/*
       The BDS C Standard I/O header file --  v1.45    11/12/81

       This file contains global definitions, for use in all C programs
       in PLACE of (yechhh) CONSTANTS. Characteristics of your system such
       as video screen size, interface port numbers and masks, buffered I/O
       allocations, etc., should all be configured just once within this
       file. Any program which needs them should contain the preprocessor
       directive:

               #include "bdscio.h"

       near the beginning.
       Go through and set all this stuff as soon as you get the package,
       and most terminal-dependent sample programs should run much better.
*/


/*
       Some console (video) terminal characteristics:
       (pre-configured for H19/Z19/H89/Z89)
*/

#define TWIDTH  80      /* # of columns */
#define TLENGTH 24      /* # of lines   */
#define CLEARS  "\033E" /* String to clear screen on console    */
#define INTOREV "\033p" /* String to switch console into reverse video  */
#define OUTAREV "\033q" /* String to switch console OUT of reverse video  */
#define CURSOROFF "\033x5"      /* String to turn cursor off    */
#define CURSORON "\033y5"       /* String to turn cursor on     */
#define ESC     '\033'  /* Standard ASCII 'escape' character    */

/*
       Console serial port characteristics:
*/

#define CSTAT   0355    /* status port  */
#define CDATA   0350    /* data port    */
#define CIMASK  0x01    /* input data ready mask   */
#define COMASK  0x20    /* output data ready mask  */
#define CAHI    1       /* True if status active high   */
#define CRESET  0       /* True if status port needs to be reset after input */
#define CRESETVAL 0     /* If CRESET is true, this is the value to send */

/*
        Modem characteristics:
*/

#define MSTAT   0335    /* status port  */
#define MDATA   0330    /* data port    */
#define MIMASK  0x01    /* input data ready mask        */
#define MOMASK  0x20    /* ready to send a character mask       */
#define MAHI    1       /* True if status logic active high  */
#define MRESET  0       /* True if status port needs to be reset */
#define MRESETVAL 0     /* If MRESET true, this is the byte to send */

/*
       General purpose Symbolic constants:
*/

#define BASE 0          /* Base of CP/M system RAM (0 or 0x4200)  */
#define NULL 0
#define EOF -1          /* Physical EOF returned by low level I/O functions */
#define ERROR -1        /* General "on error" return value */
#define OK 0            /* General purpose "no error" return value */
#define JBUFSIZE 6      /* Length of setjump/longjump buffer    */
#define CPMEOF 0x1a     /* CP/M End-of-text-file marker (sometimes!)  */
#define SECSIZ 128      /* Sector size for CP/M read/write calls */
#define MAXLINE 135     /* Longest line of input expected from the console */
#define TRUE 1          /* general purpose true truth value     */
#define FALSE 0         /* general purpose false truth value    */

/*
  The NSECTS symbol controls the compilation of the buffered
  I/O routines within STDLIB2.C, allowing each user to set the
  buffer size most convenient for his system, while keeping
  the numbers totally invisible to the C source programs using
  buffered I/O (via the BUFSIZ defined symbol.) For larger
  NSECTS, the disk I/O is faster...but more ram is taken up.
  Note that pre-1.4 versions of the library functions
  were not set up to support this customizable buffer size,
  and always compiled as if NSECTS were 1 in this version. To
  change the buffer size allocation, follow these steps:

    1) Alter NSECTS to the desired value here in bdscio.h
    2) Re-compile STDLIB1.C and STDLIB2.C
    3) Use CLIB to combine STDLIB1.CRL and STDLIB2.CRL to make
       a new DEFF.CRL.

  Make sure you use declare all your I/O buffers with the a
  statement such as:
               char buf_name[BUFSIZ];
        instead of the older and now obsolete:
               char buf_name[134];
       (and always #include "bdscio.h" in your programs!)
*/

#define NSECTS 8        /* Number of sectors to buffer up in ram */

#define BUFSIZ (NSECTS * SECSIZ + 6 )   /* Don't touch this */

struct _buf {                           /* Or this...       */
       int _fd;
       int _nleft;
       char *_nextp;
       char _buff[NSECTS * SECSIZ];
};



/*
       If you plan to use the high-level storage allocation functions
       from the library ("alloc" and "free") then:

         1) Uncomment (enable) the "ALLOC_ON" definition, and comment out the
            "ALLOC_OFF" definition from this file.

         2) Re-compile STDLIB1.C, and use CLIB to transfer "alloc"
            and "free" into the DEFF.CRL library file.

         3) THIS IS IMPORTANT!!! Include the statement:

               _allocp = NULL;    /* initialize allocation pointer */

            somewhere in your "main" function PRIOR to the first use
            of the "alloc" function. DON'T FORGET THIS INITIALIZATION!!

       Remember to include bdscio.h in ALL files of your C program.

       The lack of static variables is the reason for all this messiness.
*/

#define ALLOC_OFF 1     /* disables storage allocation if uncommented */

                       /* only ONE of these two lines should be uncommented */
/*
#define ALLOC_ON 1      /* enables storgage allocation if uncommented */
*/


#ifdef ALLOC_ON                 /* if storage allocation enabled, */

struct _header  {
       struct _header *_ptr;
       unsigned _size;
};

struct _header _base;           /* declare this external data to  */
struct _header *_allocp;        /* be used by alloc() and free()  */

#endif

You are viewing proxied material from gopher.floodgap.com. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.