 |
Return Create A Forum - Home |
 |
--------------------------------------------------------- |
|
Chainsaw Repair |
 |
https://chainsawrepair.createaforum.com |
|
--------------------------------------------------------- |
|
***************************************************** |
|
Return to: Solo |
|
***************************************************** |
|
#Post#: 87530-------------------------------------------------- |
|
Solo 650 - carburetor replacement option |
|
By: louie3888 Date: December 31, 2020, 6:57 pm |
|
--------------------------------------------------------- |
|
Hi, |
|
I have a Solo 650 chainsaw with a Walbro 21-245 9-7 carburetor |
|
that I was looking to get an affordable replacement unit from |
|
Amazo to get the saw running. Instead of a rebuild was going to |
|
see if there was a replacement option. Thank you in advance. |
|
Attached is an image of the current carb. |
|
-Louie |
|
#Post#: 87531-------------------------------------------------- |
|
Re: Solo 650 - carburetor replacement option |
|
By: louie3888 Date: December 31, 2020, 9:35 pm |
|
--------------------------------------------------------- |
|
Wonder if a carburetor from a husqvarna 350 chainsaw would work |
|
on the Solo 650? |
|
#Post#: 87532-------------------------------------------------- |
|
Re: Solo 650 - carburetor replacement option |
|
By: Chainsawrepair Date: January 1, 2021, 7:09 am |
|
--------------------------------------------------------- |
|
Havent looked into it before. |
|
But a rebuild kit is less then 10 bucks most times and takes |
|
about 30mins. I'd be digging into that carb first. Just to |
|
simple to rebuild. |
|
Is this the carb? Solo 639 645 650 Chainsaw Walbro HDA126 |
|
HDA127A HDA170A = Carb Kit K22-HDA |
|
Solo 650 IPL |
|
http://s30387.gridserver.com/partsDiagrams/Solo%20650.pdf |
|
#Post#: 87533-------------------------------------------------- |
|
Re: Solo 650 - carburetor replacement option |
|
By: louie3888 Date: January 2, 2021, 2:03 pm |
|
--------------------------------------------------------- |
|
I ordered a rebuild kit. I gave the current one a good cleaning |
|
and it seems it's in decent shape. Removed the metering valve |
|
and gave everything a good cleaning. Hard to tell if any ports |
|
clogged. New fuel filter, cleaned carb old gaskets, new |
|
decompression valve, and when I put the spark tester between the |
|
plug I get a decent light pulse. I can see the fuel flow when |
|
the plunger is pressed, just it seems nothing going in the |
|
throttle. I poured a small amount of gas into the throttle blade |
|
port and it seems like it whats to turn over then it dies, does |
|
not last long. Maybe the carb kit will help unless there are |
|
some other ideas. I don't have a compression tester, however, |
|
when the decompression valve is on hard pulls so feels like high |
|
compression. FYI - this is why I thought it would be easier to |
|
try an Amazon carb special that would fit and replace the |
|
original model. Thank you! |
|
***************************************************** |
