Introduction
Introduction Statistics Contact Development Disclaimer Help
Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
Return to: Homelite
*****************************************************
#Post#: 87722--------------------------------------------------
Reading Homelite serial numbers
By: Chainsawrepair Date: February 28, 2021, 6:51 am
---------------------------------------------------------
Dont know if true or not but saving.
The following information should answer most of your questions
regarding serial numbers and how to read them.
EXAMPLE: Serial number: 4G1521238
"4" - This number specifies the assembly line the unit was built
on. This could also be represented by a letter.
"G" - This letter specifies the year of final assembly. (See
letter codes below). Before a letter was used to specify the
year, a number was used. (See numeric code below).
"152" - The next 3 numbers specify the calendar day of the year
(day 152).
"1238" - This was the 1,238th unit built that day.
"G152" - These 4 digits make up the LOT NUMBER.
LETTER CODE FOR YEARS:
C-1981 D-1982 E-1983 F-1984 G-1985 H-1986 I-1987 J-1988
K-1989 L-1990 M-1991 N-1992 O-1993 P-1994 Q-1995 R-1996
S-1997 T-1998 U-1999 V-2000 W-2001 X-2002 Y-2003 Z-2004
PREVIOUS NUMERIC CODE:
2-1972 3-1973 4-1974 5-1975 6-1976 7-1977 8-1978
9-1979 0-1980 1-1981
Prior to the 9-digit serial number now being used, an 8-digit
number was used. The 8-digit number reads the same as the
9-digit number except the assembly line designation was not
used.
#Post#: 87724--------------------------------------------------
Re: Reading Homelite serial numbers
By: ray benson Date: February 28, 2021, 9:07 am
---------------------------------------------------------
Yes that is from the technical service bulletin 185-008. Signed
by Peery Gibson - service manager - forestry products
*****************************************************
You are viewing proxied material from gopher.createaforum.com. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.