each other to be
master of the universe. This is done by trading Equipment,
Organics, and Iron Ore to different star-ports. You get rated on
how many credits you have, and how many fighters and cargo holds
you have. You can even blow someone up!

Ok, if you think this sounds exciting, and would like to have
it in your Outside games, any help would be graciously accepted
to change this program from BASIC to Turbo Pascal or C. I am
learning Turbo Pascal, and I don't know much about all the
commands, so I would appriciate any and all help.

I have most of the main program coded already, but for test
mode only, I haven't even come close to being able to make the
data files, and sector data files needed to use the game in full
function. If you know something about writing data files in
Turbo Pascal or C, please let me know, and you can help me :-).

This program should be released (Version 1) sometime in the
summer. The sooner I get it working with a data file, the sooner
I can tell you about the release date. Release notice will be
announced in FidoNews.

Thank you for reading this, and if you can help me out, please
call Beaker's Beacon OPUS at (312) 589-2827. 300/1200/2400 bauds.
For the purpose for calling, put "Help with Tradewar" on one of
the lines.

-----------------------------------------------------------------

Fidonews Page 19 20 Apr 1987

Stanley Quayle
Fido 126/1

CIVIL AIR PATROL

and

THE DAYTON HAMVENTION

The Ohio Wing of the Civil Air Patrol invites everyone to the
Dayton HamVention, April 24-26, 1987.

The Dayton HamVention is the largest gathering of amateur radio
operators ("hams"). If it's electronic, it will be there!

The Ohio Wing Communications Truck will be on display in flea
market spaces 2232-2234. Please stop by. To get information on
joining CAP, ask one of the members at the display. Working with
CAP can be exciting and rewarding.

If you are a CAP member, please stop by and sign our guest book.
Last year, 75 members from around the country signed in. If
possible, wear your uniform. Please, no fatigues or flight
suits. BlackHawk 85 Mobile will be monitoring 148.15.

Saturday evening, April 25, 6 P.M. to 9 P.M., Ohio Wing will host
a Communications Conference in building 1222 on Wright-Patterson
Air Force Base. Communicators from all wings are invited. Be
sure to bring your membership card to get on the base.
Interested non-members may be allowed to attend; more details
will be available at the HamVention.

HamVention is a registered trademark of the
Dayton Amateur Radio Association, Inc.

-----------------------------------------------------------------

Fidonews Page 20 20 Apr 1987

Todd Looney
Vietnam Veterans Valhalla
INFA Node 143/27

CONVOY TO THE WALL

Plans are well underway and continue for a nationwide convoy
to the Vietnam Veterans Memorial in Washington D.C. All convoys
are scheduled to arrive in D.C. for a July 4th memorial service
at the Wall. According to Bob Castagna, Organizing Chairman of
the Convoy to the Wall, an estimated two million vets and their
families are planning to be there. The following timetable is
reprinted without the permission of Penny Decker, Editor of
Pathfinders EVAC (Effective Vietnam Veterans Action Center),
Klamath, Oregon (but nothing but good can come of its further
distribution to the hundreds of veterans are active in the
International Vietnam Veterans Echomail Conference [yes...it is
now being hosted in Europe!], not to mention the countless vets
who read the Fido Newsletter, so I hope she will forgive me).

For further information, please contact Bob Castagna, VVA Chapter
#179, P.O. Box 823, Medford, Oregon, 97501, or just send a
message to me at Fidonet (tm) node 143/27 in San Jose, California
(I have Seadog running here so you can crash it to me anytime of
the day or night). Make your plans now...the departure date is
less than 4 months away!

