 |
Return Create A Forum - Home |
 |
--------------------------------------------------------- |
|
The Old Landrover Arms |
 |
https://seriouslyseries.createaforum.com |
|
--------------------------------------------------------- |
|
***************************************************** |
|
Return to: What Have You Done to Your Leafer Today? |
|
***************************************************** |
|
#Post#: 64123-------------------------------------------------- |
|
11" brakes onto 10" 2a |
|
By: mickandpaula101 Date: January 20, 2024, 11:37 am |
|
--------------------------------------------------------- |
|
put 11"brakes onto 2a,how,where does the vacuum draw from the |
|
engine.trying to get the old m/c to work the new brakes before |
|
going servo.no joy yet cheers mick |
|
#Post#: 64124-------------------------------------------------- |
|
Re: 11" brakes onto 10" 2a |
|
By: Sunny Jim Date: January 23, 2024, 9:04 am |
|
--------------------------------------------------------- |
|
I would have thought you'd need to change the master cylinder if |
|
you are going from single to twin leading shoes? |
|
When I fitted the servo to mine, I had to drill and tap the |
|
blank on the inlet manifold, then fit the adapter part, and |
|
elbow pipe. I did it in the workshop at my former employer, |
|
rather than try and do it at home. Later inlet manifolds have a |
|
blanking plug. |
|
If you fit the standard pedal mounted servo, you would need a |
|
different master cylinder anyway. |
|
I am assuming it is petrol, diesel is different of course, and |
|
not within my experience! |
|
Sunny Jim |
|
***************************************************** |
