 |
Return Create A Forum - Home |
 |
--------------------------------------------------------- |
|
690 Enduro R |
 |
https://690enduro.createaforum.com |
|
--------------------------------------------------------- |
|
***************************************************** |
|
Return to: GPS and Navigation |
|
***************************************************** |
|
#Post#: 1808-------------------------------------------------- |
|
Mounting possibilities... |
|
By: Colorado Rider Date: September 27, 2014, 11:43 pm |
|
--------------------------------------------------------- |
|
http://www.fy-yff.com/2014/06/ktm-factory-gps-mount.html |
|
http://www.fy-yff.com/2014/06/ktm-factory-gps-mount.html |
|
As listed from KTM-parts |
|
http://www.ktm-parts.com/76012992044.html#.VDlCnWddV8E |
|
http://www.ktm-parts.com/76012992044.html#.VDlCnWddV8E |
|
SW-Motech actually lists a pretty cool mount specifically for |
|
the 690: |
|
http://shop.sw-motech.com/cgi-bin/cosmoshop/lshop.cgi?action=showdetail&wkid=14… |
|
http://shop.sw-motech.com/cgi-bin/cosmoshop/lshop.cgi?action=showdetail&wkid=14… |
|
#Post#: 2267-------------------------------------------------- |
|
Re: Mounting possibilities... |
|
By: Colorado Rider Date: January 3, 2015, 1:49 pm |
|
--------------------------------------------------------- |
|
Garmin Monterra GPS mounting and wiring |
|
1) Get a good waterproof electrical connector, I used the 'NEW |
|
Yiding 5 Kit 2 Pin Way Car Waterproof Electrical Connector Plug |
|
with Wire' that I found on ebay at |
|
http://www.ebay.com/itm/351192178070 |
|
http://www.ebay.com/itm/351192178070. |
|
You need more than one so |
|
that you can make a plug for when the GPS is not connected. |
|
https://lh4.googleusercontent.com/-c8q9QM91GvM/VKhB3oVVLpI/AAAAAAAAAbE/qP2gGS0Z… |
|
2) Find the auxiliary 2 (ACC 2) connector behind the headlight - |
|
just remove the two bolts on the side the hold the cable clips |
|
on. ACC 1 is always on, ACC 2 is only on when the bike is one. |
|
The red is hot and the black is ground (actually black with a |
|
yellow tracer). |
|
https://lh3.googleusercontent.com/-AkOLO-PsCNA/VKhB3-I0BNI/AAAAAAAAAbI/zkCALZ8c… |
|
3) Tie-wrap the female end of the plug to the bike fork - use |
|
another male end as a waterproof plug. |
|
https://lh5.googleusercontent.com/-pl9wYc0oLek/VKhB3mLnhYI/AAAAAAAAAbA/HHKk5yx7… |
|
4) Solder the GPM mount wire to the male end of the plug and |
|
apply an insulator; I used shrink-wrap. |
|
https://lh6.googleusercontent.com/-5aDRe8YhlKY/VKhB4R2r6KI/AAAAAAAAAbM/V5V81hvR… |
|
You don't need the yellow or blue wire to power the GPS, so I |
|
just bent those back under the shrink-wrap. I also cut out the |
|
fuse since the circuit is fused in the fuse box. I did keep the |
|
sound connection though I plan to use bluetooth; just in case I |
|
need it later. |
|
SW Motech GPS mount without GPS |
|
https://lh5.googleusercontent.com/-XaQj_5-8-_Q/VKhB41NebsI/AAAAAAAAAbY/ukV9kG18… |
|
SW Motech GPS mount with GPS |
|
https://lh4.googleusercontent.com/-e7-6h0XcZhU/VKhB5Bim-rI/AAAAAAAAAbc/HBCohc1y… |
|
***************************************************** |