CONVOY TO THE WALL
ROUTE AND TIMETABLE

Northern Route
-----------------------------------------------------------------
CITY ARRIVE DEPART HWY/ROUTE

Medford, Or. 6am 6/26 I-5, 44, 395
Reno, Nv. Noon 6/26 2pm 6/26 I-80
Salt Lake City, Ut 2am 6/27 6am 6/27 I-80
Denver, Co. 8pm 6/27 6am 6/28 I-80
Omaha. Neb. 8pm 6/28 6am 6/29 I-80
Chicago, Ill. 4pm 6/29 6am 6/30 I-65, I-70
Pittburgh, Penn. 7pm 6/30 6am 7/1 I-76, I-70, I-81
Winchester, Va. 1pm 7/1
(Staging area until July 4th)
-----------------------------------------------------------------

Central Route
-----------------------------------------------------------------
CITY ARRIVE DEPART HWY/ROUTE
-----------------------------------------------------------------
Los Angeles, Ca. 6am 6/26 I-10, I-15
Gallup. New Mex. 1pm 6/26 3pm 6/26 I-15
Cedar City, Ut. 7pm 6/26 6am 6/27 I-15, I-70
Denver, Colo. 8pm 6/27 6am 6/28 I-70
Kansas City, Kan. 8pm 6/28 6am 6/29 I-70, I-64
Louisville, Ky. 7pm 6/29 6am 6/30 I-64
Charleston, W. Va. 2pm 6/30 6am 7/1 I-79, 40, I-81
Fidonews Page 21 20 Apr 1987

Winchester, Va. 3pm 7/1
(Staging area until July 4th)

Southern Route
-----------------------------------------------------------------
CITY ARRIVE DEPART HWY/ROUTE
-----------------------------------------------------------------
Los Angeles, Ca. 6am 6/26 I-15, I-40
Gallup, New Mex. 9pm 6/26 6am 6/27 I-40
Amarillo, Tx. 4pm 6/27 6am 6/28 I-40
Little Rock, Ark. 7pm 6/28 6am 6/29 I-40
Nashville, Tenn. 5pm 6/29 6am 6/30 I-40, I-81
Roanoke, Va. 5pm 6/30 8am 7/1 I-81
Winchester, Va. 1pm 7/1
(Staging area until July 4th)

My wife Nancy and I plan to take the Central Route (we HATE
I-80!) and will be forming our own convoy departing San Jose, Ca.
at 9am 6/25 and to ariive in Los Angeles, Ca. at 7pm 6/25, Hwy
101, I-5. We will be ready to depart 6/26 at 6am. Hope to see
as many of you there as possible!

-----------------------------------------------------------------

Fidonews Page 22 20 Apr 1987

=================================================================
COLUMNS
=================================================================

Well, here goes another week and I must say that FidoNews is
looking healthier every week. It's nice to know that many of you
out there will spend an hour or two in order to help keep the net
together by writing something for OUR newsletter. Last week I
went over some of the new software for Desktop Publishing, and I
found something else out that makes Ventura Publisher even
better. Ventura Publisher is capable of "printing" to a file.
This way you can print to a file, copy the file to a diskette,
and then bring the disk over to a friend who does have a laser
printer and copy the file to their laser printer. You could also
send the file over the net (or any communications program that
allows straight files to be sent) to be printed. I've tried this
using a friend's Apple LaserWriter and it seems to work out
reasonably well. I've also been busy helping some people in my
local net setup SEAdog (over half of my net is now running
version 4.0). This time around I'll be looking at the new SEAdog
(originally intended for last week but delayed because of
PageMaker and Ventura, sorry Thom) and a database program I found
on a local BBS, Instant Recall.

-- SEAdog 4.0 (System Enhancement Associates, $100) --

While SEAdog is NOT a bulletin board program (it is
primarily an electronic mail system) it can be used with many of
the bulletin board programs currently available. It can be used
to either give the BBS software the capability of electronic mail
(such as TBBS) or to expand the capabilities of electronic mail
(like FIDO). It does this by acting as a "front end" to the
bulletin board, SEAdog answers the phone and if it is a "human"
caller it calls up the bulletin board program. It as found wide
use in the FidoNet community because it uses the same protocol as
FIDO. In addition to being compatible with FIDO (in mail mode) it
expands the net protocol to allow things like file requests and
receipt requests, and since SEAdog answers the call it can accept
mail (or file requests) at anytime.

