Introduction
Introduction Statistics Contact Development Disclaimer Help
Return Create A Forum - Home
---------------------------------------------------------
Lionel Trains
https://lioneltrains.createaforum.com
---------------------------------------------------------
*****************************************************
Return to: Info & Forum Support
*****************************************************
#Post#: 2612--------------------------------------------------
New to Model Trains
By: Gatekpr2002 Date: December 10, 2020, 5:08 pm
---------------------------------------------------------
Hi so I bought a small ready to run set with a couple
accessories. The polar express gateman I have hooked to an
accessory lock with the insulated rail. My gateman comes out
when I first power up the track for like 5 seconds and then
returns in. My train has never moved. I go over the track with
the train and the gateman never comes out. Is this because I
don�t have a basic oval track? Does my left and right curves
mess something up with the power? It works fine with the
accessory remote. I plug that in and push down the gateman comes
in and out just fine. Any help would be great!! I would send a
picture but it keeps telling me upload folder full even on the
smallest 83kb photo.
#Post#: 2613--------------------------------------------------
Re: New to Model Trains
By: TrainLarry Date: December 10, 2020, 7:54 pm
---------------------------------------------------------
Welcome to the forum!
It sounds like Gateman may not be hooked up properly to the
accessory lockon and insulated track.
Here is the owner's manual for the Gateman - go over the hookup
instructions for your track.
https://www.lionelsupport.com/media/servicedocuments/7228781063250PEPAutoGatema…
The shape of your layout and curves have nothing to do with the
operation of the Gateman.
Larry
#Post#: 2614--------------------------------------------------
Re: New to Model Trains
By: Gatekpr2002 Date: December 10, 2020, 8:10 pm
---------------------------------------------------------
Thanks for the response Larry. I have gone over the manual
multiple times; even though the manual contradicts Lionel
YouTube video; one saying the break in the insulated 5inch track
goes opposite the lock on and the other saying it should be on
the same side as the lock on. Either way tried both and produced
same result. When I plug in track gateman comes out, train on
other side of track not moving, for about 5 seconds retreats
never to be seen again until I unplug and plug back in. I mean
it�s a jack that only goes in one way. I even returned it for a
new one thinking it was a production error, same thing with
replacement. I would show video if forum would let me.
#Post#: 2618--------------------------------------------------
Re: New to Model Trains
By: TrainLarry Date: December 11, 2020, 10:32 am
---------------------------------------------------------
Which side of the lockon the breaks in the insulated rails are
makes no operational difference. The accessory will work
properly with both hook ups.
There has to be some wiring problem somewhere, or else the
Gateman was manufactured incorrectly. There should be no reason
the accessory does not work properly if wired properly.
You can upload a video (.mpg) file, choosing the Attach:
function under the posting area.
Larry
#Post#: 2664--------------------------------------------------
Re: New to Model Trains
By: Gatekpr2002 Date: December 22, 2020, 7:15 pm
---------------------------------------------------------
Hi Larry sorry for the delayed response, my wife, who is the
ADON at a long term care facility & rehab center came down with
covid so our concentration was on her health. Thanks to prayers
she had a mild case and I�ve had no symptoms thus far. I have
attached a video to show you of my simple train design with plug
and play gateman that does not seem to work correctly. I have
contacted Lionel still no response. Keeps telling me file is
too large. I�ve broke it down into (3) 30 second videos. This
forum is pretty hard and basic to deal with. Would be happy to
send to you via direct email.
*****************************************************
You are viewing proxied material from gopher.createaforum.com. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.