Network Working Group D.L. Mills
Request for Comments: 1004 University of Delaware
April 1987
A Distributed-Protocol Authentication Scheme
Status of this Memo
The purpose of this RFC is to focus discussion on authentication
problems in the Internet and possible methods of solution. The
proposed solutions this document are not intended as standards for
the Internet at this time. Rather, it is hoped that a general
consensus will emerge as to the appropriate solution to
authentication problems, leading eventually to the adoption of
standards. Distribution of this memo is unlimited.
1. Introduction and Overview
This document suggests mediated access-control and authentication
procedures suitable for those cases when an association is to be set
up between multiple users belonging to different trust environments,
but running distributed protocols like the existing Exterior Gateway
Protocol (EGP) [2], proposed Dissimilar Gateway Protocol (DGP) [3]
and similar protocols. The proposed prcedures are evolved from those
described by Needham and Shroeder [5], but specialized to the
distributed, multiple-user model typical of these protocols.
The trust model and threat environment are identical to that used by
Kent and others [1]. An association is defined as the end-to-end
network path between two users, where the users themselves are
secured, but the path between them is not. The network may drop,
duplicate or deliver messages with errors. In addition, it is
possible that a hostile user (host or gateway) might intercept,
modify and retransmit messages. An association is similar to the
traditional connection, but without the usual connection requirements
for error-free delivery. The users of the association are sometimes
called associates.
The proposed procedures require each association to be assigned a
random session key, which is provided by an authentication server
called the Cookie Jar. The procedures are designed to permit only
those associations sanctioned by the Cookie Jar while operating over
arbitrary network topologies, including non-secured networks and
broadcast-media networks, and in the presence of hostile attackers.
However, it is not the intent of these procedures to hide the data
Mills [Page 1]
RFC 1004 April 1987
(except for private keys) transmitted via these networks, but only to
authenticate messages to avoid spoofing and replay attacks.
The procedures are intended for distributed systems where each user i
runs a common protocol automaton using private state variables for
each of possibly several associations simultaneously, one for each
user j. An association is initiated by interrogating the Cookie Jar
for a one-time key K(i,j), which is used to encrypt the checksum
which authenticates messages exchanged between the users. The
initiator then communicates the key to its associate as part of a
connection establishment procedure such as described in [3].
The information being exchanged in this protocol model is largely
intended to converge a distributed data base to specified (as far as
practical) contents, and does not ordinarily require a reliable
distribution of event occurances, other than to speed the convergence
process. Thus, the model is intrinsically resistant to message loss
or duplication. Where important, sequence numbers are used to reduce
the impact of message reordering. The model assumes that associations
between peers, once having been sanctioned, are maintained
indefinitely. The exception when an association is broken may be due
to a crash, loss of connectivity or administrative action such as
reconfiguration or rekeying. Finally, the rate of information
exchange is specifically designed to be much less than the nominal
capabilities of the network, in order to keep overheads low.
2. Procedures
Each user i is assigned a public address A(i) and private key K(i) by
an out-of-band procedure beyond the scope of this discussion. The
address can take many forms: an autonomous system identifier [2], an
Internet address [6] or simply an arbitrary name. However, no matter
what form it takes, every message is presumed to carry both the
sender and receiver addresses in its header. Each address and its
access-control list is presumed available in a public directory
accessable to all users, but the private key is known only to the
user and Cookie Jar and is not disclosed in messages exchanged
between users or between users and the Cookie Jar.
An association between i and j is identified by the bitstring
consisting of the catenation of the addresses A(i) and A(j), together
with a one-time key K(i,j), in the form [A(i),A(j),K(i,j)]. Note that
the reciprocal association [A(j),A(i),K(j,i)] is distinguished only
by which associate calls the Cookie Jar first. It is the intent in
the protocol model that all state variables and keys relevant to a
previous association be erased when a new association is initiated
and no caching (as suggested in [5]) is allowed.
Mills [Page 2]
RFC 1004 April 1987
The one-time key K(i,j) is generated by the Cookie Jar upon receipt
of a request from user i to associate with user j. The Cookie Jar has
access to a private table of entries in the form [A(i),K(i)], where i
ranges over the set of sanctioned users. The public directory
includes for each A(i) a list L(i) = {j1, j2, ...} of permitted
associates for i, which can be updated only by the Cookie Jar. The
Cookie Jar first checks that the requested user j is in L(i), then
rolls a random number for K(i,j) and returns this to the requestor,
which saves it and passes it along to its associate during the
connection establishment procedure.
In the diagrams that follow all fields not specifically mentioned are
unencrypted. While the natural implementation would include the
address fields of the message header in the checksum, this raises
significant difficulties, since they may be necessary to determine
the route through the network itself. As will be evident below, even
if a perpetrator could successfully tamper with the address fields in
order to cause messages to be misdelivered, the result would not be a
useful association.