The new version of SEAdog has quite a few new features that
weren't in the previous version (3.8). The biggest addition is
the SEAlink protocol. When a SEAdog 4.0 calls a SEAdog 4.0 they
now transfer all files using this new protocol and let me tell
you one thing about it, it's FAST. I've already noticed a much
shorter connect time when picking up my echomail and sending in
my column. System Enhancement Associates, the makers of SEAdog,
have also been busy with the new FidoNet Standards Committee
documents in that the previous problems with SEAdog talking with
a FIDO have been cleared up. They've also added much better
support for multiple message areas in their user interface,
making it easier on a sysop to use it for keeping up with his
message areas. Better support for both the modem and the printer
have also been added, along with support for the extended
addressing that is going to affect the net in the near future
(things like echomail, gateways, zones, etc.).
Fidonews Page 23 20 Apr 1987

While this may sound great, some of you are probably saying
"Why should I use SEAdog? What advantages does it really give
me?" Well to start off you can request files from another SEAdog.
If you know your friend Joe (who is running SEAdog) has a new
version of a program that you want, you no longer have to either
ask him to send it to you or log onto his board and download it.
You merely type "GET filename FROM net/node NOW" and you will
soon have the file. This is great convenience on your fellow
sysops as they don't have to spend as much time on requests for
files. The unofficial FIDO utility board now has SEAdog so you
can also get the latest version of your favorite utilities in
next to no time, and at hours you normally wouldn't be awake
during. The new version will also allow people access to the
board during any mail event you wish. This could be used to make
it easier on hubs and hosts, no longer does everything depend on
National Mail Hour. If for some reason a board doesn't reach you
during your mail events, mail could be help continuously for any
board. All they have to do is tell SEAdog to manually poll the
system (and there is a "manual poll" feature in SEAdog). You are
also capable of entering a DOS command anytime the system is
waiting for a call, while this was put into SEAdog to make it
easier to use the GET and SEND commands, I've used it to process
some outbound echomail, update the nodelist, and even call up my
favorite editor. Speaking of echomail, in my local net echomail
is often processed right after the National Mail Hour. SEAdog is
now capable of running an external program after receiving
crashmail (mail that comes in outside of a normal mail event),
and we've been using it to process the echomail (with the
"echomail hubs" sending it out (via "crashmail") as soon as it's
processed.

The user interface goes beyond explaining, but I'll make an
attempt of it anyway. You can call it up by either entering
"MAIL" from the DOS prompt or merely pressing Alt-M when it's
waiting for a call or event. It always starts you out in the
netmail message area, but it is very easy to change message
areas. Up on the top of the screen is the "header" of the
message, who it's from and who it's to, complete with net/node
numbers and board names. To the right of the screen is a list of
options available from the function keys. All you have to do to
change areas is press F8, F9, and then select the area you wish
to change to from a list (up to 17 areas, you create the list in
a file called AREAS.DOG). If you haven't created an AREAS.DOG, or
go over the 17 areas you can enter the drive and pathname of the
area. The message editor is a full screen editor, no more messing
around with line oriented text editors! An added bonus of the
user interface is that you can press ">" to reply to a message,
this will then copy the text of the old message into the new
message with the greater than symbol in front of each line. If
you're reading a lot of echomail areas with the user interface,
you can hide the SEEN-BY lines of the message (or see them, you
can change between the two by a few keystrokes). You also have
the capability to search for text, either in a name or even in
the message! This can be great for looking over an echomail area
for messages dealing with a given topic. This is only a short
list of the features available in the user interface, and let me
Fidonews Page 24 20 Apr 1987

say that it can be very addictive.

Just because it is used primarily by sysops doesn't mean
that you users couldn't benefit from it as well. If a board in
your area is using SEAdog you could have yourself set up as a
private node, then when you want to read the echomail areas just
poll the board and read the messages at your own leisure. If you
need a file from the board, just file request it. Since the new
SEAdog has a minimal script capability, you could even use it
through PC Pursuit to get files (or mail) from bulletin boards
not in your local area. All this makes SEAdog when of the most
worthwhile programs I've ever seen, easily worth the price
($100). If you're a sysop, you should definitely look into
SEAdog. OPUS sysops can realize an even greater advantage as they
would no longer have to call up FIDO to do their mail, their mail
program would be constantly running! Anyone requiring more
information on SEAdog should send a message to Thom Henderson at
107/7, although I'd be glad to try and answer any questions about
the product. You can also look for the SEAdog echomail
conference, Thom keeps up on the conference and answers many
questions there as well. It isn't difficult to setup, and the
manual is well written. SEA (and Thom) get high marks from me on
SEAdog (both 3.8 and the 4.0 update, nice to see people who
listen to their users) and yes, I don't know how I ever got along
without it (which is a response/thanks you may see often in the
SEAdog echo).

