Introduction
Introduction Statistics Contact Development Disclaimer Help
Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
Return to: Other dealers online
*****************************************************
#Post#: 10296--------------------------------------------------
The Chainsawr
By: Chainsawr Date: July 16, 2012, 1:59 pm
---------------------------------------------------------
At the chainsawr www.chainsawr.com
http://www.chainsawr.com
we have:
Over 50,000 used parts and in excess of 4000 parts saws on hand
to pick off of. Used parts for: Jonsered, Husqvarna, Stihl,
Olympyk, Efco, Dolmar, Echo, Homelite, Poulan, Mcculloch,
Craftsman, Jobu, Partner, Skil and others.
Every brand of new aftermarket part. Oregon bars and chains,
(we only sell Oregon chain, and we sell a huge volume of it at
excellent prices). Old stock bars from GB and Windsor and
decent Chineese bars.
Logging supplies and accessories.
New Dolmar and Efco chainsaws.
New Dolmar and Efco chainsaw parts and accessories in stock.
Reconditioned used chainsaws.
Reproduction decal and carburetor kits for old saws.
Every kind of chainsaw accessory imaginable: files, chaps,
helmets, wedges, etc.
#Post#: 12120--------------------------------------------------
Re: The Chainsawr
By: yldflight Date: October 10, 2012, 2:20 pm
---------------------------------------------------------
But do you have a Solo 603 piston and cylinder combo - that's
what i really need...
#Post#: 26229--------------------------------------------------
Re: The Chainsawr
By: JasonMester Date: October 27, 2013, 7:23 am
---------------------------------------------------------
Scott, I checked out your website and I am looking for some 441
parts do you have some,or are you going to get some in the
future. Thanks
#Post#: 26264--------------------------------------------------
Re: The Chainsawr
By: jacob j. Date: October 27, 2013, 3:25 pm
---------------------------------------------------------
While we're chirping for parts, I'm after a Homelite 8800 top
end...
#Post#: 26265--------------------------------------------------
Re: The Chainsawr
By: brokenbudget Date: October 27, 2013, 3:36 pm
---------------------------------------------------------
[quote author=jacob j. link=topic=1043.msg26264#msg26264
date=1382905537]
While we're chirping for parts, I'm after a Homelite 8800 top
end...
[/quote]
I think you'll have better luck finding the cure for cancer ;D
#Post#: 26293--------------------------------------------------
Re: The Chainsawr
By: jacob j. Date: October 27, 2013, 10:14 pm
---------------------------------------------------------
[quote author=brokenbudget link=topic=1043.msg26265#msg26265
date=1382906181]
I think you'll have better luck finding the cure for cancer ;D
[/quote]
Most likely, but Tecomec did make a good aftermarket top end for
8800/MP-88 for a number of years. I even had one, NIB, but gave
it away before I ended up with these saws.
I have an idea to convert the 8800 over to 103cc anyway using
some other parts...
#Post#: 26460--------------------------------------------------
Re: The Chainsawr
By: Eccentric Date: October 30, 2013, 5:26 am
---------------------------------------------------------
[quote author=jacob j. link=topic=1043.msg26293#msg26293
date=1382930060]
[quote author=brokenbudget link=topic=1043.msg26265#msg26265
date=1382906181]
I think you'll have better luck finding the cure for cancer ;D
[/quote]
Most likely, but Tecomec did make a good aftermarket top end for
8800/MP-88 for a number of years. I even had one, NIB, but gave
it away before I ended up with these saws.
[B]I have an idea to convert the 8800 over to 103cc anyway using
some other parts...[/B]
[/quote]
That sounds VERY interesting Jacob. PM on the way regarding a
possible source for an 8800 top end.
#Post#: 28019--------------------------------------------------
Re: The Chainsawr
By: hrhunter Date: November 23, 2013, 11:34 am
---------------------------------------------------------
I have a Homelite 8800 top end in good shape. Make an offer.
#Post#: 28363--------------------------------------------------
Re: The Chainsawr
By: Al Smith Date: November 28, 2013, 9:52 am
---------------------------------------------------------
You about have to fire Scott off an e-mail or get him on the
phone .He doesn't check in every site he's on every day .
I'd about bet though given enough time whatever you are looking
for within reason sooner or later he'll find it .Now it might be
a chore to find 10 cubic inch Stihl .
#Post#: 83759--------------------------------------------------
Re: The Chainsawr
By: Chainsawrepair Date: November 30, 2018, 2:19 pm
---------------------------------------------------------
Looks like Scott at chainsawr is selling the business.
https://vermont.craigslist.org/bfd/d/chainsaw-sales-and-service/6760352085.html
*****************************************************
You are viewing proxied material from gopher.createaforum.com. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.