Introduction
Introduction Statistics Contact Development Disclaimer Help
Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
Return to: Stickys of How to Basics commonly ask questions
*****************************************************
#Post#: 91694--------------------------------------------------
Stihl red control levers
By: Chainsawrepair Date: November 8, 2025, 7:40 am
---------------------------------------------------------
These 2 old post make the most since of it all.
stihl99 = This is my experience from industry coming from
automotive automation world.
Osha does mandate an emergency stop button for energized power
source / equipment must be red, newer stuff the past 20 + years
have been red buttons or red with yellow circle labeled
Emergency Stop
Disconnect switches are also red tipped or red/yellow combo. I
have seen black e-stops and temp stops before, but they were
replaced I have not seen one one in years now.
Osha made a big push in the late 90's early 2000's that all
emergency stop button / switches to kill an energized source
must be red.
Power Distribution Panels 480 volt or higher are still
acceptable with the black rotating lockable disconnect switches,
but that is all I have seen for years newly manufactured that
were acceptable and not red in color.
DaveP = That would be about the time frame and now that you
mention it I was a maintenance man at Poulan in Nashville, AR
and I remember having to replace quite a few black kill switches
with red right after an OSHA inspection in 98 or 99.
Personally I think if you don't know how to turn a saw off
without looking you probably don't need to be running it. Also I
totally agree that a red switch on an orange background is much
harder to see than a black switch.
Poulan and stihl shown in couple pics.
*****************************************************
You are viewing proxied material from gopher.createaforum.com. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.