-- Instant Recall (Precept, registered version $65.00) --

I've also been busy this past week with Instant Recall,
which is a free form database program. There are two versions of
Instant Recall out there; one is a free version that you will
find on many bulletin boards, while the other is a commercial
product costing $65. The only difference between the two is that
the free version is only capable of handling an 80K database,
while the commercial product can take a database up to 2 meg! A
free form database is not like the databases you are familiar
with if you've ever used something like dBase or Reflex, there
are no neatly structured records composed of fields. Instead
every "record" is made up of several lines of text (over a screen
worth if need be). How do you find anything? Every word in every
record is indexed. If you're looking for your notes on installing
hard drives you merely ask it to find "hard drive" and it will
allow you to look through the records with those words in it.
Since it can be made memory resident, you don't even have to exit
a program to find your notes. You can also give Instant Recall a
"reminder date" when you enter a record. When you start it up on
the given day, you "record" will immediately pop-up, giving you
the reminder. This could be very useful for due dates on reports,
reminders of important meetings (or anniversaries and birthdays,
anyone else ever forget to buy a present or send flowers on
important days like this?), or a things to do today list.

As a test I took one of the smaller echomail areas (I
haven't sent in a check for the full blown version yet, will
probably due it at the end of this week when I get my paycheck
Fidonews Page 25 20 Apr 1987

from work) and wrote a small program in C to get the text of each
message with a unique identifier between each message. I then
told Instant Recall to "import" the message with the identifier
being used to separate records, with this accomplished I started
browsing the messages while looking for specific topics. It
always found the records that were pertinent (I double checked it
afterwards), although it sometimes got records that didn't apply
due to misleading text (like "after I put this on the hard drive
it stopped dialing," while looking for installation tricks on
hard drives). Since you are supposed to be able to cut
information out of an application, I tried to take a table out of
a spreadsheet. The procedure was one of the most painless cut and
paste operations I've ever tried, and worked well to boot! It was
also easy to take part of a record and bring it into my word
processor. If nothing else, it has found a niche to fill in
painlessly merging part of a spreadsheet into a word processor.
I've also been using it to keep notes to myself on things to do
like send out an overdue notice if I haven't received a check,
and comments on programs (kept while running most of them).

Now for a short list of things you can't do with it. It does
not keep "nice, neat structured records" so don't try using it to
keep your accounting records. It isn't capable of printing
reports the way you can with dBase or Reflex, when you print a
record it comes out a several lines of text. This also means you
can't use it to print any type of mailing labels. While this may
seem like a serious deficiency in a database program, I ask you
if dBASE could help me find information in an echomail conference
(without entering every message with keywords). It claims, and
lives up to, being one of the first database programs that works
like your mind, and it accomplishes this very easily in my mind.
Add to this the chance to look at the software first (with the
80K limit) and it's one of the finest programs currently
available and I plan on buying the full blown version in the very
near future (as I mentioned earlier, it's just a matter of
getting my paycheck this week).

-- Winding Down --

The best book I've come across this past week is "The Soul
of a New Machine" by Tracy Kidder (Avon books, $3.95 paperback).
It's a lot like "Hackers" in that it looks at the people involved
in computers rather than dealing with the computers/software/etc.
It was a 1982 Pulitzer Prize winner, and covers the development
of Data General's first 32 bit super minicomputer. It came highly
recommended to me, and I'd like this chance to highly recommend
it you as well.

