Introduction
Introduction Statistics Contact Development Disclaimer Help
Return Create A Forum - Home
---------------------------------------------------------
mc-Things
https://mcthings.createaforum.com
---------------------------------------------------------
*****************************************************
Return to: mc-Gateway
*****************************************************
#Post#: 1313--------------------------------------------------
Unable to 'config' mc-Gateway... trying to get through MQTT tuto
rial
By: bdevlin Date: November 13, 2016, 8:16 pm
---------------------------------------------------------
Any advice? You can see it's the latest firmware. Basically it's
impossible to set up the MQTT details as per the video tutorial.
http://i61.photobucket.com/albums/h46/braddevlin/mc-gateway.jpg
#Post#: 1315--------------------------------------------------
Re: Unable to 'config' mc-Gateway... trying to get through MQTT
tutorial
By: mc-T2 Date: November 14, 2016, 10:20 am
---------------------------------------------------------
Hi bdevlin,
The reason is that your gateway is not fully up-to-date. Notice
that your GWVersion is at 0.6-354. It should be at 0.6-363.
To update your gateway, you can check out the quick start guide
here:
https://goo.gl/gJCszK
and the files are available for
download here:
www.mcthings.com/downloads
The mc-Gateway requires you to update the Host module (using
mc-OTA and the mc-Dongle) but also requires you to update the
application processor using the file on a USB stick.
Until you update the application processor using a USB, you will
not be able to modify the gateway config settings.
#Post#: 1318--------------------------------------------------
Re: Unable to 'config' mc-Gateway... trying to get through MQTT
tutorial
By: bdevlin Date: November 14, 2016, 11:25 am
---------------------------------------------------------
Thanks, I did the USB update yesterday but I guess it didn't
take. I reformatted my USB stick and reflashed this morning
after you pointing out the FW revision was older. Now it works!
I'll try the MQTT tutorial today or later tomorrow. Sorry to
waste every one's time, but I thought everything was updated
correctly.
#Post#: 1319--------------------------------------------------
Re: Unable to 'config' mc-Gateway... trying to get through MQTT
tutorial
By: mc-T2 Date: November 14, 2016, 11:45 am
---------------------------------------------------------
Hey bdevlin,
No worries! Glad it is working now!
Good luck with the tutorial and let us know if you have any
other questions
*****************************************************
You are viewing proxied material from gopher.createaforum.com. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.