SUBJECT: NE0-MYSTIC SPACE BROTHER'S BATTERY FILE: UFO2661
NEO-MYSTIC "SPACE BROTHER'S BATTERY"
Bear in mind, as stated before, the sun sustains a man-made power plant.
The light emanating to your planet is ther all the time even in the dark.
You are not utilizing this energy at all but are rather trying to use the
"heat" factor of the sun. The heat is merely a result of the light rays
and not in itself of any importance except for heat. The heat is caused
by the radiation of the light rays bounding off the magnetic lines of
force. Enough for today.
January 29, 1975
The heat is not present on all the planet except in the daylight because
of the movement of the lines of force as the planet rotates around the
sun. On other planets the heat and light are sustained all the time
because our power supplies rotate with us. But you live in an unnatural
environment which we are all attempting to correct. You need to go back
to your basic elements to recapture the solar force, with a silica base
instead of water. Your small solar batteries are the best technically on
the planet at this time, but they are not right obviously for they need
to be recharged in the direct light of the sun. You see, these are using
only the visible light and no the invisible light or the magnetic force.
Yes, we will be allowed to use the magnetic force within your own planet
- just not for interplanetary purposes until your people turn back to the
Law.... The energy will be used through a battery. Yes, we will satill
call it a magnetic battery, and it does use bismuth, selenium, ferrite,
silica, and manganese. These will utilize the light, magnetics and
gravity, which are your three forces at this time. This is a similar
energy force to the power that operates our ships, except that you don't
use the time factor. There will be a transformer need also...
Beginning new data regarding Earth energy...
To continue with the light energy: We are going to build a dynamo, a
generating system capable of supplying quiet, clean energy to operate an
average upper middle class American home, to supplky 10 to 12 thousand
Watts of energy per about one square foot of space. This unit must not
be under cover. The unit is in two parts: a battery and a transformer,
and can be designed to plug on to the outer power connection so your
current wiring is not necessarily obsolete. First of all, for those of
you who remember the "Smith" antenna, received by Wilbur Smith of Canada
(who is now part of this group, by the way) [deceased], let me make a
correction. This was not an antenna, but a transformer - which is why we
could not complete the tests at that time [1953?]. This Ferrous Fe2 rod
is the basis of our transformer system. We will use a piece one inch in
diameter, one foot long to begin. There is a difference in the ferrite
rods in densitiy. We need a .16 or .18 density rod. Drill two 1/16
holes in top of Ferrite rod, making sure they are separated for
insulation. Drill 1/2 inch deep and insert one copper connection, using
epoxy or other glue if necessary to hold in ferrite. Make sure end of
copper connects with ferrite. Insert conector of clear plastic coated
silver rod in other hole. Clear plastic is necessary to allow the light
to flow. OK Now do the same to the other end of the rod. Back later...
January 31, 1975
Before continuing with the power plant, I wish so assure you that the
nuclear power plants are not the answer. They are spilling more waste
than even the knowledgeable people realize. However, these units aren't
nearly as harmful as the new "clean" weapons and machines that are being
tested and, in some instances, even used. We are restoring as much of
this waste as possible [Footnote A]. It is still a slow process at this
time. Again, let me state this is a fairly new technical problem to us.
For every society such as yours has its own individual problems in the
technical area. So much depends on how the so-called fission is
released. Don't despair. We are working to restore this awesome damagea
and, hopefully we can solve your energy problems before long. It has not
been possible to do this, politically, up until now, but it is felt that
with the fear of no power very imminent, together with the new freedom of
speaking, that it is safe for you to proceed.
February 15, 1975
The battery itself is completely non-metallic. That is, you must not use
metal covers as you do now. We will use simple old cardboard to begin.
Then, of course, we can switch to plastic for production purposes. The
ends need to be clear transparent. For experimental purposes you can
simply use your transparent plastic wrap. The battery is formed in
layers. The Bismuth and Selenium are mixed. To make a small battery -
take 10 gr (1/4 oz.) selenium oxide SeO2 and mix with two parts BiPh4.
Place in bottom layer of cylinder. Cylinder is to be made of cardboard
or inert plastic with both ends clear transparent. Place Bi and Se
mixture - mix thoroughly with glass or wooden rod. Do not use metal.
Place layer of clear inert plastic or clear paper over Bi and Se mix.
Fill with Ferrous fine pulverized Fe3O2 and place clear plastic over the
other layer of BiSe mix at other end. Both ends are the same with
ferrous in between. Use copper wire 1/16 diameter for positive terminal.