As far as games go, I have a confession to make. I bought a
copy of "Top Gun" on videotape and been watching it too much. As
a result, I've spent a lot of time this past week playing JET
from subLogic (list price $49.95). It got so bad, I even went out
and bought a joystick to attach up (makes it a lot easier) and
have since been able to land on the carrier deck much easier. My
"flying" has also improved as I've been able to bring down as
many as 23 enemy fighters in one game (my old high was 12). If
Fidonews Page 26 20 Apr 1987

you are looking for a flight simulator, but don't feel like going
from airport to airport look into JET as it is much more like
flying a combat aircraft than Microsoft's Flight Simulator.

That's about it for this week. Thanks go to the anonymous
person who sent me the message on USENET about EMACS, but I'm
sure I've seen it ported to the PC somewhere. If you're a user of
a BBS and are sending me netmail, please mention to your sysop
that mail to me must be routed through either 157/0, 157/1, or
157/502. Sysop's who wish to contact me through FidoNet, just
take note of the last sentence. I'll try to reply to all the
messages I receive. The nodes that will forward mail to me are
all running SEAdog, so you shouldn't have to worry about mail
schedules too much. They will also forward a file to me, if you
think I might be interested in something you've found. If you
send me something through US Mail, please tell me where to send a
reply, be it a usenet site name, FidoNet net/node number, or home
address. If you've got a favorite program (application, language,
game, anything at all) drop me a line and I'll try to take a look
at it (money permitting for stuff I can't download off a local
board) so everyone out there can know about a good program or
book. No solid ideas on what I'll be writing about next week, but
I did just get Microsoft's Macro Assembler. In the meantime, I
really do want to hear from you.

Dale Lovell
3266 Vezber Drive
Seven Hills, OH 44131

FidoNet: 157/504
uucp: ..!ncoast!lovell

-----------------------------------------------------------------

Fidonews Page 27 20 Apr 1987

=================================================================
WANTED
=================================================================

Eric Ewanco
SEAdog/Opus 130/3
7633 Beckwood
Fort Worth Texas 76112-6051

I'm curious if there are any people out there going to
attend the Harvard Summer School program this summer, from June
29 to August 21. If so, I'd love to get in touch with you, I'm
going this summer. Please send me a Fidonet message; if you're a
user, make arrangements with your Sysop to send it, or send a
letter via USPS to the above address. Thanks,

Eric

-----------------------------------------------------------------

Fidonews Page 28 20 Apr 1987

=================================================================
FOR SALE
=================================================================

MAGAZINE ON DISK FOR IBM PC AND COMPATIBLES

BIG BLUE DISK, the magazine on disk for the IBM PC and
compatibles, is currently available at Waldenbooks stores and
many other retail locations, as well as by mail subscription.
It is contained entirely on a floppy disk. Each issue contains
programs, articles, feedback from subscribers, and more.

For example, issue 7, on sale soon, contains 2 disks full of
features, including:

- STREETS AND ALLEYS: A computerized solitare game with a
realistic shuffle.

- TAKING STOCK: This quiz tests your stock market knowledge.

- MEMO WRITER: This simple word processor automatically places
your input in memo format.

- PC-FILE III (The Blue Plate Special): Big Blue Disk is proud
to present ButtonWare's full-featured database -- a completely
functional program, not a demo.

- ALFREDO'S LOST CAUSE: Join our ill-fated animated hero on his
first Big Blue Disk adventure.

- THE PAGE COMMAND: Another Kramden Utility; a tool for adding
page headers to printed files.

In addition, there are other programs, articles, and regular
features, including feedback from our readers.

You can order this issue by direct mail by sending $9.95 (check,
money order, or Visa/Mastercard/American Express accepted) to:
BIG BLUE DISK, DEPT F2, PO BOX 30008, SHREVEPORT, LA 71130-0008.

Mail subscriptions are also available: One year (12 monthly
issues) costs only $69.95. (A 41% savings over newsstand
price.) A six-month subscription is available for $39.95.

Lots of interesting stuff is coming up; issue 8 contains several
educational features: a Biology 101 quiz, a quiz maker for
teachers, and an adventure game that teaches South American
geography. Subscribe now and don't miss anything!

BIG BLUE DISK requires an IBM PC or compatible, with at least
256K and MS-DOS 2.0 or later. Color graphics is recommended.

Send questions/comments to Daniel Tobias on FIDO 380/2.

