Brian Lara International Cricket (AKA Ricky Ponting International Cricket)
Bowling and Batting Guide
***LEGAL DISCLAIMER***
You may not use any part of this walkthrough for any use to gain profit from or
mass distribution through printed media. If this rule is broken then copyright
has been breeched and you must pay the writer royalties equal to 100% of the
profit gained or unless copyright liscence has been provided by the writer.
This walkthrough is free for distribution over the internet via GameFAQ's
website only and any unauthorised posting on forums, external websites,
personal websites etc. is strictly prohibited.
Table of Contents
1.0 Bowling Types
1.1 Bowling Techniques - Spin
1.2 Bowling Techniques - Swing
1.3 Bowling Techniques - Pace
2.0 Batting Types
2.1 Batting Orders
2.2 Batting Techniques - Openers
2.3 Batting Techniques - Middle Order
2.4 Batting Techniques - Tail Enders
3.0 Contact Information
1.0 Bowling Types
In BLIC (RPIC) there are three major types of bowling styles. These are Spin,
Swing and Pace. The techniques for each vary significantly and if used well
can also be combined. This walkthrough was originally written to help people
with figuring out how to beat a batsmen properly without having to rely on
luck.
One thing about any cricket game, whether in real life or virtual, is the
limit of overs in ODI's. These are usually set to 50 or less overs. When the
openers walk out in a 50 overs game, they walk out with the mentality of
staying in the middle for as long as possible. So taking catches from slog
shots is less likely to occur at the start of any innings. But as the innings
progresses, The batsmen will becomemore aware of the "middle" of the innings
and start playing more attacking cricket. This means they will start to run
more and try to reach the top of their confidence meter to better their shot
selection and timing. the higher the batsmans confidence, the better the
shots he plays. This is why it is imperative to keep the batsmen from
blocking as much as possible and get them to play shots while their
confidence is low. the lower it is the riskier the shots, the slower they
become, their timing becomes eratic and they can't play as wide in the crease
as usual.
When it come to opening batsmen, the best types of bowlers are Fast to
medium-fast bowling types to deliver quicker balls with less time to judge
upon. For middle order batsmen, a medium pace or spinning bowler is ideal.
Middle order batsmen find fast paced balls easier to glance or drive and will
play better shots from pace. Spinners slow the attack down and with more air
time, they are harder to time well. Medium pacers have the same token as they
have more air time aswell. For tail enders, A fast paced to medium paced
bowler with a high level of control (this makes swing movement in the air
much wider) is ideal for swinging balls into their wickets, likely making
them play late and making bad shot selections as their reach is much lower
then that of an opening batsman. Varied selection of deliveries to any
batsman is essential.
1.1 Spinning Techniques
the ablity of a slow paced bowler to spin the ball off the pitch is an
exciting and necessary part of any game. The batsmen not only has to judge
where the ball is going to land on the pitch but also has to judge the
movement of the ball in the air, off the pitch and the speed of the
delivery. The best combintions for spin bowling are as follows:
Legspin bowling to a left handed middle order batsman
Offspin bowling to a right handed middle order batsman
Legspin bowling to a right handed Tailender
Offspin bowling to a left handed tailender
The reason they are reversed for Middle order and tailenders is because tail
enders cannot judge a ball for their life and a ball spinning from behind the
line of their legstump coming into their wicket will cause them to become
jumpy and make them try to play down legside. This means that any misjudgement
will result in a wicket.
The other way to play to a difficult tailender is to place a few on legside
and then place on armball (straight ball) on the line of middle stump.
The same works for Middle order batsmen. They get used to having balls
spinning into their bat and to have one placed more towards their legside
will cause them to try playing a risky legside shot and if placed correctly
with a low enough batsman confidence, will cause them to mistime the ball and
miss it completely.
1.2 Swinging Techniques
The ability to swing relies solely on any bowlers level of control which
can be checkad at anytime by going into the bowling statistics or bowler
selection screen and pressing the more button to see their stats. This
will show the level of control available to the bowler and the higher the
level of control, the wider the swing will be.
Swing bowling is comparitively easy compared to the other types of bowling
and Only needs to be placed close to the wicket but slightly wide and the
swung in towards or out away from the batsman. Either ball is equally
damaging if done correctly will hit the batsmans pads or his wicket. If lbw
is not given then the batsmans confidence level will drop considerably,
especially if the team appeals to the umpire for lbw. The lower the batsmans
confidence the less likely he will be able to judge the amount of swing.
1.3 Pacemen Techniques
The ability to bowl fast paced and accurately is essential when opening the
bowling attack as the faster the ball is, the harder it is to judge the
timing and the more likely they are to block. This is where swinging comes
in handy with pace bowling. If you bowl fast paced slighly outside the line
of offstump and then swing the ball away from the batsman, he will likely
not reach the ball and the blocking opportunity. This will cause his
confidence to drop. If done correctly, you can do this a few times and then
swing the ball back into the batsman and he will most likely miss the shot
and will lose his wicket. Other very helpful ball selections are shots such
as in cutters and out cutters where the swing on the ball is opposite to the
way the ball will seam off the pitch. This is useful to lowering the
awareness of the balls trajectory and makes and edge to the keeper or a
mistimed left shot likely.
I hope this bowling guide helps you significantly in aiding your bowling
attack and bowler selection. If you have found any othe helpful deliveries
then please email me with these and i will add them to the guide with a
reference to you.
Thankyou.
2.0 Batting Types
Batting types are very easy to judge but i thought a guide to help you
make a good batting lineup and increase playabilty for people who lack
the knowledge of the game to do this adequately. There are three typed of
batters. Opening batsmen, Middle order batsmen and Tailenders.
2.1 Batting orders
Openers are best for pacers and have a high level of skill against pace
bowlers and any other bowler in general, and have very high legside and
offside skill. They also must have a very high abilty in defense. These
batsmen are in the opening spots at 1 and 2
Middle order batsmen are best at between positions 3-8 on the batting
order. These should have high skill against swing, spin and pace and have
a moderate to high skill in legside and offside play. they dont need such
a high skill with defense because they are better at playing at the ball
rather than blocking.
Tailenders are just plain old bad at batting and may have between a rating
of 5-30 and take up spots 9, 10 and 11.
2.2 Openers Techniques
When opening the batting there are three things to look out for. Defense
when the ball is places at your feet infront of the stumps, cuts, drives
and glances when the ball is placed wide of the stumps on either side and
at a medium length on the pitch. The last thing to look for is the no ball.
These can be slogged without a second look because you cannot be bowled or
caught out when playing these, but you can be run out so try not to take
too many runs on these.
2.3 Middle order batsmen
You need not look too far on these guys, high level of skill, good timing
and great confidence. Theyre ability to slog on the offside and legside is
unparalleled. use these batsmen to hit short pitched balls out of the
ground but only through the fielding gaps and any full pitched balls
glanced away for a four on the legside or offside. use the block to build
up confidence only. try to play plenty of shots and you will get a higher
score than a defensive innings.
2.4 Tailenders
These are the hardest to bat with because their timing is bad and their
coordination is even worse. You must place the directly in front of the
ball placemarker and even then they have a high likelihood of edging the
ball and missing it completely. another drawback of tailenders is they
are highly likely to get out by lbw because of their placement directly
in front of the ball. be careful and try to bat defensively with
tailenders and glance your shots down legside. This is the easiestshot
to play with a tailender and has a higher success rate of making runs
than a drive or a slog shot.
3.0 Contact me
If you wish to have something added here or would like to use this
walkthrough then please contact me and let me know at
[email protected]
