Introduction
Introduction Statistics Contact Development Disclaimer Help
Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
Return to: Carb Fixes and Mods
*****************************************************
#Post#: 8825--------------------------------------------------
Zama Tech Guide to carbs
By: Cut4fun Date: April 26, 2012, 6:55 pm
---------------------------------------------------------
Zama
http://www.zamacarb.com/pdfs/TechGuide_2007.pdf
#Post#: 17162--------------------------------------------------
Re: Zama Tech Guide to carbs
By: Chainsawrepair Date: February 22, 2013, 10:20 am
---------------------------------------------------------
Adjusting the metering lever ( fulcrum ) height. Zama
http://www.zamacarb.com/images/techsupport/AdjMeteringHeight.pdf
#Post#: 23300--------------------------------------------------
Re: Zama Tech Guide to carbs
By: kr5258 Date: September 7, 2013, 6:56 am
---------------------------------------------------------
More good Zama info:
http://www.zamacarb.com/techsupport.html
http://www.zamacarb.com/techsupport.html
#Post#: 35245--------------------------------------------------
Re: Zama Tech Guide to carbs
By: 350XP Date: February 23, 2014, 6:53 pm
---------------------------------------------------------
Zama specs
http://www.zamacarb.com/prod_lookup.cfm
#Post#: 84402--------------------------------------------------
Re: Zama Tech Guide to carbs
By: rayvil01 Date: February 11, 2019, 9:38 am
---------------------------------------------------------
Went looking for a carb kit this morning and found the link
above goes to 404: Not Found. They probably did some website
work. Here's a link that does work for Zama carb lookup:
https://www.zamacarb.com/carburetors/carburetor_lookup
*****************************************************
You are viewing proxied material from gopher.createaforum.com. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.