-----------------------------------------------------------------

Fidonews Page 29 20 Apr 1987

=================================================================
NOTICES
=================================================================

The Interrupt Stack

25 Apr 1987
The Next Occasional MetroNet Sysop Meeting, to be held at the
SEA office in Clifton NJ. Spouses and POSSLQs welcome.
Contact Irene Henderson at 107/9 for details and directions.

27 Apr 1987
Start of the Semi-Annual DECUS (Digital Equipment Corp. Users
Society) symposium, to be held in Nashville, Tennessee.

24 May 1987
Metro-Fire Fido's Second Birthday BlowOut and Floppy Disk
Throwing Tournament! All Fido Sysops and Families Invited!
Contact Christopher Baker at 135/14 for more information.
SEAdogs may GET more information by requesting FPICMAP.ARC
from 135/14.

21 Aug 1987
Start of the Fourth International FidoNet Conference, to be
held at the Radisson Mark Plaza Hotel in Alexandria, VA.
Contact Brian Hughs at 109/634 for more information. This is
FidoNet's big annual get-together, and is your chance to meet
all the people you've been talking with all this time. We're
hoping to see you there!

24 Aug 1989
Voyager 2 passes Neptune.

If you have something which you would like to see on this
calendar, please send a message to FidoNet node 1/1.

-----------------------------------------------------------------

W A N T E D
-----------

Additional FidoNet node needed to be West Coast Star for
the following EchoMail Conferences : SFFAN, GAMING,
INTERPER, MUSIC and BUSINESS. Should be willing to make
one long-distance call per night.

Contact Mike J at 150/900 or Randy Kobetich at 150/130.

-----------------------------------------------------------------

Fidonews Page 30 20 Apr 1987

Bob Morris 141/333
Chairman, Elections and Nominations Committee

The next two pages are your Official ballot for the Election of
the IFNA Board of Directors. The following are the few rules
which must prevail in this election:

1. You must send a legible copy of this ballot to the address
listed on the ballot. It must be signed and bear your
net/node number.

2. You may vote for any one person in your region for the
position of Regional Director. This vote is to be cast in the
LEFT column of the ballot.

3. You may vote for any ten people in any regions for the
position of Director at Large. These votes are to be cast in
the RIGHT column of the ballot.

4. Voting will continue from the date of your receipt of this
ballot until the end of registration at the Conference in
August. The results will be read during the opening of the
business meeting on the first day of the conference.

5. Write-in Votes will be accepted and are requested during this
election.

Fidonews Page 31 20 Apr 1987

IFNA Board Of Directors
Ballot

Regional At Large
Region 10:
Steve Jorden _________ ________

Region 11:
Ryugen Fisher _________ ________
Theodore Polczynski _________ ________

Region 12:

Region 13:
Don Daniels _________ ________
John Penberthy _________ ________
Thom Henderson _________ ________
Gee Wong _________ ________
Brian Hughes _________ ________

Region 14:
Ben Baker _________ ________
Ken Kaplan _________ ________
Brad Hicks _________ ________

Region 15:
David Dodell _________ ________
Larry Wall _________ ________

Region 16:
Bob Hartman _________ ________
Hal Duprie _________ ________

Region 17:
Rob Barker _________ ________
Randy Bush _________ ________
Bob Swift _________ ________

Region 18:
Ken Shackelford _________ ________
Wes Crowley _________ ________

Region 19:
Mark Grennan _________ ________
Wynn Wagner _________ ________

Region 2:
Henk Wevers _________ ________

Write-in candidates:
___________________ _________ ________
___________________ _________ ________

Fidonews Page 32 20 Apr 1987

Name ______________________________ Net/Node ___________

Signature______________________________ Date ___________

Please complete this and mail it to:

Robert Morris
IFNA Elections Committee
210 Church Street
West Haven, Ct. 06516

or bring it with you when you come to the conference in August.

These ballots will be counted by myself since with 200 members
the charges for a CPA would be very high. Hard copies will be
made available to anyone wishing to insure that their vote was
included.

Thank You

Bob Morris
Elections and Nominations Committee

-----------------------------------------------------------------