 |
Return Create A Forum - Home |
 |
--------------------------------------------------------- |
|
Chainsaw Repair |
 |
https://chainsawrepair.createaforum.com |
|
--------------------------------------------------------- |
|
***************************************************** |
|
Return to: Husqvarna |
|
***************************************************** |
|
#Post#: 90558-------------------------------------------------- |
|
Husqvarna 135 X Torque 2019 - starting Problem |
|
By: Bonsaichris Date: April 3, 2024, 4:10 pm |
|
--------------------------------------------------------- |
|
Hoping someone can assist. Machine has fresh fuel + filter and |
|
hoses. Carb has been changed and all checked over, new plug etc. |
|
Choke set, purge operated etc. engine fires on first pull but |
|
stops immediately. Further atttempts does not fire at all. |
|
There is a spark which appears to me to be a bit weak. My |
|
experiance is on 4 strokes so I could be misjudging this. Is it |
|
possible the ignition pack is faulty, is it possible to test it. |
|
Any help much appreciated. |
|
Cheers Bonsai Chris |
|
#Post#: 90559-------------------------------------------------- |
|
Re: Husqvarna 135 X Torque 2019 - starting Problem |
|
By: Chainsawrepair Date: April 4, 2024, 5:32 am |
|
--------------------------------------------------------- |
|
Aftermarket carb? Sometimes you get bad ones. Strato carbs on |
|
these known issues. |
|
Plug getting wet still after so called start off. |
|
Coil could be issue too. So unless you have known good one to |
|
test. Does it still have spark even after the first try. |
|
Worst case. Be pulling muffler for a look at front of piston and |
|
back of cylinder. Could still happen out of sight on sides. A |
|
score with pinned ring. |
|
Not really a saw you want to get a bunch a money in IMHO. Throw |
|
away type saw if you cant do it yourself to fix. |
|
***************************************************** |
