Introduction
Introduction Statistics Contact Development Disclaimer Help
Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
Return to: Stihl
*****************************************************
#Post#: 48489--------------------------------------------------
Stihl 034 super
By: Chainsawrepair Date: October 28, 2014, 11:48 am
---------------------------------------------------------
Just had a super nice 1 owner stihl 034 super dropped off.
Friend from work bought new (wish I would have ask what year).
Says it is getting harder and harder to pull over. :-\
Will get some pics and hopefully more info on a quick look over.
#Post#: 48501--------------------------------------------------
Re: Stihl 034 super
By: 660magnum Date: October 28, 2014, 1:01 pm
---------------------------------------------------------
Pull the starter and look at the pulley?
Rope my be small and pulling through itself?
Pulley pivot shaft hole may be large and the pulley getting off
to one side? A dead give away would be the cone shield that
matches the flywheel will be worn out.
#Post#: 48507--------------------------------------------------
Re: Stihl 034 super
By: Chainsawrepair Date: October 28, 2014, 3:07 pm
---------------------------------------------------------
To easy. Pulley busted. Choke not closing due to the on/off
switch spring sprung. Think I got the spring and switch part.
need to order the other stuff.
Pics loading to Photobucket.
#Post#: 48509--------------------------------------------------
Re: Stihl 034 super
By: Chainsawrepair Date: October 28, 2014, 3:15 pm
---------------------------------------------------------
Neat case he has made for hauling in trunk etc.
#Post#: 48510--------------------------------------------------
Re: Stihl 034 super
By: 660magnum Date: October 28, 2014, 3:17 pm
---------------------------------------------------------
The saw is reasonably clean
#Post#: 48522--------------------------------------------------
Re: Stihl 034 super
By: Al Smith Date: October 28, 2014, 6:07 pm
---------------------------------------------------------
Due to the fact it's a super it's an 036 in different clothes
.Change the rope drum,gut the muffler ,good to go.---says the
guy with one sitting on a table saw for the last 6 months
waiting for some attention ---- ;D
#Post#: 48523--------------------------------------------------
Re: Stihl 034 super
By: 660magnum Date: October 28, 2014, 6:31 pm
---------------------------------------------------------
That would complement my 026PRO
#Post#: 48525--------------------------------------------------
Re: Stihl 034 super
By: Chainsawrepair Date: October 28, 2014, 7:34 pm
---------------------------------------------------------
Weird thing on the media cat info. It list 2 pulleys for 034
etc, one Brazil only and other. 2 different recoils etc. Going
by IPL I would swear this one Brazil.
How can I find where made on saw?
#Post#: 48526--------------------------------------------------
Re: Stihl 034 super
By: 660magnum Date: October 28, 2014, 7:51 pm
---------------------------------------------------------
Non of these were made in USA
Glance over to the 036 and see what it says? They are both the
same series
#Post#: 48529--------------------------------------------------
Re: Stihl 034 super
By: Chainsawrepair Date: October 28, 2014, 8:03 pm
---------------------------------------------------------
LOL I am such a dumbazz' Look at the recoil pic. Made in West
Germany.
[URL=
http://media.photobucket.com/user/SmokeJumperFirearms/media/SMILEYS/HEADSHAKEFA…
*****************************************************
Next Page
You are viewing proxied material from gopher.createaforum.com. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.