The checksum field is computed by a algorithm using all the bits in
the message including the address fields in the message header, then
is ordinarily encrypted along with the sequence-number field by an
appropriate algorithm using the specified key, so that the intended
receiver is assured only the intended sender could have generated it.
In the Internet system, the natural choice for checksum is the 16-
bit, ones-complement algorithm [6], while the natural choice for
encryption is the DES algorithm [4] (see the discussion following for
further consideration on these points). The detailed procedures are
as follows:
1. The requestor i rolls a random message ID I and sends it and
the association specifier [A(i),A(j)] as a request to the Cookie
Jar. The message header includes the addresses [A(i),A(C)], where
A(C) is the address of the Cookie Jar. The following schematic
illustrates the result:
2. The Cookie Jar checks the access list to determine if the
association [A(i),A(j)] is valid. If so, it rolls a random number
K(i,j) and constructs the reply below. It checksums the message,
Mills [Page 3]
RFC 1004 April 1987
encrypts the j cookie field with K(j), then encrypts it and the
other fields indicated with K(i) and finally sends the reply:
3. Upon receipt of the reply the requestor i decrypts the
indicated fields, saves the (encrypted) j cookie field and copies
the i cookie field to the j cookie field, so that both cookie
fields are now the original K(i,j) provided by the Cookie Jar.
Then it verifies the checksum and matches the message ID with its
list of outstanding requests, retaining K(i,j) for its own use. It
then rolls a random number X for the j cookie field (to confuse
wiretappers) and another I' for the (initial) message ID, then
recomputes the checksum. Finally, it inserts the saved j cookie
field in the i cookie field, encrypts the message ID fields with
K(i,j) and sends the following message to its associate:
4. Upon receipt of the above message the associate j decrypts the
i cookie field, uses it to decrypt the message ID fields and
verifies the checksum, retaining the I' and K(i,j) for later use.
Finally, it rolls a random number J' as its own initial message
ID, inserts it and the checksum in the confirm message, encrypts
the message ID fields with K(i,j) and sends the message:
5. Subsequent messages are all coded in the same way. As new data
are generated the message ID is incremented, a new checksum
computed and the message ID fields encrypted with K(i,j). The
receiver decrypts the message ID fields with K(i,j) and discards
the message in case of incorrect checksum or sequence number.
3. Discussion
Since the access lists are considered public read-only, there is no
need to validate Cookie Jar requests. A perpetrator might intercept,
modify and replay portions of Cookie Jar replies or subsequent
messages exchanged between the associates. However, presuming the
perpetrator does not know the keys involved, tampered messages would
fail the checksum test and be discarded.
The "natural" selection of Internet checksum algorithm and DES
encryption should be reconsidered. The Internet checksum has several
well-known vulnerabilities, including invariance to word order and
byte swap. In addition, the checksum field itself is only sixteen
bits wide, so a determined perpetrator might be able to discover the
key simply by examining all possible permutations of the checksum
field. However, the procedures proposed herein are not intended to
compensate for weaknesses of the checksum algorithm, since this
vulnerability exists whether authentication is used or not. Also note
that the encrypted fields include the sequence number as well as the
checksum. In EGP and the proposed DGP the sequence number is a
sixteen-bit quantity and increments for each successive message,
which makes tampering even more difficult.
In the intended application to EGP, DGP and similar protocols
associations may have an indefinite lifetime, although messages may
be sent between associates on a relatively infrequent basis.
Therefore, every association should be rekeyed occasionally, which
can be done by either associate simply by sending a new request to
the Cookie Jar and following the above procedure. To protect against
stockpiling private user keys, each user should be rekeyed
occasionally, which is equivalent to changing passwords. The
mechanisms for doing this are beyond the scope of this proposal.
It is a feature of this scheme that the private user keys are not
disclosed, except to the Cookie Jar. This is why two cookies are
used, one for i, which only it can decrypt, and the other for j,
decrypted first by i and then by j, which only then is valid. An
interceptor posing as i and playing back the Cookie Jar reply to j
will be caught, since the message will fail the checksum test. A
perpetrator with access to both the Cookie Jar reply to i and the
subsequent message to j will see essentially a random permutation of
Mills [Page 5]
RFC 1004 April 1987
all fields. In all except the first message to the Cookie Jar, the
checksum field is encrypted, which makes it difficult to recover the
original contents of the cookie fields before encryption by
exploiting the properties of the checksum algorithm itself.
The fact that the addresses in the message headers are included in
the checksum protects against playbacks with modified addresses.
However, it may still be possible to destabilize an association by
playing back unmodified messages from prior associations. There are
several possibilities:
1. Replays of the Cookie Jar messages 1 and 2 are unlikely to
cause damage, since the requestor matches both the addresses and
once-only sequence number with its list of pending requests.
