Introduction
Introduction Statistics Contact Development Disclaimer Help
Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
Return to: Cordless Battery OPE - Corded Electric
*****************************************************
#Post#: 82941--------------------------------------------------
Kobalt 40v
By: Chainsawrepair Date: July 17, 2018, 10:42 am
---------------------------------------------------------
Kobalt 40-volt Lithium Ion 8-in Cordless Electric Pole Saw
(Battery Included). Anyone got any time behind this?
My dad is wanting a battery pole saw for clearing old logging
roads etc up on the hills.
https://www.lowes.com/pd/Kobalt-40-volt-Lithium-Ion-8-in-Cordless-Electric-Pole…
https://www.lowes.com/pl/Pole-pruning-saws-Chainsaws-pole-saws-Outdoor-tools-eq…
Needs to be pretty light and wants to have about 12' reach with
him holding it. I suggested a manual pole saw but he said way
to many to clear for that. So suggested gas echo like I had. Got
to heavy as he checked into it.
#Post#: 82942--------------------------------------------------
Re: Kobalt 40v Pole Saw
By: HolmenTree Date: July 18, 2018, 8:44 am
---------------------------------------------------------
Not a pole saw but I did put a pole saw bar I used to run on my
old HT 75 pole saw. HT 75 now runs a power broom which is the
best thing I did with the HT75.
So I put the 16" .043 Stihl bar on my Husky T536 Li Xp saw. Had
to redrill a new oiler hole and I found a good cutting new .043
chain. A Oregon 90PX. Cuts better then the Stihl 71 and 61 PM I
was using earlier in 10".
Pic here shows the 536 with the 16" cutting up some poplars on
the ground. Had to fell 6 trees over top a chain link fence.
Cuts good.
#Post#: 82984--------------------------------------------------
Re: Kobalt 40v Pole Saw
By: Chainsawrepair Date: July 26, 2018, 9:58 am
---------------------------------------------------------
Dad found one in stock yesterday finally. So he bought it.
Hope to be able to check it out soon.
Kobalt 40 volt Lithium 8-in
store pic
#Post#: 82994--------------------------------------------------
Re: Kobalt 40v Pole Saw
By: Cut4fun Date: July 28, 2018, 10:40 am
---------------------------------------------------------
Dad said he is loving this polesaw for the limbs along the lanes
and ole logging roads he is doing. Light and fast cutting even
to him at his age.
#Post#: 83092--------------------------------------------------
Re: Kobalt 40v Pole Saw
By: Chainsawrepair Date: August 13, 2018, 9:27 am
---------------------------------------------------------
He said still going strong and has yet to wear a battery out
doing the trim cuttings. Said still likes everything about it
except for one thing he noticed. Seems there is a vent hole in
the top of bar oil tank cap. Said it seems to leak.
If that is it. I think I have a redneck fix for that. duckbill
set up might work.
#Post#: 83207--------------------------------------------------
Re: Kobalt 40v Pole Saw
By: Chainsawrepair Date: September 6, 2018, 8:44 am
---------------------------------------------------------
Cuts great and the angled head is a plus.
Even though it is listed as light weight the cutting end is
where most of the weight s so still gets heavy lifting and
holding for cuts.
Only leaks out of the cap bar oil hole with left in a position
to do so for a long time. Not really a issue IMO.
#Post#: 85479--------------------------------------------------
Re: Kobalt 40v Pole Saw chainsaw
By: Chainsawrepair Date: August 1, 2019, 9:23 pm
---------------------------------------------------------
Bought one of these today that looks like new to give to dad.
https://www.lowes.com/pd/Kobalt-40-volt-Lithium-Ion-12-in-Cordless-Electric-Cha…
No battery to test so took a chance till I can get dads batt to
test with.
#Post#: 85484--------------------------------------------------
Re: Kobalt 40v chainsaw
By: Chainsawrepair Date: August 2, 2019, 7:14 am
---------------------------------------------------------
Thought of dad when I seen this a like new used 40v Kolbalt
chainsaw yesterday while down in Marion. Didnt come with battery
so hope it works.
Dad already has the 40v pole saw and loves it so figured it
would make a good gift. Plus a back up to the easy start 180
trim saw I gave him before. So when it is down again for work so
he dont have to try and use the pole saw to try finish cutting
around the land.
#Post#: 85589--------------------------------------------------
Re: Kobalt 40v
By: Cut4fun Date: September 20, 2019, 9:26 am
---------------------------------------------------------
Well finally got a 40v battery from dad to test today. Not right
something wrong. Tore apart and a brush had twisted and fubarred
inside. Oh well.
#Post#: 85591--------------------------------------------------
Re: Kobalt 40v
By: ssidwell Date: September 20, 2019, 11:19 pm
---------------------------------------------------------
Can ya get new brushes for it?
Steve Sidwell, sent from my Samsung On5 using Tapatalk
*****************************************************
Next Page
You are viewing proxied material from gopher.createaforum.com. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.