 |
Return Create A Forum - Home |
 |
--------------------------------------------------------- |
|
The Mighty Nuovo Falcone VOC |
 |
https://nuovofalcone.createaforum.com |
|
--------------------------------------------------------- |
|
***************************************************** |
|
Return to: Parts and Service |
|
***************************************************** |
|
#Post#: 1149-------------------------------------------------- |
|
Tool Box keys-source... |
|
By: David Gilli Date: November 22, 2015, 11:32 am |
|
--------------------------------------------------------- |
|
Hello, |
|
Further to earlier mention, I think i have found the tool box |
|
keys available from lockdoctor.biz under Metal filing cabinet |
|
key in the range of 92001-92400... |
|
Search box on the site. |
|
I have not yet looked closely to see if the number is on the |
|
outside of the locks. |
|
The two are different numbers from each other. |
|
I see they sell the locks too in case you need them. |
|
Apparently three numbers in the range of 001-400 would be on |
|
the lockface.....(ie.last three numbers).my keys end in 90 and |
|
99 and all the 5 numbers are on the key. |
|
Worked out �7.14 total for the two incl. delivery. So we are |
|
talking about cut keys here, not just blanks. I hope this is |
|
useful to someone. |
|
Best to all. |
|
#Post#: 1150-------------------------------------------------- |
|
Re: Tool Box keys-source... |
|
By: Bruno Date: November 23, 2015, 12:10 pm |
|
--------------------------------------------------------- |
|
I bought two complete locks with two keys each,from eBay.Listed |
|
as you say,as locker locks. |
|
I had to buy complete locks as a previous owner had bodged on |
|
some bolts instead of locks.I think I paid about �10 for both. |
|
#Post#: 1153-------------------------------------------------- |
|
Re: Tool Box keys-source... |
|
By: banquo Date: November 28, 2015, 6:10 am |
|
--------------------------------------------------------- |
|
Mine came with brand new locks and 2 keys, but although they |
|
work well enough, the lock is far smaller than the original. I |
|
got a pair of original ones with some Serbian spares, and the |
|
lock faces are much larger in diameter, and brassy looking, |
|
instead of the chrome that came on mine. If you're not a slave |
|
for originality, the locker ones seem to do the job. |
|
#Post#: 2108-------------------------------------------------- |
|
Re: Tool Box keys-source... |
|
By: patentgeek Date: August 6, 2017, 1:14 am |
|
--------------------------------------------------------- |
|
Direct link to the lockdoctor.biz page: |
|
https://www.lockdoctor.biz/product/001-400-lf-england-eurolock-baton-key/ |
|
But ordering these requires knowing the last 3-digits of the key |
|
code number, and unlike the ignition key, the key code is not |
|
stamped on the tool box lock face. |
|
What to do if the key code is unknown? |
|
#Post#: 2109-------------------------------------------------- |
|
Re: Tool Box keys-source... |
|
By: OldeGoat Date: August 6, 2017, 2:03 am |
|
--------------------------------------------------------- |
|
I bought a pair of locks from eBay which were for a Royal |
|
Enfield. Not as nice as the originals, the lever needed bending |
|
a bit but they work. |
|
Less than 10GBP if I recall. |
|
#Post#: 2112-------------------------------------------------- |
|
Re: Tool Box keys-source... |
|
By: patentgeek Date: August 6, 2017, 11:52 am |
|
--------------------------------------------------------- |
|
I'm not inclined to replace the original locks if they are |
|
working okay. |
|
Does anyone have the manufacturer and part number for a key |
|
blank that will fit the original locks? If I can get blanks, my |
|
local locksmith can cut a key to fit the lock. |
|
#Post#: 2142-------------------------------------------------- |
|
Re: Tool Box keys-source... |
|
By: cloggy Date: August 18, 2017, 5:51 pm |
|
--------------------------------------------------------- |
|
I just ground the tips of some bigger keys thinner. Took three |
|
minutes. |
|
#Post#: 2626-------------------------------------------------- |
|
Re: Tool Box keys-source... |
|
By: patentgeek Date: June 5, 2019, 2:20 pm |
|
--------------------------------------------------------- |
|
Reviving this thread. . . . |
|
I finally found a locksmith who was able to make new keys for my |
|
original tool box locks. Whoot! |
|
The locksmith says he used an Eagle 01014SM key blank. |
|
Hopefully that information is useful to others. |
|
#Post#: 2629-------------------------------------------------- |
|
Re: Tool Box keys-source... |
|
By: banquo Date: June 6, 2019, 4:54 am |
|
--------------------------------------------------------- |
|
[quote author=patentgeek link=topic=190.msg2626#msg2626 |
|
date=1559762445]The locksmith says he used an Eagle 01014SM key |
|
blank. Hopefully that information is useful to others. |
|
[/quote] |
|
Thanks PG - the code seems to be (letter) O1014 not 0114. but I |
|
can find only O1014S on their site - no sign of SM |
|
https://ekeyblanks.com/search.php?search_query=O1014S§ion=product |
|
***************************************************** |
