 |
Return Create A Forum - Home |
 |
--------------------------------------------------------- |
|
Lionel Trains |
 |
https://lioneltrains.createaforum.com |
|
--------------------------------------------------------- |
|
***************************************************** |
|
Return to: Beginners Q & A |
|
***************************************************** |
|
#Post#: 2036-------------------------------------------------- |
|
How to keep track from seperating under Christmas 🎄 |
|
By: Ramman347 Date: December 6, 2018, 3:59 pm |
|
--------------------------------------------------------- |
|
Hi guys. Are there any tips to keeping tracks from seperating. A |
|
few laps and track seperates. Thank you for the advice. |
|
#Post#: 2037-------------------------------------------------- |
|
Re: How to keep track from seperating under Christmas 🎄 |
|
By: TrainLarry Date: December 6, 2018, 8:56 pm |
|
--------------------------------------------------------- |
|
Welcome to the forum! |
|
If you have '027' or '0' gauge track, you need to pull the pins |
|
out of the end of the track, then use a needle nose pliers to |
|
squeeze the track at the base under the hole to close the hole |
|
slightly. Then reinsert the pin. Squeeze the track the same way |
|
on the opposite end of the track, then the mating track will be |
|
a tight fit. |
|
There are also special track clips that snap under the tracks at |
|
each joint to hold the track in place, if you need them. |
|
https://www.amazon.com/Lionel-027-Track-Clips-pack/dp/B000BVL3UY |
|
Larry |
|
***************************************************** |
