SUBJECT: ON SHOOTING SLIDES FROM VIDEO TAPE FILE: UFO1612
MUFONET-BBS NETWORK
~~~~~~~~~~~~~~~~~~~~~
MAKING SLIDES FROM VCR VIDEO TAPE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To All:
During an exchange of letters concerning the MUFON Updated Slide Set, State
Section Director George Reynolds, Elkton, MD [who is also active on the
MUFON-Ham Net] offered the following information concerning his experiences on
making slides from VCR tapes.
Listed below are his findings:
I made some slides from a VCR tape, first time set camera up on a tripod,
used Ektachrome - ASA 100 - shutter speed f/8, time (I used three exposures to
be sure) 1 second, 1/2 second, 1/4 second. The outcome was;
1 second: is great!
1/2 second: good
1/4 second: usuable
I stopped the VCR on the picture I wanted [VCR is a 4-head unit]. On one
picture it would not sinc properly, so I stepped down to f/5.6, time 1 second,
with the VCR running, and obtained a good picture.
Among the slides I made were from "E.T. Wants To Go Home" with E.T.
touching boy's nose-got beautiful shot on slide on this.
Thought I would pass this information to you.
Best Wishes,
George Reynolds
State Section Director - Elkton, MD
Regards, John Komar
Administrator - MUFONET-BBS Network
State Director/Tennessee-MUFON
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
**********************************************
* THE U.F.O. BBS -
http://www.ufobbs.com/ufo *
**********************************************