* * * * *

                    The things I do to configure equipment

[Manually wiring up a serial port] [1] [2]It was a little easier this time
since I wasn't shoving raw wires into the female DE-9 connector [3], but pre-
crimped wires. Still, working out which way the wires go took a few diagrams
to get it straight, so to speak.

[Working out which wires go where] [4] [5] So, for my own notes, the wiring
diagram for the BayTech DS9 [6] with the DS72 [7] module with a roll-over
cable (Smirk, you might want to copy this down):

> BLUE  → pin 4 DE-9
> ORANGE        →
> BLACK → pin 7
> RED   → pin 3
> GREEN → pin 2
> YELLOW        → pin 1
> BROWN → pin 5
> WHITE → pin 8
>

and for a straight through cable:

> BLUE  → pin 8
> ORANGE        → pin 5
> BLACK → pin 1
> RED   → pin 2
> GREEN → pin 3
> YELLOW        → pin 7
> BROWN →
> WHITE → pin 4
>

[1] gopher://gopher.conman.org/IPhlog:2007/06/03/thumb.p6030006.jpg
[2] gopher://gopher.conman.org/IPhlog:2007/06/03/p6030006.jpg
[3] gopher://gopher.conman.org/0Phlog:2006/01/31.2
[4] gopher://gopher.conman.org/IPhlog:2007/06/03/thumb.p6030002.jpg
[5] gopher://gopher.conman.org/IPhlog:2007/06/03/p6030002.jpg
[6] http://www.baytech.net/products/showprod.php?prod=DS9IPS
[7] http://www.baytech.net/products/showprod.php?prod=DS72

Email author at [email protected]

You are viewing proxied material from gopher.conman.org. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.