 |
Return Create A Forum - Home |
 |
--------------------------------------------------------- |
|
Chainsaw Repair |
 |
https://chainsawrepair.createaforum.com |
|
--------------------------------------------------------- |
|
***************************************************** |
|
Return to: Poulan |
|
***************************************************** |
|
#Post#: 9686-------------------------------------------------- |
|
Poulan 4000 |
|
By: Cut4fun Date: June 8, 2012, 3:07 pm |
|
--------------------------------------------------------- |
|
I was looking for my poulan 4000 saw pics and noticed there |
|
wasnt a thread. |
|
#Post#: 9687-------------------------------------------------- |
|
Re: Poulan 4000 |
|
By: Cut4fun Date: June 8, 2012, 3:09 pm |
|
--------------------------------------------------------- |
|
Feb 2011 the stock 4000 cutting yellow poplar |
|
http://www.youtube.com/watch?v=oydyJh35_Tw |
|
#Post#: 9688-------------------------------------------------- |
|
Re: Poulan 4000 |
|
By: Cut4fun Date: June 8, 2012, 3:12 pm |
|
--------------------------------------------------------- |
|
My 3400 parts saw I bought to cover the 4000 needs someday. |
|
Today for the first time I noticed 3400 had the 4000 high top |
|
air filter cover etc. |
|
[IMG] |
|
http://i59.photobucket.com/albums/g289/doemaster789/smiles/woot-1.gif[/img][IMG… |
|
[IMG] |
|
http://i59.photobucket.com/albums/g289/doemaster789/2100/40003400012.jpg[/img |
|
[IMG] |
|
http://i59.photobucket.com/albums/g289/doemaster789/2100/40003400011.jpg[/img |
|
[IMG] |
|
http://i59.photobucket.com/albums/g289/doemaster789/2100/40003400010.jpg[/img |
|
#Post#: 9696-------------------------------------------------- |
|
Re: Poulan 4000 |
|
By: rms61moparman Date: June 8, 2012, 10:43 pm |
|
--------------------------------------------------------- |
|
You know what the sad part is??? |
|
That cover is worth as much as the rest of the saw!!! |
|
Mike |
|
#Post#: 9697-------------------------------------------------- |
|
Re: Poulan 4000 |
|
By: Cut4fun Date: June 9, 2012, 7:30 am |
|
--------------------------------------------------------- |
|
Besides measuring the bore. Is there a way to tell this is a |
|
3400 with just a 4000 top cover and not a 4000 with a 3400 |
|
recoil cover? |
|
If I end up measuring bore. Anyone know off hand what the |
|
bores of 3400 3700 4000 were? |
|
#Post#: 9698-------------------------------------------------- |
|
Re: Poulan 4000 |
|
By: Chainsawrepair Date: June 9, 2012, 8:32 am |
|
--------------------------------------------------------- |
|
Dug up some of Nik, Mark, Mike and others info. |
|
4000 bore 49.2mm |
|
3700 47.7mm |
|
3400 46mm |
|
4000 the recoil pulley is a little different to account for the |
|
difference in starter dogs 530026371 for the 4000 and 530026487 |
|
for the 3400. |
|
Saving some info. Homelite 410 ring 93216 1.937 in. (49 mm) |
|
#Post#: 9699-------------------------------------------------- |
|
Re: Poulan 4000 |
|
By: rms61moparman Date: June 9, 2012, 9:52 am |
|
--------------------------------------------------------- |
|
And of course the 4000 muffler has the side slit in it. |
|
That is the LEAST sure way to tell though because they are the |
|
easiest thing to replace. |
|
I have also found that the compression is an "indicator" in the |
|
really clean low hour saw. |
|
3400s USUALLY carry 120-130 broken in |
|
3700s are closer to the 130-140 range |
|
4000s are usually in the 140-150 range. |
|
Naturally these aren't "for certain" but if you are just |
|
checking or suspecting it is one more clue to look for. |
|
There are some other things too like the heavier style AV mounts |
|
and the clutch cover/side brace but they could have been changed |
|
very easily over the last 30 years. |
|
|
|
Mike |
|
#Post#: 9881-------------------------------------------------- |
|
Re: Poulan 4000 |
|
By: rms61moparman Date: June 22, 2012, 9:51 pm |
|
--------------------------------------------------------- |
|
Well I can't wait until some of you semi Poulan guys get to run |
|
this 4000 that wigglesworth ported for me. |
|
It is reallly an impressive saw! |
|
Mike |
|
#Post#: 9924-------------------------------------------------- |
|
Re: Poulan 4000 |
|
By: Chainsawrepair Date: June 24, 2012, 4:50 pm |
|
--------------------------------------------------------- |
|
Somebody wanted to see these pics. |
|
1 of the inside of recoil and flywheel, 1 of the S clip, and 1 |
|
of the 2 bar studs, same length studs 1 appears to have been |
|
buggered up on the threads end and this was how someone had |
|
fixed it in the past. It functions as should and never a |
|
problem due to the poor ugly bar stud. |
|
[IMG] |
|
http://i59.photobucket.com/albums/g289/doemaster789/2100/recoil4000005.jpg[/img |
|
[IMG] |
|
http://i59.photobucket.com/albums/g289/doemaster789/2100/recoil4000008.jpg[/img |
|
[IMG] |
|
http://i59.photobucket.com/albums/g289/doemaster789/2100/recoil4000011.jpg[/img |
|
#Post#: 9994-------------------------------------------------- |
|
Re: Poulan 4000 |
|
By: Cut4fun Date: July 1, 2012, 8:23 am |
|
--------------------------------------------------------- |
|
Well I B. |
|
I knew the 4000 was missing 1 long upper rear recoil bolt and I |
|
looked at the parts saw pic and there it is. 4000 now has all |
|
it's recoil bolts. Something so simple and I over looked it. |
|
:-[ |
|
missing bolt |
|
[IMG] |
|
http://i59.photobucket.com/albums/g289/doemaster789/2100/40003400005.jpg[/img |
|
found bolt to use right there, duh |
|
[IMG] |
|
http://i59.photobucket.com/albums/g289/doemaster789/2100/40003400012.jpg[/img |
|
***************************************************** |
|
Next Page |
![http://i59.photobucket.com/albums/g289/doemaster789/smiles/woot-1.gif[/img][IMG…](http://i59.photobucket.com/albums/g289/doemaster789/smiles/woot-1.gif[/img][IMG]http://i59.photobucket.com/albums/g289/doemaster789/smiles/woot-1.gif[/img]){kind=link}
