 |
Return Create A Forum - Home |
 |
--------------------------------------------------------- |
|
Suzuki Quadracer HQ |
 |
https://suzukiquadracerhq.createaforum.com |
|
--------------------------------------------------------- |
|
***************************************************** |
|
Return to: Video / YouTube |
|
***************************************************** |
|
#Post#: 42990-------------------------------------------------- |
|
Re: me on Bartlett 250 vs 4mill Honda |
|
By: zilla273 Date: July 20, 2014, 11:13 am |
|
--------------------------------------------------------- |
|
I launch in 1rst with this gearing with 21in 8paddle sand |
|
snakes, 2nd is alittle to much, id like to try 13 on front for |
|
2nd gear launch to see if its any better. |
|
#Post#: 43116-------------------------------------------------- |
|
Re: me on Bartlett 250 vs 4mill Honda |
|
By: pcs Date: July 30, 2014, 11:32 pm |
|
--------------------------------------------------------- |
|
What size wheel and how long of a race |
|
#Post#: 43133-------------------------------------------------- |
|
Re: me on Bartlett 250 vs 4mill Honda |
|
By: lt250rwv Date: August 1, 2014, 2:07 am |
|
--------------------------------------------------------- |
|
Alot of the cylinder setup have to have .250 spacer plate. 363 |
|
sphinix is setup not to run spacer. Even if its a long rod motor |
|
they have to have .190 plate to run 86 piston. Im running spacer |
|
on my 4mil esr 310 pv. I just seen a 4 mil 310 put down very |
|
close to 58hp and 37 torque on pump gas a couple days ago. |
|
#Post#: 43138-------------------------------------------------- |
|
Re: me on Bartlett 250 vs 4mill Honda |
|
By: zilla273 Date: August 1, 2014, 11:39 am |
|
--------------------------------------------------------- |
|
I was talkin about stock cylinder 4mill, 2c |
|
#Post#: 43139-------------------------------------------------- |
|
Re: me on Bartlett 250 vs 4mill Honda |
|
By: zilla273 Date: August 1, 2014, 11:44 am |
|
--------------------------------------------------------- |
|
Pc its 300ft, i run 20inch tires on 8inch wheel, there 8paddle |
|
sand snakes. Just cheapies |
|
#Post#: 43140-------------------------------------------------- |
|
Re: me on Bartlett 250 vs 4mill Honda |
|
By: zilla273 Date: August 1, 2014, 11:48 am |
|
--------------------------------------------------------- |
|
Got my mind on getin this to next race as of now lol |
|
#Post#: 43141-------------------------------------------------- |
|
Re: me on Bartlett 250 vs 4mill Honda |
|
By: zilla273 Date: August 1, 2014, 11:51 am |
|
--------------------------------------------------------- |
|
Engine |
|
#Post#: 43142-------------------------------------------------- |
|
Re: me on Bartlett 250 vs 4mill Honda |
|
By: zilla273 Date: August 1, 2014, 11:53 am |
|
--------------------------------------------------------- |
|
Anyway here is pic of 250tires |
|
#Post#: 43156-------------------------------------------------- |
|
Re: me on Bartlett 250 vs 4mill Honda |
|
By: pcs Date: August 2, 2014, 11:36 pm |
|
--------------------------------------------------------- |
|
I ran those on my ltr and they work but the rubber is reall soft |
|
and after a whole season the paddle started to crack. I dont |
|
leave my paddle on the quad either when its parked. On the hard |
|
packed sand the paddle would bend back bc it was too soft. |
|
Timefor some skat traks |
|
#Post#: 43157-------------------------------------------------- |
|
Re: me on Bartlett 250 vs 4mill Honda |
|
By: zilla273 Date: August 3, 2014, 7:38 am |
|
--------------------------------------------------------- |
|
Yeah the rubber paddles roll over really easy, i have some |
|
8paddle haulers i wana try on it just gota put them on rims |
|
***************************************************** |
|
Previous Page |
|
Next Page |
