 |
Return Create A Forum - Home |
 |
--------------------------------------------------------- |
|
Chainsaw Repair |
 |
https://chainsawrepair.createaforum.com |
|
--------------------------------------------------------- |
|
***************************************************** |
|
Return to: Stihl |
|
***************************************************** |
|
#Post#: 88369-------------------------------------------------- |
|
Stihl 020 avpe ignition |
|
By: jcsmith Date: September 15, 2021, 12:24 pm |
|
--------------------------------------------------------- |
|
From my research so far, this saw has a 2 piece transistor |
|
ignition. The trigger unit is behind the flywheel and the coil |
|
is outside of the flywheel. Is there a way to test both |
|
components?Saw has no spark. Also wondering if parts are |
|
available. I haven't gotten the engine out of the all metal |
|
"clamshell" yet to check for loose screws, bad wires and |
|
grounds. Saw is apart to the point where engine should come out |
|
, but something is thwarting my effort. I don't have a shop |
|
manual for this 1114 series saw. Any tips or help would be much |
|
appreciated. This model was made from'74 to '76. I've been told |
|
these were nice saws for 32cc. |
|
|
|
|
|
Chris |
|
#Post#: 88370-------------------------------------------------- |
|
Re: Stihl 020 avpe ignition |
|
By: ray benson Date: September 15, 2021, 6:33 pm |
|
--------------------------------------------------------- |
|
Check your messages for a link to the service manual. |
|
#Post#: 88375-------------------------------------------------- |
|
Re: Stihl 020 avpe ignition |
|
By: jcsmith Date: September 16, 2021, 3:20 pm |
|
--------------------------------------------------------- |
|
Thank you Ray |
|
#Post#: 88381-------------------------------------------------- |
|
Re: Stihl 020 avpe transistor ignition |
|
By: jcsmith Date: September 17, 2021, 4:32 pm |
|
--------------------------------------------------------- |
|
The link Ray sent me was extremely helpful. Unfortunately it |
|
only addressed points style ignition. I need info on the |
|
transistor style ignition. I read somewhere that the trigger |
|
unit is what normally goes bad. This is the worst saw I have |
|
ever worked on. |
|
Does anyone have any experience with this series saw? I have a |
|
bad feeling parts will be hard to come by. I plan on checking |
|
with Chainsawr when I have a complete list of parts I need. Any |
|
help is appreciated. |
|
Chris |
|
#Post#: 88390-------------------------------------------------- |
|
Re: Stihl 020 avpe ignition |
|
By: president Date: September 18, 2021, 2:52 pm |
|
--------------------------------------------------------- |
|
look way down into the saw behind the muffle on the top left |
|
side |
|
you will see a hidden screw that needs to come out |
|
also the new trigger is mounted to one of the hold down screws |
|
on the coil .They are availible from a stihl dealer and will |
|
eliminate |
|
the points. They work great! I have an 020av super with that |
|
setup |
|
#Post#: 88392-------------------------------------------------- |
|
Re: Stihl 020 avpe ignition |
|
By: jcsmith Date: September 18, 2021, 8:42 pm |
|
--------------------------------------------------------- |
|
President, thanks for the reply. I got the engine out of the |
|
fuel tank/fan/flywheel cover. I had all the screws removed, but |
|
the impulse line,fuel line, and rubber boot were holding me up. |
|
This saw is the professional electronic model with rear handle , |
|
and supposed to have a transistor ignition. This saw shouldn't |
|
have points. |
|
I don't have the correct flywheel puller, so does anyone have an |
|
alternate method ? |
|
President, did you have to remove the flywheel even tho the new |
|
trigger mounted to the coil? |
|
|
|
Chris |
|
|
|
#Post#: 88393-------------------------------------------------- |
|
Re: Stihl 020 avpe ignition |
|
By: president Date: September 18, 2021, 9:35 pm |
|
--------------------------------------------------------- |
|
Hi Chris |
|
Mine came equiped with the module on the coil |
|
and no need to remove the flywheel to install the module |
|
Keith |
|
#Post#: 88398-------------------------------------------------- |
|
Re: Stihl 020 avpe ignition |
|
By: jcsmith Date: September 19, 2021, 4:25 pm |
|
--------------------------------------------------------- |
|
Keith, thanks again. That is good to know.Do you have the part |
|
number for the module by chance? |
|
|
|
|
|
|
|
Chris |
|
#Post#: 88403-------------------------------------------------- |
|
Re: Stihl 020 avpe ignition |
|
By: DNX800 Date: September 20, 2021, 7:59 am |
|
--------------------------------------------------------- |
|
The trigger unit is 1118 400 1001 , but nla since years. |
|
#Post#: 88406-------------------------------------------------- |
|
Re: Stihl 020 avpe ignition |
|
By: president Date: September 20, 2021, 2:10 pm |
|
--------------------------------------------------------- |
|
I have a new module OEM stihl I would let go |
|
for fifty bucks US funds if you like? |
|
it comes with an anti grounding sleeve |
|
same part# quoted |
|
Keith |
|
***************************************************** |
|
Next Page |
