* * * * *

          Network anomalies at the Facility in the Middle of Nowhere

It's always a fun time when Gregory tries to get his laptop on the network
here. In the past he's made comment that I should run a DHCP (Dynamic Host
Configuration Protocol) server as that makes it easier for him (being a
Windows user where changing the IP (Internet Protocol) address is
inconvenient at best) but given the relatively small number of machines it's
not really needed; unlike where Gregory works where he has to support
hundreds of workstations.

But I've been wanting to play around more with DHCP and make it just a tad
bit easier around here for various friends, now that most of them now have
wireless cards. It proved to be an interesting problem getting DHCP working
here in the Facility in the Middle of Nowhere.

I tested out the DHCP server setup for the Ethernet on my main development
machine and got it working, but I wanted to move it to the central network
computer, janet, an old 486 I use for a firewall and NAT (Network Address
Translation). janet has three NIC (Network Interface Card)s, one for the
cable modem, one for the LAN (Local Area Network) and one for the WAP
(Wireless Access Point); all being in one machine makes it easier to
administrate. So it was a matter of moving the configuration over to janet,
adding a similar setup for the wireless side and everything should work.

But there's that word again: “should.”

Need I say it didn't?

The first problem was Gregory, who couldn't get his wireless network card to
sync up to the WAP here. Going into wardriving mode on my laptop, I could see
my WAP sending out beacon packets, and I could see his card sending out
request packets, but for some reason, his card and my WAP just couldn't see
each other. So I told him he could connect directly with Ethernet (which he
had on his laptop as well).

He then couldn't get an IP address via DHCP.

Given a static IP address and he was able to get onto the network with no
problem. But DHCP wasn't working. The next major problem he was having was
establishing a VPN (Virtual Private Network) connection to his work machine,
presumedly because of the firewall I had set up. Unfortunately, he did not
know which network ports were required to use the VPN connection, and
checking the log files (since I log all traffic to closed ports) didn't tell
us anything.

So I opened up the firewall; more specifically, I disabled the firewall and
let everything through so that shouldn't be a problem.

No dice. He couldn't establish a VPN.

Gregory's computer must not like my network at all.

And I have no idea why DHCP doesn't run on janet.


Email author at [email protected]