 |
Return Create A Forum - Home |
 |
--------------------------------------------------------- |
|
Suzuki Quadracer HQ |
 |
https://suzukiquadracerhq.createaforum.com |
|
--------------------------------------------------------- |
|
***************************************************** |
|
Return to: LTZ400 / LTZ250 / LT230 - Engine |
|
***************************************************** |
|
#Post#: 4958-------------------------------------------------- |
|
Head Gasket? |
|
By: 88 zilla Date: November 29, 2012, 4:49 pm |
|
--------------------------------------------------------- |
|
Hey there! I have a 2003 z400,put a namura 94mm kit on it last |
|
winter with new factory valves,new valve seals,new hot cams |
|
stage 1 cams,used the namura gasket kit it has the mls |
|
gaskets,it ran great this summer put about 40 hrs on the |
|
rebuild,went to go ride it the other day and white smoke is |
|
puffing out the pipe,checked the oil and it looks like chocolate |
|
milk,there is nothing leaking underneath the bike or around the |
|
water pump,so my question is is it the head gasket or the water |
|
pump seals?? |
|
Thanks for your help. |
|
#Post#: 4977-------------------------------------------------- |
|
Re: head gasket? |
|
By: FM Keller Date: November 29, 2012, 8:49 pm |
|
--------------------------------------------------------- |
|
Did you try a compression check? |
|
#Post#: 4980-------------------------------------------------- |
|
Re: head gasket? |
|
By: 88 zilla Date: November 29, 2012, 9:39 pm |
|
--------------------------------------------------------- |
|
Yeah i thought about that and doing a pressure check as well! |
|
#Post#: 4991-------------------------------------------------- |
|
Re: Head Gasket? |
|
By: Rider414 Date: November 30, 2012, 10:20 am |
|
--------------------------------------------------------- |
|
Water pump seal will most likely dump coolant out the weap hole. |
|
#1. Stop running it |
|
What brand is the Cylinder? I would tear it down and see if its |
|
a head gasket failure or a cracked cylinder. My YFZ450 with a |
|
Cylinder Works (CW) big bore kit cracked the jug. White smoke, |
|
milky oil, etc; |
|
|
|
#Post#: 5151-------------------------------------------------- |
|
Re: Head Gasket? |
|
By: 88 zilla Date: December 3, 2012, 6:48 pm |
|
--------------------------------------------------------- |
|
The cylinder is a magnum,namura piston,namura gasket set,what is |
|
a good cylinder to have? If i find this cylinder is cracked when |
|
I tear it down what to do?? I have a factory cylinder with a |
|
453cc sleeve in it but the sleeve is junk?? |
|
Thanks Eric.. |
|
#Post#: 5749-------------------------------------------------- |
|
Re: Head Gasket? |
|
By: yuzuha32 Date: December 10, 2012, 4:23 pm |
|
--------------------------------------------------------- |
|
If you do decide to go with another aftermarket cylinder i can |
|
get the athena complete cylinder kits for the LTZ it comes with |
|
the cylinder, gaskets, piston etc. |
|
standard size 513.74 |
|
big bore 430 kit 537.98 |
|
***************************************************** |