Push through top half way down into ferrous. Use aluminum for negative
terminal same dimension and same distance. On bottom attach small thin
lead rod into the bottom layer of BiSe. (No more came through
regarding...)
Tech. Bulletin No. 1 (cont'd) 3.
October 30, 1975
(To **** Relax and let me through.) I truly want to give you the
complete information on how to build a solar energy system. We have
parts of it recorded there, but now I will try this method. First, let
me reiterate, we will utilize light rays. Also used are your magnetic
lines of force. We will make this unit in two parts, a cell, or battery,
and a transformer. The transformer activates the battery with a
perpetual source of energy, thus eliminating any moving parts or liquid.
October 31, 1975
The transformer is made with ferrite rod, winding, for those of you who
remember, in a fashion similar to the Wilbur Smith antenna. I will
describe this. The rod becomes a transformer instead of an antenna as
previously believed. The winding of the wire around the rod captures the
magnetic lines of force in a fashion so far unknown on your planet.
Using one 1/8 inch copper and one 1/8 inch silver or silver coated wire,
wind as below. OK to place transformer A on top of Battery B. [See file
BAT_ATD.TIF,PCX,etc.]
Bring both wires back to both terminals, leaving one end one fourth bare
except for straight ends. Leave silver terminal on bare end. With 1/8
inch wire use 1/2 inch ferrite rod, and, since battery underway is 8
inches long, suggest 8 inch rod for ease of handling. Longer is OK but
not shorter. Wind 6 turns per inch for 6 inches, then straight. Put
both straight wires on the silver terminal. This we will call negative -
Cu plus. The terminals need to 1/4 inch round wire, drilled 1/2 inch
into rod and set firmly with plastic glue into rod center.
The battery is to made in a clear plastic container. In this case we are
using a container approximately 8x4x1. We use clear plastic for purposes
of non-interference. Opacity in any color will block the invisible light
or color rays, which we are using. (Cardboard or paper does not block
these rays if made from wood.) The transformer connects to the battery
at the Al terminal in the center. Connect with Ag covered wire from Ag
and Cu to Cu on transformer. Wire length from transformer to battery not
important - just ease of handling. Smae diameter needed as transformer.
The transformer connects only to the battery, supplying the starting
energy.
The battery is a horizontal sandwich consisting of 5 separate layers
separated by fish paper. The 3 terminals are subsequently run through
parts of the sandwich. Bottom layer and top layers are the same: BiSeO2.
This accepts the light rays which are unseen and activates with the
ferrous which is magnetic. Layer 2 is Fe2O3, layer 3 is MgO2, and layer
4 in manganese (crushed). Terminal 1, Cu goes to layer 5, contacting all
five layers. Terminal 2, Al, connects to layer 3, contacting 3 layers
and terminal 3, Ag, simply connects to layer 1. Battery terminals need
to be round also for greater response. These should be 1/4 inch
diameter. It is more efficient power-wise to keep terminals apart. The
larger the battery the less this is necessary but for now suggest
separate. We are also utilizing the area of the field, which we will
discuss later. As you experiment of course you will try different forms
and shapes for more efficient service, but I believe this is the most
efficient way to prove the theory.
November 7, 1975
Output 250 watts, 1000 cps. Don't be misled: the cps are different from
your measurements but can be utilized with your light bulbs and other ac
equipment. The current flows in a circular motion since it utilizes the
light, color and magnetic rays. This method will not burn out any
equipment for there is no overload possible. It flows off. The
manganese and the Fe2O3 both have magnetic properties. By exciting these
two chemicals through the terminals a force is set up that is almost
perpetual motion. The energy measured in Watts is directly related to
the surface area of the BiSe which absorbs the invisible light energy and
the area of the terminals connected to the chemicals in each layer. See
drawings. Back later.
DECL************ 4.
Footnote A: Crossreference to Green glowing UFOs that deionize the
radioactivity in our atmosphere. After a certain amount of flight within
our atmosphere they are expended and crash into the deeper parts of the
oceans. [-ed.]
SOURCES for Above Material:
1. REX RESEARCH, POB 19250, Jean, NV 89019.
2. Borderland Science, POB 429, Garberville, CA 95440
3. Retyped by PEA RESEARCH, 9638 Soaring Oaks Dr., Elk Grove, CA 95758.
(12/92)
**********************************************
* THE U.F.O. BBS -
http://www.ufobbs.com/ufo *
**********************************************