2. Replays of message 3 may cause user j to falsely assume a new
association. User j will return message 4 encrypted with the
assumed session key, which might be an old one or even a currently
valid one, but with invalid sequence number. Either way, user i
will ignore message 4.
3. Replays of message 4 or subsequent messages are unlikely to
cause damage, since the sequence check will eliminate them.
The second point above represents an issue of legitimate concern,
since a determined attacker may stockpile message 3 interceptions and
replay them at speed. While the attack is unlikely to succeed in
establishing a working association, it might produce frequent
timeouts and result in denial of service. In the Needham-Shroeder
scheme this problem is avoided by requiring an additional challenge
involving a message sent by user j and a reply sent by user i, which
amounts to a three-way handshake.
However, even if a three-way handshake were used, the additional
protocol overhead induced by a determined attacker may still result
in denial of service; moreover, the protocol model is inherently
resistant to poor network performance, which has the same performance
signature as the attacker. The conclusion is that the additional
expense and overhead of a three-way handshake is unjustified.
4. Application to EGP and DGP
This scheme can be incorporated in the Exterior Gateway Protocol
(EGP) [2] and Dissimilar Gateway Protocol (DGP) [3] models by adding
the fields above to the Request and Confirm messages in a
straightforward way. An example of how this might be done is given in
[3]. In order to retain the correctness of the state machine, it is
Mills [Page 6]
RFC 1004 April 1987
convenient to treat the Cookie Jar reply as a Start event, with the
understanding that the Cookie Jar request represents an extrinsic
event which evokes that response.
The neighbor-acquisition strategy intended in the Dissimilar Gateway
Protocol DGP follows the strategy in EGP. The stability of the EGP
state machine, used with minor modifications by DGP, was verified by
state simulation and discussed in an appendix to [2]. Either
associate can send a Request command at any time, which causes both
the sender and the receiver to reinitialize all state information and
send a Confirm response. In DGP the Request operation involves the
Cookie Jar transaction (messages 1 and 2) and then the Request
command itself (message 3). In DGP the keys are reinitialized as well
and each retransmission of a Request command is separately
authenticated.
In DGP the Request command (message 3) and all subsequent message
exchanges assume the keys provided by the Cookie Jar. Use of any
other keys results in checksum discrepancies and discarded messages.
Thus the sender knows its command has been effected, at least at the
time the response was sent. If either associate lost its state
variables after that time, it would ignore subsequent messages and it
(or its associate) would eventually time out and reinitiate the whole
procedure.
If both associates attempt to authenticate at the same time, they may
wind up with the authentication sequences crossing in the network.
Note that the Request message is self-authenticating, so that if a
Request command is received by an associate before the Confirm
response to an earlier Request command sent by that associate, the
keys would be reset. Thus when the subsequent Confirm response does
arrive, it will be disregarded and the Request command resent
following timeout. The race that results can only be broken when, due
to staggered timeouts, the sequences do not cross in the network.
This is a little more complicated than EGP and does imply that more
attention must be paid to the timeouts.
A reliable dis-association is a slippery concept, as example TCP and
its closing sequences. However, the protocol model here is much less
demanding. The usual way an EGP association is dissolved is when one
associate sends a Cease command to the other, which then sends a
Cease-ack response; however, this is specifically assumed a non-
reliable transaction, with timeouts specified to break retry loops.
In any case, a new Request command will erase all history and result
in a new association as described above.
Other than the above, the only way to reliably dis-associate is by
timeout. In this protocol model the associates engage in a
Mills [Page 7]
RFC 1004 April 1987
reachability protocol, which requires each to send a message to the
other from time to time. Each associate individually times out after
a period when no messages are heard from the other.
5. Acknowledgments
Dan Nessett and Phil Karn both provided valuable ideas and comments
on early drafts of this report. Steve Kent and Dennis Perry both
provided valuable advice on its review strategy.
6. References
[1] Kent, S.T., "Encryption-Based Protection for Interactive
User/Computer Communication", Proc. Fifth Data Communications
Symposium, September 1977.
[2] Mills, D.L., "Exterior Gateway Protocol Formal Specification",
DARPA Network Working Group Report RFC-904, M/A-COM Linkabit,
April 1984.
[3] Mills, D.L., "Dissimilar Gateway Protocol Draft Specification",
in preparation, University of Delaware.
[4] National Bureau of Standards, "Data Encryption Standard",
Federal Information Processing Standards Publication 46, January
1977.
[5] Needham, R.M., and M.D. Schroeder, "Using Encryption for
Authentication in Large Networks of Computers", Communications
of the ACM, Vol. 21, No. 12, pp. 993-999, December 1978.
[6] Postel, J., "Internet Protocol", DARPA Network Working Group
Report RFC-791, USC Information Sciences Institute, September
1981.
