INSTAL CMD 1 624-045-022-120 Command file loads files into
proper accounts.
APU IDV 7 450-135-403-617 Rev 1.0(108) APU interface
driver - [1,6]
APUHDR IDV 7 366-166-520-307 1.0(109) Rev 1.0(109) APU driver
w/header for 1.0D or later
APUOLD IDV 7 770-257-127-550 Rev 1.0(101) APU16 interface
driver - [1,6]
APU ASD 1 661-747-020-174 Rev 1.0(101) for use with
AUTOLOG - [7,0]
SETAPU LIT 2 245-776-134-076 1.0(101) Use with APU.IDV Rev 1.1 -
- copy to 1,4.
BARBER LIT 4 056-064-230-030 Creates serial output for
testing copy to 1,4.
APUTST INI 2 312-106-455-665 Test INI for APU16
- copy to 1,4.
APUTST CMD 1 413-537-340-152 Forces BARBER to APU16 ports
- copy to 2,2.
READ ME 2 This file.
SPEED LIT 2 635-551-510-233 1.0(109) Like BAUD.LIT but better
- copy to 1,4
SLAVE LIT 15 043-416-661-701 2.1(32)-1 Allows AUTOLOG users to
send/rec - copy to 1,4
APU HLP 3 Help file for APU
installation
APU DIR for use with "verify"
If you encounter problems at TRMDEF time, be sure you are using
an up-to-date version of TRMDEF.LIT. Use Rev 1.1(121) or later.
============================================================================
NOTE ON ENHANCED MODE:
To turn on enhanced mode (used only when APU'S are not mixed on the cable
with AM-355's,AM-338's or AM-324's) place the following statement in the .INI
after the SYSTEM command:
