1/25/95 12:04:41 PM Opening �ISDN FAQ 1/25/95� for recording.

Newsgroups: comp.dcom.isdn,comp.answers,news.answers,alt.internet.services
Path: newsbf01.news.aol.com!newstf01.news.aol.com!uunet!news.sprintlink.net!mv!fastball.unimaster.com!cherkus
From: [email protected] (Dave Cherkus)
Subject: comp.dcom.isdn FAQ Part 1 of 5: Introduction, Etc.
Approved: [email protected]
Keywords: ISDN FAQ telecom
Originator: [email protected]
Distribution: world
Message-ID: <[email protected]>
Nntp-Posting-Host: fastball.unimaster.com
Sender: [email protected] (System Administrator)
Supersedes: <[email protected]>
Reply-To: [email protected] (Dave Cherkus)
Expires: Thu, 9 Feb 1995 01:23:47 GMT
Summary: This posting contains a list of Frequently Asked
        Questions (and their answers) about ISDN.
Organization: UniMaster, Inc.
Date: Thu, 12 Jan 1995 01:27:06 GMT
Followup-To: comp.dcom.isdn
Lines: 276
Xref: newsbf01.news.aol.com comp.dcom.isdn:7725 comp.answers:6080 news.answers:18977 alt.internet.services:25719

Archive-name: isdn-faq/part1
Last-modified: $Date: 1995/01/12 01:18:39 $
Version: $Revision: 4.2 $

------------------------------

1.01) Summary of changes from the last version

 - MS Telematica vendor info from [email protected]
 - alt.internet.servicess to posting list, per request of
   [email protected] (Andy Burgess)
 - Info about getting the NIUF ASI ISDN programming interface
   documentation, courtesy of [email protected] (Vance Shipley)
 - Pointer to ISDN Web page from [email protected]
   (Daniel R. Kegel)
 - MERGE Technologies Group vendor info from [email protected]
 - Vendor info for Apple-oriented ISDN solutions from
   [email protected] (Clauss, Chris)
 - Touched up discription of ISDN availability in intro section,
   input from Tilman Schmidt <[email protected]>
 - A whole new section on SGI, courtesy of [email protected]
   (Michael Wang)
 - Update for Adtran info courtesy of Kevin Schneider <[email protected]>
 - CSI vendor info courtesy of [email protected] (Mike Beyries)
 - Info about getting ISDN in Canada from Peter Graw <[email protected]>
 - Updated NT-1 info from [email protected] (Oliver Jones)
 - TPI vendor info and general FAQ advise from [email protected]
   (Mark Linimon)
 - diehl info update from [email protected] (Uwe Huebner)
 - Info about "The ISDN Literacy Book" from [email protected]
 - HP product info from [email protected]
   (Pierre Vidalenc)
 - Corrected info about getting the faq via e-mail
 - Intel info from [email protected] (Dag Johansen Esq.) and
   [email protected] (Marjorie Panditji)
 - Vendor info about Conware GmbH from [email protected] (Roland Knapp)
 - Gandalf update from [email protected] (Jennifer Steinberg)
 - Numerous corrections of e-mail addresses, typos, etc.
------------------------------

1.02) comp.dcom.isdn Frequently Asked Questions - Introduction

These questions and answers have (almost entirely) been extracted from
comp.dcom.isdn.  Please post any comments or new material that you
have, or email them to the current FAQ editor, [email protected].
In particular, the vendor equipment chart is incomplete.  If you want
to share vendor equipment info, just cut and paste the headers from the
chart below and create a new entry for the new information, and send it
to me.

This FAQ consists almost entirely of information posted to this group.
There are a fair number of holes and there may be some outdated
information in it.  There is no claim of completeness or guarantee of
accuracy of any kind, or no warranties for merchantability or fitness
for a particular purpose.  If you have some useful information that you
would like to share, email it to me.  My goal is to have the FAQ mirror
the information provided to the newsgroup itself.  The next-to-last
section of this FAQ gives references that provide much more information
than this FAQ does.

This FAQ is posted biweekly to the comp.dcom.isdn news group with an
expiration period of two weeks.  This FAQ is available via anonymous ftp
to host rtfm.mit.edu, in the directory /pub/usenet/news.answers/isdn-faq.
It's also accessible via the e-mail server -- send the command
"send usenet/news.answers/isdn-faq/*" (without the quotes) in the body
of a e-mail message to [email protected].  It is also available
via any other site that shadows news.answers.  Some of these sites
are:

   North America: ftp.uu.net                     /usenet/news.answers
   Europe:        ftp.uni-paderborn.de           /pub/FAQ
                  ftp.Germany.EU.net             /pub/newsarchive/news.answers
                  grasp1.univ-lyon1.fr           /pub/faq
                  ftp.win.tue.nl                 /pub/usenet/news.answers
                  ftp.sunet.se                   /pub/usenet
   Asia:          nctuccca.edu.tw                /USENET/FAQ
                  hwarang.postech.ac.kr          /pub/usenet/news.answers

If you have Web access, I recommend you access Dan Kegel's ISDN Web
page at http://alumni.caltech.edu/~dank/isdn/, which has even more ISDN
information and a pointer to a Web-accessible copy of this ISDN FAQ.

I would like to thank Sean Welch for creating the previous edition
of the FAQ.  His work is still responsible for the majority of the
information gathered here.  I hope to continue the fine example that
Sean has set.

------------------------------

1.03) Table of Contents

Section 1:

Subject: 1.01) Summary of changes from the last version
Subject: 1.02) comp.dcom.isdn Frequently Asked Questions - Introduction
Subject: 1.03) Table of Contents
Subject: 1.04) To Do List
Subject: 1.05) Who do I have to thank for this list?

Section 2:

Subject: 2.01) What is ISDN?
Subject: 2.02) What does an ISDN network connection look like?
Subject: 2.03) What will Basic Rate (2B+D) ISDN look like in my house/office?
Subject: 2.04) What is a NT1?  Who sells them?
Subject: 2.05) Can the existing local loop lines be reused for ISDN?
Subject: 2.06) How does this compare to regular phone lines?
Subject: 2.07) Is caller ID available on ISDN?
Subject: 2.08) What do I get above and beyond plain old telephone service?
Subject: 2.09) What do ISDN phones cost?
Subject: 2.10) Can you use existing telephone equipment with the voice portion?
Subject: 2.11) What is National ISDN?
Subject: 2.12) What is the NIUF?
Subject: 2.13) What is ATM?
Subject: 2.14) What is B-ISDN?
Subject: 2.15) What is BONDING?
Subject: 2.16) Data Encapsulation for IP over ISDN
Subject: 2.17) Full Motion Video over ISDN
Subject: 2.18) What is a SPID? How come my ISDN device won't work without one?
Subject: 2.19) Will ISDN terminal equipment that works in one country
              work properly when it is installed in another country?
Subject: 2.20) Will ISDN terminal equipment that works with one vendor's ISDN
              switch work properly when used with another vendor's switch?
Subject: 2.21) Do different manufacturers' Terminal Adaptors interoperate when
              used asynchronously?
Subject: 2.22) Why do I get only about 19.2k throughput from my TA?
Subject: 2.23) How long should call setup take when using a TA?

Section 3:

Subject: 3.01) How do I find out about getting ISDN in my area?

Section 4:

Subject: 4.01) Where can I find what all of these acronyms mean?
Subject: 4.02) What are the relevant standards?
Subject: 4.03) Where can I read more?
Subject: 4.04) Can I get on-line National ISDN information from Bellcore?

Section 5:

Subject: 5.01) Who is shipping what?
Subject: 5.02) How about that SPARCstation 10?
Subject: 5.03) How about that IBM Waverunner?
Subject: 5.04) How about that SGI?
Subject: 5.05) How about that HP?
Subject: 5.06) How about that Intel RemoteExpress?

------------------------------

1.04) To Do List

   Questions for which I have not yet put together an answer, but for which I
   am accepting suggestions:

    a) What programming API's are useful for creating ISDN applications?
       (e.g. Sun, Microsoft TAPI, NIUF ASI, ETSI(?), CAPI(?), more(?))
       What are their strengths and weaknesses?

------------------------------

1.05) Who do I have to thank for this list?

Lots of people, in one way or another.

[email protected] (Dave Yost)
[email protected] (Clauss, Chris)
[email protected] (Eric Boll)
[email protected]
[email protected] (Helge Oldach)
[email protected] (Jim Rees)
[email protected]
[email protected] (Gary C. Kessler)
[email protected] (Peter M. Weiss)
[email protected] (Pierre Vidalenc)
[email protected] (Mathias Gaertner)
[email protected] (Alan Palmer Stephens)
[email protected] (Art Berggreen)
[email protected] (Albert Willis)
[email protected] (Gerhard Bernot)
[email protected] (Mike Beyries)
[email protected] (Ben Harrell)
[email protected] (Michael Klein)
[email protected] (Bob Larribeau)
[email protected] (Bob Clemmons)
[email protected] (Carsten)
[email protected] (Dave Cherkus)
[email protected] (Cliff Frost)
[email protected] (Craig Partridge)
[email protected] (Chuck Storry)
[email protected] (Curt Welch)
[email protected] (Dag Johansen Esq.)
[email protected] (Daniel R. Kegel)
[email protected] (David L. Markowitz)
[email protected]
[email protected] (David E. Martin)
[email protected] (Dror Kessler)
[email protected] (Dwight Ernest)
[email protected] (Greg Earle - Sun JPL on-site Software Support)
[email protected] (Winston Seah)
[email protected] (Eric A. Litman)
[email protected] (Torsten Lif)
[email protected] (Ed Sznyter)
[email protected] (Jim Fenton)
[email protected] (Gary Martin)
[email protected] (Giles Heron)
[email protected] (Greg Larson)
[email protected] (Fred R. Goldstein)
[email protected] (Brad Huntting)
[email protected] (James - The Keeper)
[email protected] (Jerry Scharf)
[email protected] (Jeffrey Fritz)
[email protected] (Jamie Honan)
[email protected] (Jonathan I. Kamens)
[email protected] (Joe Smith)
[email protected] (Rob Jordan)
[email protected] (Jennifer Steinberg)
[email protected] (Jim Breen)
[email protected] (Tom Kessler)
[email protected] (Ketil Albertsen,TIH)
[email protected] (Kevin Schneider)
[email protected] (Kevin Davis)
[email protected] (Kevin Collins)
[email protected] (Dave Evans)
[email protected] (Kevin Paul Herbert)
[email protected] (Kevin J. Rowett)
[email protected] (Roland Knapp)
[email protected] (Mark Linimon)
[email protected] (Laurence V. Marks)
[email protected] (Marjorie Panditji)
[email protected] (Marco S Hyman)
[email protected] (Marc Evans)
[email protected] (Mark Anderson)
[email protected] (Mike Sanders)
[email protected] (Mike Souryal)
[email protected] (Ming Sun)
[email protected] ()
[email protected] (Juergen Ernst Guenther)
[email protected] (Michael Wang)
[email protected] (Oliver Jones)
[email protected] (Carl Oppedahl)
[email protected] (Gerald L. Hopkins)
[email protected] (Peter Graw)
[email protected] (Paul Antoine)
[email protected] (Peter Ilieve)
[email protected] (Patton M. Turner)
[email protected] (Rachel Willmer)
[email protected] (Randolph A. Sisto)
[email protected] (Rob Davies)
[email protected] (Russell Lang)
[email protected] (Wade T. Rogers)
[email protected] (Ronnie B. Kon)
[email protected] (Sanjay Manandhar)
[email protected] (Scott Colwell)
[email protected] (Scott Turner)
[email protected] (Keith Sklower)
[email protected] (winston (w.l.) sorfleet)
[email protected] (Joe Ilacqua)
[email protected] (stamp,scott)
[email protected] (Tilman Schmidt)
[email protected] (Toby Nixon)
[email protected] (Andrew Scherpbier)
[email protected] (Uwe Huebner)
[email protected] (Al Varney)
[email protected] (Vance Shipley)
[email protected] (Sven De Kerpel)
[email protected] (David Lesher)
[email protected] (Sean N. Welch)
[email protected] (sohl,william h)
[email protected] (William Martin)
[email protected] (Andreas Frackowiak)
--
Dave Cherkus ----- UniMaster, Inc. ----- Contract Software Development
Specialties: UNIX TCP/IP X OSF/1 AlphaAXP AIX RS/6000 Performance ISDN
Email: [email protected]  Tel: (603) 888-8308  Fax: (603) 888-8308
if (cpu.type == PENTIUM && cpu.step < 8)   { panic("Intel Inside!"); }


Newsgroups: comp.dcom.isdn,comp.answers,news.answers,alt.internet.services
Path: newsbf01.news.aol.com!newstf01.news.aol.com!uunet!news.sprintlink.net!mv!fastball.unimaster.com!cherkus
From: [email protected] (Dave Cherkus)
Subject: comp.dcom.isdn FAQ Part 2 of 5: General Topics
Approved: [email protected]
Keywords: ISDN FAQ telecom
Originator: [email protected]
Distribution: world
Message-ID: <[email protected]>
Nntp-Posting-Host: fastball.unimaster.com
Sender: [email protected] (System Administrator)
Supersedes: <[email protected]>
Reply-To: [email protected] (Dave Cherkus)
Expires: Thu, 9 Feb 1995 01:23:47 GMT
Summary: This posting contains a list of Frequently Asked
        Questions (and their answers) about ISDN.
Organization: UniMaster, Inc.
Date: Thu, 12 Jan 1995 01:27:40 GMT
References: <[email protected]>
Followup-To: comp.dcom.isdn
Lines: 1025
Xref: newsbf01.news.aol.com comp.dcom.isdn:7726 comp.answers:6081 news.answers:18978 alt.internet.services:25720

Archive-name: isdn-faq/part2
Last-modified: $Date: 1995/01/12 01:18:39 $
Version: $Revision: 4.2 $
------------------------------

2.01) What is ISDN?

ISDN stands for "Integrated Services Digital Networks", and it's a
ITU-T (formerly CCITT) term for a relatively new telecommunications
service package.  ISDN is basically the telephone network turned
all-digital end to end, using existing switches and wiring (for the
most part) upgraded so that the basic "call" is a 64 kbps end-to-end
channel, with bit-diddling as needed (but not when not needed!).
Packet and maybe frame modes are thrown in for good measure, too, in
some places.  It's offered by local telephone companies, but most
readily in Australia, Western Europe, Japan, Singapore, and portions
of the USA, and with other portions of USA asomewhat more behind.
In France, ISDN is known as "RNIS".

[email protected] (Winston Seah)
[email protected] (Fred R. Goldstein)
[email protected] (Paul Antoine)
[email protected] (Tilman Schmidt)
------------------------------

2.02) What does an ISDN network connection look like?

A Basic Rate Interface (BRI) is two 64K bearer ("B") channels and a single
delta ("D") channel.  The B channels are used for voice or data, and the D
channel is used for signaling and/or X.25 packet networking.  This is the
variety most likely to be found in residential service.

Equipment known as a Terminal Adapter (TA) can be used to adapt these
channels to existing terminal equipment standards such as RS-232 and
V.35.  This equipment is typically packaged in a similar fashion to
modems, either as standalone units or as interface cards that plug into
a computer or various kinds of commmunications equipment (such as
routers or PBXs).  TAs do not interoperate with the modem; they
replace the modem.

There may be cases where there is no need to interface to existing
terminal equipment or to emulate exisiting terminal equipment, or there
may equipment with synchronous interfaces present. In these cases,
standalone units or computer interfaces can provide high speed
synchronous connections to the B channels without converting to an
asynchronous standard.

Another common type of equipment can be used to implement a bridge
between local area networks using the ISDN channel to transport the
data.  These devices typically provide features such as demand
dialing and/or data compression.

Of course, more traditional devices such as telephones and fax machines
can be attached to the BRI, assuming they have the proper interface
hardware and software.

Another flavor of ISDN is Primary Rate Interface (PRI). Inside North
America and Japan, this consists of 24 channels, usually divided into
23 B channels and 1 D channel, and runs over the same physical
interface as T1. Outside of these areas the PRI has 31 user channels,
usually divided into 30 B channels and 1 D channel and is based on the
E1 interface.  It is typically used for connections such as one between
a PBX (private branch exchange, a telephone echange operated by the
customer of a telephone company) and a CO (central office, of the
telephone company) or IXC (inter exchange carrier, a long distance
telephone company).

[email protected] (Kevin Collins)
[email protected] (Dave Evans)
[email protected] (Andrew Scherpbier)
[email protected] (Dave Cherkus)
[email protected] (Oliver Jones)
[email protected] (Gary C. Kessler)
------------------------------

2.03) What will Basic Rate (2B+D) ISDN look like in my house/office?

An ISDN BRI U-Loop is 2 conductors from the CO (telephone company
central office) to the customer premises.  Its maximum length may be
5.5 km (18000 ft).  The equipment on both sides of the U loop has to be
carefully designed to deal with the long length of the U loop and the
noisy environment it operates in.

At the customer premises the U-loop is terminated by an NT1 (network
termination 1) device.  The NT1 drives an S/T-bus which is usually 4
wires, but in some cases it may be 6 or 8 wires.  In these optional
cases, the extra wires are used provide power to operate telephones
when normal power fails.  Alternately, 'phantom' power may be derived
from the standard four wires.  Outside of North America emergency mode
operation provides power for basic voice service only in the case of
loss of local power.  In emergency mode operation the NT1 receives up
to 1.2W from the central office. In North America there is no provision
for emergency mode operation.

The name of the S/T bus comes from the letters used in the ISDN
specifications used to refer to two reference points, S and T.  Point T
refers to the connection between the NT1 device and customer supplied
equipment.  Terminals can connect directly to NT1 at point T, or there
may be a PBX (private branch exchange, i.e. a customer-owned telephone
exchange).  When a PBX is present, point S refers to the connection
between the PBX and the terminal.  Note that in ISDN terminology,
"terminal" can mean any sort of end-user ISDN device, such as data
terminals, telephones, FAX machines, etc.

This picture shows what a residential ISDN connection looks like.

               Point T               Point U   |
   +--------+ 4-8 wires +-------+   2-4 wires  |
   |Terminal|-----+-----|  NT1  |-------------[| wall (to telco CO)
   +--------+     |     +-------+              |
   +--------+     |                            |
   |Terminal|-----+
   +--------+     |
                  :
   +--------+     |
   |Terminal|-----+
   +--------+

The T bus is a multipoint bus in this configuration.  It is sometimes
called the passive bus because there are no repeaters on the line
between the NT1 and the devices.  It can be implemented using the same
cable and connectors as is 10 base T Ethernet.  There may be up to 8
devices on the S/T bus.   The bus may be formed with splitters and T
connectors - it is a bus, not a star.  The D channel is used to control
the attachment of the one to eight devices to the two B channels.  No
two devices attach to the same B channel at the same time.

In this configuration, the major function of the NT is to allow more
than one device to have access to the 2 B channels provided by the ISDN
BRI.  For instance, you may have an ISDN telephone, an ISDN fax and an
ISDN computer interface attached to the BRI.  Each device can listen
for calls and only connect to a B channel when it identifies a message
requesting a service it can provide.

The NT1 only implements part of the channel sharing scheme; the other
devices participate as well, and the communication protocol used by the
NT1 and the other devices is an integral part of the scheme.  The NT1
also performs other functions; it translates the bit encoding scheme
used on the lines between it and the telephone company (the U loop) to
the encoding used between it and the devices.  These schemes are
different because the device to NT encoding was designed to enable
channel sharing whereas the NT to telco encoding was designed to allow
transmission across long distances.

In the United States, the customer pays for the NT device, so don't
forget to include the cost of this unit in your cost estimates, or if
you don't need the multiple device attachment feature, try to find a
device that does not require the NT device (i.e. it attaches directly
to the U loop).  If you are not in the United States the telephone
company provides the NT device, but remember there is no such thing as
a free lunch - you are probably paying for it through increased rates,
or increased taxes, etc. (flames to sci.economics or alt.talk.politics).

Unfortunately, the NT1 is not an inexpensive device.  It has to convert
between the signalling used on the U loop (which is operates over long
distances (5.5 km, 18000 ft) in a noisy environment and does not have
to deal with contention between devices) and the signalling of the S/T
bus (which operates over shorter distances in a quieter environment but
it does have to deal with contention between devices and other protocol
functions).  It also provides diagnostic functions such as loopback
mode, and it may have to provide power, as descibed above.

This picture shows what an ISDN connection looks like when a PBX is
present.

               Point S             Point T             Point U   |
   +--------+ 4-8 wires +-------+ 4-8 wires +-------+ 2-4 wires  |
   |Terminal|-----------|  NT2  |-----------|  NT1  |-----------[| wall
   +--------+           | (PBX) |           +-------+            |
               Point S  +---+---+                                |
   +--------+ _________/    |
   |Terminal|/              | Point S
   +--------+               |
                        +---+----+
                        |Terminal|
                        +--------+

In this configuration, the wires at points S and T are point-to-point
links.  Electrically, the S and T points are the same, which is why the
name S/T bus is almost always used.  This makes sense; the terminal
should see the same physical interface whether it is hooked up with or
without a PBX.  But, logically they are different.  The telephone
company needs to know that there is a PBX between itself and the user
so that it can coordinate its efforts with the PBX.  So, in cases where
the difference is important, the specifications use the S and T
terminology.

When there is no PBX in the configuration, the NT1 device is usually a
standalone device that is packaged a lot like a modem: in a small box
when there are only a few, and in a rackmount when you need a lot of
them.  In the United States, the customer buys the NT1 but in most of
the rest of the world the telephone company provides the NT1.  When
there is a PBX the rackmounted NT1s are quite common.  Also, when
there is a PBX the use of PRI lines instead of BRI lines is common.

[email protected] (Dave Cherkus)
[email protected] (Cliff Frost)
[email protected] (Curt Welch)
[email protected] (Dror Kessler)
[email protected] (Eric Boll)
[email protected] (Greg Larson)
[email protected] (Kevin J. Rowett)
[email protected] (Mark Anderson)
[email protected] (Paul Antoine)
[email protected] ( Patton M. Turner)
ronnie@cis

1/25/95 12:05:38 PM Opening �ISDN FAQ 1/25/95#2� for recording.
co.com (Ronnie B. Kon)
------------------------------

2.04) What is a NT1?  Who sells them?

[ Ed Note: Some may feel that there's a bit of overlap between the
 preceeding sections and this one, but the preceeding sections are
 hard to write without integrating NT1 information and this one
 is so informative and well-written that it can stand on its own
 so I think I should leave it as is.  Comments? ]

Reply:  What's an NT1, why do I need one, and where do I get one?

An NT1 (network terminator 1) is a device which provides an interface
between the two-wire twisted pairs used by telephone companies in
their ISDN Basic Rate (BRI) network and an end-user's four-wire
terminal equipment.  The NT1 also provides power for the terminal
equipment if necessary (most ISDN phones need power from the NT1, but
most data terminal adapters--TAs--don't).

Most ISDN central office equipment (including AT&T 5ESS and Northern
Telecom DMS-100 switches) sends data to your home or office via what's
known in ITU-T lingo as a U interface on a single twisted pair.  The
NT1 hooks up to this twisted pair, and converts the signals from the U
interface to the four-wire S/T interface.  Most terminal equipment
(for example, the IBM Wave Runner add-in-card TA and most telephones)
offers the S/T interface.

In North America, you have to buy and maintain your own NT1 device.
The telephone company offers end-users a U interface.  In Europe and
Japan, the telephone company provides the NT1, owns it, and offers
end-users a S/T interface directly.  In North America, some ISDN
equipment vendors offer devices which connect directly to the U
interface (for example, the Combinet CB160).  If you have one of these
devices, you don't need to buy a separate NT1.  The U interface can't
be built in to the device when it's offered for sale in Europe or
Japan.  (This is unfortunate for vendors, who must build and test
separate products for the relatively small North American market if
they want to offer the convenience of a U-interface.)

Many types of NT1s require an external power supply, although some
include a built-in supply.  There are typically two classes of
external power supplies.  One class provides ten to twelve
watts--enough power for both the NT1 and for the terminal equipment.
The other class provides about two watts--enough power for the NT1
alone.  Many good power supplies offer at least a few seconds of
battery backup, to cover for glitches in line power.

Physically, the NT1 is a little plastic box with LEDs on it which can
be screwed to a wall.  The external power supply (if one is included)
is a typical plug-wart.  If you're using a lot of BRI lines, you can
buy a rack holding a dozen or so NT1s with a built in power supply.

It's a good idea to install your NT1 in a permanent fashion.  If you
unplug the ISDN line (the U interface twisted pair) from the NT1, it
shows up as a sign of line trouble in the central office.  Some
telephone companies respond to this so-called "trouble" by disabling
your ISDN line at the central office, and require you to place a
service call on your analog telephone to get your ISDN service
restored.

All the vendors shown here accept credit card orders and ship
promptly. All the vendors have well-organized telesales operations
with friendly and reasonably knowledgeable sales people. Prices are in
US dollars, as of 10/26/94, for single-unit purchases.  Pricing is
becoming volatile; competition seems to be heating up.

AT&T, Northern Telecom, and Tone Commander NT1s can be ordered from:
          Bell Atlantic Teleproducts
          West Building, Suite 150
          50 E. Swedesford Rd
          Frazer Pa,  19355
          tel +1-215-695-2300  or 800-221-0845

Maker              Description       Part No.    Price
-----              -----------       --------    ------
Northern Telecom   NT1 standalone    IN51000     108.00
Northern Telecom   10w power supply  IN61000      72.00
Northern Telecom   2w power supply   IN61005      36.00
AT&T               NT1U-220          IA51007     276.00
AT&T               NT1U-230          IA51009     165.00
AT&T               10w power supply  IA61000     105.00
Tone Commander     NT1               IT51000     224.00
Tone Commander     2w power supply   IT61000      34.00


Tone Commander offers their own NT1 for sale.  Their sales literature
says it may be used as a drop-in replacement for the AT&T NT1U-220.

  Tone Commander Systems
  4379 150th Ave NE, PO Box 97039
  Redmond WA 98073-9739 USA
  +1 206 883-3600 or 800 524 0024
  fax +1 206 881 7179
  They may refer you to a distributor such as
   Greybar Electric or Bell Atlantic.

Maker              Description       Part No.    Price
-----              -----------       --------    ------
Tone Commander     NT1 standalone    NT1U-220TC  185.25
Tone Commander     Power supply      901034       28.50


Adtran offers their own NT1 products for sale.

   Adtran, Inc.
   901 Explorer Blvd  Huntsville, AL 35806-2807 USA
   +1 205 971 8000
   fax +1 205 971 8030

Maker              Description       Part No.    Price
-----              -----------       --------    ------
Adtran             NT1               NT1 ACE     395.00
Adtran             Power Supply      PS2         150.00
Adtran             Power Kit                      74.00
Adtran             Standalone NT1    NT1/T400    575.00
                  (incl 7W supply)
Adtran             Rackmount NT1     NT1/T400    395.00


IBM sells the RoadRunner, an NT1 device with added value: it can
operate either as a standard NT1 or in extended mode. In extended mode
it provides an intergrated voice terminal adapter and a connection to
which POTS telephone devices (including modems, FAXs, and answering
machines) can be attached. This allow a home POTS line to be replaced
with an ISDN line.

When operating with a DMS-100 switch, one B channel is devoted to the
analog phones and one B channel is devoted to the data terminal
adapter.  When attached to a 5ESS switch, the B channels may be
allocated dynamically. The analog phones may use either B channel that
is available, and the data terminal device may use either or both B
channels.

The device includes a built in power supply and a back up battery,
providing up to 18 hours of on-hook, or 6 hours of off-hook operation
during a local power failure.

    IBM
    800-426-2255
    +1-404-238-2157

Maker              Description       Part No.    Price
-----              -----------       --------    ------
IBM                7845 Network      82G6060     350.00
                  Terminator
                  Extended

Motorola UDS offers the NT100 Network Termination Unit.  This is an
NT1 with added value: a series of diagnostic tests can be chosen via a
front-panel rotary switch.

       Motorola UDS
       5000 Bradford Drive
       Huntsville AL 35805-1993
       +1 205 430 8000
       800 451 2369
       fax +1 205 830 5657

Maker              Description       Part No.    Price
-----              -----------       --------    ------
Motorola UDS       Net. Term. Unit   NT100

Thanks to the following people who helped uncover this information.
[email protected] (Ed Tynan)
[email protected] (Russell Pierce)
"H.A. Kippenhan Jr." <[email protected]>
[email protected]
The people who compiled the NIUF solutions catalog

Special thanks to [email protected] (Oliver Jones) for editing this section.
------------------------------

2.05) Can the existing local loop lines be reused for ISDN?

The ISDN pairs are the same wires as used for regular telephone
service.  If you became an ISDN user at home, the same wire pair that
now provides your telephone service would be used to provide ISDN
(assuming you no longer have the regular line).

Most of the lines do not require any special conditioning.  Yes, if
a line has load coils on it they must be removed, BUT load coils
are usually only found on existing lines that are 15,000 feet or
longer.  As to lines with bridge taps, the 2B1Q line transmission
scheme (not to be confused with 2B + D channelization) is tolerant
of a certain amount of bridge taps and, therefore it is only a minimal
subset of existing lines (lines with bridge taps whose total length is
greater than 3000 feet for the bridge taps) that would require
special "de-conditioning."

With those things as the criteria, (in North America) we find than
generally around 90% or so of existing telephone lines need no
"de-conditioning" in order to be used for ISDN BRI service.

[email protected] (sohl,william h)
------------------------------

2.06) How does this compare to regular phone lines?

The ISDN line may act like two independent phone lines with two numbers.
Depending on the CO equipment, conferencing features etc. may be available
(conferencing in the telephone switch).  BRI ISDN phones can support key-set
features such as you would expect to get on an office PBX like:
    - multiple directory numers per line.
    - multiple lines per directory number.
    - conferencing features.
    - forwarding features.
    - voice mail features.
    - speed call.
    - call park.
    - call pickup.
    - ring again.
    - textual status displays.

[email protected] (Curt Welch)
[email protected] (Greg Larson)
------------------------------

2.07) Is caller ID available on ISDN?

Caller ID (name or number display) may be supported (depending on the
CO setup). The availability of caller ID for residential phones would
depend on the capabilities of the local phone network and legislation
allowing or disallowing caller ID.  The availability of Caller ID
relies on the underlying switching protocol used by the switches
that make up the telephone system (e.g. SS7).

[email protected] (Curt Welch)
[email protected] (Greg Larson)
[email protected] (Gary C. Kessler)
------------------------------

2.08) What do I get above and beyond plain old telephone service?

Plain old telephone service is transmitted between the central office
to your home or office telephone set (or modem, or fax) in analog
form.  At the central office, the analog signal is converted to a
series of digital samples at a rate of 8000 samples per second.  Each
sample is seven or eight bits in length.  As the signals for a
telephone call move around the central office, or between central
offices, they are transmitted in digital form.  Thus, a telephone call
consumes a transmission bandwidth of either 56 or 64 kilobits per
second.  The theoretical (Nyquist) limit for the frequency response of
a signal sampled 8000 times per second is 4kHz.  However, due to
various losses in the telephone system, the frequency response of an
ordinary telephone call is usually quoted as 3.1kHz.  Ordinary
modem-based data transmission uses schemes for encoding data in an
analog signal so it fits in this 3.1kHz bandwidth.  14.4kbps is a
commonly available transmission rate at the high end of the scale.
With this transmission rate, over three-quarters of the bitrate handled
by the central office is wasted.

Notice that in telephony, 64kpbs means 64000 bits per second, whereas
in computer engineering 64k bytes typically means 65536 bytes.

ISDN brings the digital signal all the way to your home or desktop.  With
ISDN, you can place a data call which uses all 56kbps or 64kbps, because
there is no need to convert the signal to analog in your modem and back
to digital at the central office.  The availability of the full bandwidth
presents some interesting technological opportunities:
  -- transmission of high-fidelity compressed audio
  -- transmission of encrypted audio
  -- transmission of lots of data
  -- transmission of other compressed signals, such as video

Basic-rate ISDN (BRI) offers two channels of this service.  In BRI, the
connection between your site and the central office offers 64kbps
bidirectionally on each channel.  Each of these channels may be used
for a voice call, for circuit-switched data, or for X.25 packet
switched data.  Thus, the existing POTS circuit [POTS: Plain Old
Telephone Service, i.e. traditional analog telephony] can be
conditioned to carry two calls at the same time.  (Your mileage may
vary;  you have to specifically order and pay for the various services
from your telephone company, just as you have to order and pay for Call
Waiting for an ordinary phone line.  Also, not all services are
available everywhere; X.25 connectivity between COs is a notable
problem in the Greater Boston area as of 9/93, for example.)

Incidentally, ISDN brings another interesting service to your home or
desktop:  a highly reliable 8000Hz clock signal.  In most cases, the
central office switches, long-distance carriers, and ISDN terminal
equipment all operate with exactly the same clock frequency.  In a
real-time communications environment (like a voice phone call) this
means that there's no need to compensate for differences between the
sampling rates at each end of the call.

One of the other features is that instead of the CO sending an AC ring
signal to activate your bell, it sends a digital packet that tells WHO
is calling (if available), WHAT TYPE of call (speech, datacomm?), the
NUMBER DIALED (maybe one of your aliases) and some other stuff. Your
equipment can then analyze this stuff and make an "intelligent" decision
what to do with it. For example, a phone (with speech-only capacity)
would completely ignore a datacomm call while a Terminal Adapter (ISDN
"modem") or a phone with built-in datacom functions would respond to it.
If you have several "aliases" tied to your line, you can program certain
phones to answer calls for certain numbers only.  Datacomm calls contain
baud rate and protocol information within the setup signal so that the
connection is virtually instantaneous (no messing around with trying
different carriers until both ends match).

[email protected] (Curt Welch)
[email protected] (Torsten Lif)
[email protected] (Oliver Jones)
[email protected] (Helge Oldach)
------------------------------

2.09) What do ISDN phones cost?

The ISDN sets can cost between $180 for an AT&T 8503T ISDN phone from
Pacific Bell up to $1900 depending on what/how many features are needed.

A recent report states that the price is $536.90 for an AT&T 7506 with
the RS-232 port on the back and $102.70 to get the 507A adaptor to hook
analog devices to my 7506.

Recent quotes were "$200" for a Coretelco 1800 and "$600" for a Fujitsu
SRS 1050.

[email protected] (Dave Evans)
[email protected] (Brad Huntting)
[email protected] (Joe Ilacqua)
[email protected] (Scott Turner)
------------------------------

2.10) Can you use existing telephone equipment with the voice portion?

Terminal Adapters (TA'a) are available that will interface non ISDN terminal
equipment (TE), called TE2 to the S/T interface.  At least one RBOC provides
a modem pool to allow for interchange of data with POTS subscribers.  Bellcore
may approve a standard to allow a analog pair to interface to POTS sets from
a NT1.  Also w/o a NT2 only one set can be connected to a B channel at a time.  This prevents 2 sets from participating in the same voice call.

[email protected] ( Patton M. Turner)
[email protected] (Joe Ilacqua)
------------------------------

2.11) What is National ISDN?

Because of the breadth of the international ISDN standards, there are a
number of implementation choices that vendors of ISDN equipment can
make.  Given the number of choices vendors can make, different vendors
equipment may not interoperate.  In the United States, Bellcore has
released a series of specifications to try to avoid these
interoperability problems.  These are the National ISDN
specifications.  Contact the Bellcore ISDN hot line listed below for
more information.

[email protected] (Gary C. Kessler)
[email protected] (Dave Cherkus)
------------------------------

2.12) What is the NIUF?

North American ISDN Users Forum (NIUF) is an org. of ISDN-interested
parties, coordinated by NIST (National Institute of Stds. and Tech.)
Contact:

   NIUF Secretariat
   National Institute of Standards and Technology
   Building 223, Room B364
   Gaithersberg, MD  20899
   (301) 975-2937 voice
   (301) 926-9675 fax
   (301) 869-7281 BBS  8N1  2400 bps

Bellcore has made the PostScript files for "A Catalog of National
ISDN Solutions for Selected NIUF Applications, Second Edition"
accessable via anonymous ftp from the machine info.bellcore.com.
This document has a tremendous amount of information about
ISDN products and vendors, among many other things.  See the item
below for details.

The currently approved documents for the Application Software
Interface (ASI) from the North American ISDN User's Forum (NIUF)
are available via anonymous FTP from dsys.ncsl.nist.gov.  The
documents are in Postscript and found in uncompressed ASCII (foo.ps),
compressed (foo.Z) and zipped (foo.zip) files.

These documents describe the Implementation Agreements made by the
NIUF for an API to ISDN services.

The file sizes are approximate and intended to help determine space
requirements for transfer.

Part 1: Overview and Protocols - Approved: 10/4/91, Updated: 10/30/92
       ~ftp/asi/docs/part1.ps  - 347853 bytes
       ~ftp/asi/docs/part1.Z   - 119655 bytes
       ~ftp/asi/docs/part1.zip -  89545 bytes

Part 2: MS-DOS Access Method - Approved: 6/5/92
       ~ftp/asi/docs/part2.ps  - 146474 bytes
       ~ftp/asi/docs/part2.Z   -  44450 bytes
       ~ftp/asi/docs/part2.zip -  31599 bytes

Part 3: Enhanced DOS/Protected Mode Shell Access Method -
               Approved: June 5, 1992, Updated: 10/30/92
       ~ftp/asi/docs/part3.ps  - 285344 bytes
       ~ftp/asi/docs/part3.Z   -  91273 bytes
       ~ftp/asi/docs/part3.zip -  68331 bytes

Part 4: UNIX Access Method - Approved: 10/30/92
       ~ftp/asi/docs/part4.ps  - 151809 bytes
       ~ftp/asi/docs/part4.Z   -  47765 bytes
       ~ftp/asi/docs/part4.zip -  33465 bytes

For further information regarding these documents please contact
Robert Toense ([email protected]) (phone: +1 301 975 2930).

[email protected] (Dave Cherkus)
[email protected] (Vance Shipley)
------------------------------

2.13) What is ATM?

ATM (Asynchronous Transfer Mode) is a switching/transmission technique
where data is transmitted in small, fixed sized cells (5 byte header,
48 byte payload).  The cells lend themselves both to the time-division-
multiplexing characteristics of the transmission media, and the packet
switching characteristics desired of data networks.  At each switching
node, the ATM header identifies a "virtual path" or "virtual circuit"
that the cell contains data for, enabling the switch to forward the
cell to the correct next-hop trunk.  The "virtual path" is set up
through the involved switches when two endpoints wish to communicate.
This type of switching can be implemented in hardware, almost essential
when trunk speed range from 45Mb/s to 1Gb/s.

One use of ATM is to serve as the core technology for a new set of ISDN
offerings known as Broadband ISDN (B-ISDN).

For more information, read comp.dcom.cell-relay.

This group has a Frequently Asked Questions list;  it is posted
to news.answers and is in various archives as cell-relay-faq.

[email protected] (Art Berggreen)
[email protected] (Dave Cherkus)
------------------------------

2.14) What is B-ISDN?

Broadband ISDN refers to services that require channel rates greater than
a single primary rate channel.  While this does not specificially imply
any particular technology, ATM will be used as the switching infrastructure
for B-ISDN services.

B-ISDN services are categorized as:

   INTERACTIVE
    Conversational -- such as videotelephony, videoconferencing, ...
    Messaging -- such as electronic mail for images, video, graphics,...
    Retrieval -- such as teleshopping, news retrieval, remote education,...

   DISTRIBUTION
    Without user presentation control -- electronic newspaper, electronic
        newspaper, TV distribution
    With user presentation control -- remote education, teleadvertising,
        news retrieval

More information: ITU ITU-T Rec. I.211.

[email protected] (Gary C. Kessler)
------------------------------

2.15) What is BONDING?

An inverse multiplexing method of the Bandwidth ON Demand
INteroperability Group, implemented by most (all?) inverse multiplexor
vendors to interoperate with inverse multiplexors of other vendors.

BONDING is a set of protocols developed by U.S. inverse multiplexor
that supports communication over a set of separate channels as if their
bandwidth were combined into a single coherent channel.  For example it
supports a single 384 kb/s data stream over 6 64 kb/s channels.

The specification defines a way of calculating relative delay between
multiple network channels and ordering data such that what goes in one
end comes out the other.

Most (all?) vendors also have their own proprietary methods that
usually add features and functions not present in BONDING mode 1.  Mode
1 is the mode used for recent interoperability testing between vendors.

Chip Sharp at Teleos has made available electronic copies of the
BONDING (Bandwidth on Demand Interoperability Group) 1.0 and 1.1
specifications.  The specs are available via WWW, gopher, anonymous
FTP, DECnet COPY, and AFS (see instructions below).

The following files are available:

- aaareadme-networks       help file (in ascii text)
- bdmain.doc               main body of BONDING 1.0 specification
                          (Word for Windows 2.0 format)
- bdmain.ps                main body of BONDING 1.0 specification (Postscript)
- bdannex.doc              annex of BONDING 1.0 specification (Word
                          for Windows 2.0 format)
- bdannex.ps               annex of BONDING 1.0 specification (Postscript)
- bd_v1_1.doc              changes for BONDING 1.1 specification (Word
                          for Windows 2.0 format)
- bd_v1_1.ps               changes for BONDING 1.1 specification (Postscript)

Transfer Instructions:

WWW:
   server: www.hep.net
   URL: gopher://www.hep.net:70/11/info_center/networks/bonding

Gopher:
   server: gopher.hep.net
   Bookmark:
   Name=Bandwidth on Demand Interoperability Group (BONDING) Documents
   Type=1
   Port=70
   Path=1/info_center/networks/bonding
   Host=gopher.hep.net

Anonymous FTP:
   server: ftp.hep.net
   directory: networks/bonding

DECnet COPY (only for those on HEP-NSI DECnet):
   HEPNET::[ANON_FTP.NETWORKS.BONDING]

AFS:
   /afs/hepafs1.hep.net/public/anon_ftp/networks/bonding

[email protected] (Marco S Hyman)
"Bob Larribeau" <[email protected]>
"David E. Martin" <[email protected]>
------------------------------

2.16) Data Encapsulation for IP over ISDN

A decision was made at the Amsterdam IETF to state that all systems
wishing to guarantee IP interoperability should implement PPP.  Such
systems may also implement the Frame Relay or X.25 encapsulations, and
an RFC will be published delineating how, when it is known that the
encapsulations are limited to that set of three, they may be
distinguished by examination of the first correctly checksummed and
HDLC bit-stuffed packet.

Many implementations are using PPP so that they can negotiate
compression and/or multilink operation.

There is an Internet Draft from the Point-to-Point Protocol Working
Group of the Internet Engineering Task Force that describes the use of
PPP over ISDN.  This draft is named draft-ietf-pppext-isdn-NN.txt in
the internet-drafts Shadow Directories on nic.ddn.mil, nnsc.nsf.net,
nic.nordu.net, ftp.nisc.sri.com, munnari.oz.au, Germany.EU.net and on
many, many other mirror archives.  This is also discussed in RFC 1356

1/25/95 12:06:07 PM Opening �ISDN FAQ 1/25/95#3� for recording.

by Malis, et. al.

A common practice in most European countries is raw IP packets
delimited by HDLC flags.  Another common practice is an encapsulation
using simple HDLC in layer 1, X.75 (LAPB, usually I-frames) in layer 2
and, sometimes, T.70 in layer 3.  PPP is used instead of HDLC/X.75/T.70
when the network doesn't provide the callers telephone number eg. when
emulating a modem or the callers number is lost on telephone company
borders.  In this case, caller authentication is done via PAP/CHAP
instead.

[email protected] (Keith Sklower)
[email protected] (Dave Cherkus)
[email protected] (Gary C. Kessler)
[email protected] (Juergen Ernst Guenther)
[email protected] (Carsten)
------------------------------

2.17) Full Motion Video over ISDN

In ISDN, video isn't a "service being offered" - at least not for
low/midrange quality. You buy the proper equipment for both
subscribers, plug it in, and place the call. Just like speaking French
on ISDN isn't something being offered - it is something you just do,
yourself.

Video telephony over narrowband ISDN is governed by a suite of ITU-T
(formerly CCITT) interoperability standards.  The overall video
telephony suite is known informally as p * 64 (and pronounced
'p star 64'), and formally as standard H.320.   H.320 is an "umbrella"
standard;  it specifies H.261 for video compression, H.221, H.230, and
H.242 for communications, control, and indication, G.711, G.722, and
G.728 for audio signals, and several others for specialized purposes.
A common misconception, exploited by some equipment manufacturers, is
that compliance with H.261 (the video compression standard) is enough
to guarantee interoperability.

Bandwidth can be divided up among video, voice, and data in a
bewildering variety of ways.  Typically, 56kbps might be allocated to
voice, with 1.6kbps to signalling (control and indication signals) and
the balance allocated to video.

An H.320-compatible terminal can support audio and video in one B
channel using G.728 audio at 16 kb/s.  For a 64 kb/s channel, this
leaves 46.4 kb/s for video (after subtracting 1.6 kb/s for H.221
framing).

The resolution of a H.261 video image is either 352x288 (known as CIF)
or 176x144 (known as quarter-CIF or QCIF).  The frame rate can be
anything from 30 frames/second and down.  Configurations typically use
a 2B (BRI) or a 6B (switched-384 or 3xBRI with an inverse multiplexer)
service, depending on the desired cost and video quality. In a 384kbps
call, a video conferencing system can achieve 30 frames/second at CIF,
and looks comparable to a VHS videotape picture. In a 2B BRI call, a
standard video phone can achieve 15 frames/second at CIF.

Those who have seen the 1B video call in operation generally agree that
the quality is not sufficient for anything useful like computer based
training - only for the social aspect of being able to *see* Grandma as
well as hear her (sort of like the snapshot pictures you make with that
$5 camera with no controls).

A 2B picture, on the other hand, is for all practical purposes
sufficient for remote education, presentations etc. Rapidly changing
scenes are still not very well handled, but as soon as the picture
calms down, the sharpness and color quality are impressive (considering
that only two plain phone channels are being used). With 2B+D being the
standard BRI, this kind of picturephone will be usable "everywhere"
(including private homes).

However, it should still be noted that 6xB or H0 does allow for dramatic
improvement in picture quality compared to 2xB.  In particular, H.320
video/audio applications will often allocate 56kbps for audio, leaving
only 68.8kbps for video when using 2xB.  On the other hand, using H0
would get you 326.4kbps for video with 56kbps for audio. Alternative
audio algorithms can improve picture quality over 2xB by not stealing
as many bits.  Note that 6B is not identical to H0; the latter is a
single channel which will give you 80kbps above that of six separate B
channels.  Inverse multiplexors can be used to combine B channels.

[email protected] (Ketil Albertsen,TIH)
[email protected] (Kevin Davis)
[email protected] (Oliver Jones)
[email protected] (Mike Souryal)
------------------------------

2.18) What is a SPID? How come my ISDN device won't work without one?

SPIDs are Service Profiles IDs.  SPIDs are used to identify what sort
of services and features the switch provides to the ISDN device.
Currently they are used only for circuit-switched service (as opposed
to packet-switched).  Annex A to ITU recommendation Q.932 specifies the
(optional) procedures for SPIDs.  They are most commonly implemented by
ISDN equipment used in North America.

When a new subscriber is added, the telco personnel allocate a SPID
just as they allocate a directory number.  In many cases, the SPID
number is identical to the (full ten digit) directory number.  In other
cases it may be the directory number concatinated with various other
strings of digits, such as digits 0100 or 0010,  1 or 2 (indicating the
first or second B channel on a non-centrex line), or 100 or 200 (same
idea but on a centrex line) or some other, seemingly arbitrary string.
Some people report SPIDs of the form 01nnnnnnn0 for  AT&T custom and
01nnnnnnn011 for NI-1, where n is the seven digit directory number.
It is all quite implementation dependent.

The subscriber needs to configure the SPID into their terminal (i.e.
computer or telephone, etc., not their NT-1 or NT-2) before they will
be able to connect to the central office switch.

When the subscriber plugs in a properly configured device to the line,
Layer 2 initialization takes place, establishing the basic transport
mechanism.  However if the subscriber has not configured the given SPID
into their ISDN device, the device will not perform layer 3
initialization and the subscriber will not be able to make calls.  This
is, unfortunately, how many subscribers discover they need a SPID.

Once the SPID is configured, the terminals go through an
initialization/identification state which has the terminal send the
SPID to the network in a Layer 3 INFOrmation message whereby the
network responds with an INFO message with the EID information element
(ie). Thereafter the SPID is not sent again to the switch. The switch
may send the EID or the Called Party Number (CdPN) in the SETUP message
to the terminal for the purpose of terminal selection.

SPIDs should not be confused with TEIs (terminal endpoint identifiers).
TEIs identify the terminal at Layer 2 for a particular interface
(line).  TEIs will be unique on an interface, whereas SPIDs will be
unique on the whole switch and tend to be derived from the primary
directory number of the subscriber.  Although they are used at
different layers, they have a 1-to-1 correspondence so mixing them up
isn't too dangerous. TEIs are dynamic (different each time the terminal
is plugged into the switch) but SPIDS are not. Following the
initialization sequence mentioned above the 1-to-1 correspondence is
established.  TEIs are usually not visible to the ISDN user so they are
not as well known as SPIDs.

The "address" of the layer 3 message is usually considered to be the
Call Reference Value (also dynamic but this time on a per call basis)
as opposed to the SPID, so the management entity in the ISDN device's
software must associate EID/CdPN on a particular TEI and Call Reference
Number to a SPID.

There are some standards that call for a default Service Profile, where
a terminal doesn't need to provide a SPID to become active.  Without
the SPID however, the switch has no way of knowing which terminal is
which on the interface so for multiple terminals an incoming call would
be offered to the first terminal that responded, rather than to a
specific terminal.

[email protected] (winston (w.l.) sorfleet)
[email protected] (Chuck Storry)
------------------------------

2.19) Will ISDN terminal equipment that works in one country
              work properly when it is installed in another country?

There are four major problem areas.

The first has to do with voice encoding, and is only a problem if the
equipment is a telephone.  Equipment designed for use in North America
and Japan uses mu-law encoding when converting from analog to digital,
whereas the rest of the world uses A-law.  If the equipment has a
switch for selecting one or the other of these encoding types, then
there will not be a problem with the voice encoding.

The second has to do with the way the equipment communicates with the
telephone exchange.  There are interoperability problems because
* there are so many different services (and related parameters) that the
  user can request and
* each country can decide whether or not to allow the telephone exchange
  to offer a given service and
* the specifications that describe the services are open to interpretation
  in many different ways.
So, as with other interoperability problems, you must work with the vendors
to determine if the equipment will interoperate.  This is a basic problem;
it impacts all ISDN equipment, not just voice equipment.

The third has to do with homologation, or regulatory approval.  In most
countries in the world the manufacturer of telephone equipment must
obtain approvals before the equipment may be connected to the network.
So, even if the equipment works with the network in a particular
country, it isn't OK to hook it up until the manufacturer has jumped
through the various hoops to demonstrate safety and compliance.  It is
typically more expensive to obtain world-wide homologation approvals
for a newly-developed piece of ISDN equipment than it is to develop it
and tool up to manufacture it.

A fourth issue is in the US the TA and NT1 are both provided by the
customer, while in Europe the NT1 is provided by telephone company.
Stated differently, if you walk into a store in the US and buy
something to plug into an ISDN line it may be designed as a one-piece
unit that connects to point U.  In Europe you would get something that
plugs into point T.  Thus you might take a piece of US-originated
equipment to Europe and find that it won't work because the jack in
Europe is a T interface and the plug on your US equipment is a U
interface.

There are attempts to remedy this situation, particularly for BRI
ISDN.  In North America, the National ISDN User's Forum is coming
up with standards that increase the uniformity of ISDN services.
In Europe, a new standard called NET3 is being developed.

[email protected] (Ming Sun)
[email protected] (Marco S Hyman)
[email protected] (Jim Breen)
[email protected] (Dave Evans)
[email protected] (Oliver Jones)
[email protected] (William Martin)
[email protected] (Carl Oppedahl)
------------------------------

2.20) Will ISDN terminal equipment that works with one vendor's ISDN
              switch work properly when used with another vendor's switch?

[Ed. Note: The title is edited from the previous faq to try to fit in
 with the preceding question]
[Also, this seems to imply that there are only two implementations
to worry about and it is very US-centric.  This section needs to be
reworked]

When the National ISDN-1 standard is implemented, there will be a single
standard for how TE communicates with the CO (the call setup dialogue).
Until that time, you may encounter two different varieties of CO equipment,
each with its own call setup dialogue:
 * ATT 5ESS
 * Northern Telecom DMS100
Some ISDN TE equipment can be configured to communicate with either;
some works with only one variety.

[email protected] (Jim Rees)
[email protected] (Jerry Scharf)
------------------------------

2.21) Do different manufacturers' Terminal Adaptors interoperate when
              used asynchronously?

There is a standard up to 19.2k (V.110) but above that there is no real
standard implemented. However, in practice there is a fair degree of
interoperability (even when the TA's manual tells you otherwise)
because many TAs use the same chip set (supplied by Siemens) which
happily goes up to 38.4. TAs from different suppliers that are using
the Siemens chips have a fair chance of interoperating at up to 38.4k.

[email protected] (William Martin)
------------------------------

2.22) Why do I get only about 19.2k throughput from my TA?

The problems in using TA's are the same as those in using fast modems.
You only get the throughput that your serial port can handle. The
serial ports of many machines struggle to receive at 19.2k. Sending is
easier to implement efficiently.  Many machines will happily send data
to a TA at 38.4, but choke down to around 19.2k or lower when receiving
(with lots of retries on ZMODEM file transfer).

[email protected] (William Martin)
------------------------------

2.23) How long should call setup take when using a TA?

The "less than a second" call setup sometimes claimed seems to be rare.
TAs have a negotiation phase and it typically takes around 4 seconds
to get through to the remote site.

[email protected] (William Martin)
--
Dave Cherkus ----- UniMaster, Inc. ----- Contract Software Development
Specialties: UNIX TCP/IP X OSF/1 AlphaAXP AIX RS/6000 Performance ISDN
Email: [email protected]  Tel: (603) 888-8308  Fax: (603) 888-8308
if (cpu.type == PENTIUM && cpu.step < 8)   { panic("Intel Inside!"); }


Newsgroups: comp.dcom.isdn,comp.answers,news.answers,alt.internet.services
Path: newsbf01.news.aol.com!newstf01.news.aol.com!uunet!news.sprintlink.net!mv!fastball.unimaster.com!cherkus
From: [email protected] (Dave Cherkus)
Subject: comp.dcom.isdn FAQ Part 3 of 5: Getting ISDN Service
Approved: [email protected]
Keywords: ISDN FAQ telecom
Originator: [email protected]
Distribution: world
Message-ID: <[email protected]>
Nntp-Posting-Host: fastball.unimaster.com
Sender: [email protected] (System Administrator)
Supersedes: <[email protected]>
Reply-To: [email protected] (Dave Cherkus)
Expires: Thu, 9 Feb 1995 01:23:47 GMT
Summary: This posting contains a list of Frequently Asked
        Questions (and their answers) about ISDN.
Organization: UniMaster, Inc.
Date: Thu, 12 Jan 1995 01:27:54 GMT
References: <[email protected]>
Followup-To: comp.dcom.isdn
Lines: 198
Xref: newsbf01.news.aol.com comp.dcom.isdn:7727 comp.answers:6082 news.answers:18979 alt.internet.services:25721

Archive-name: isdn-faq/part3
Last-modified: $Date: 1995/01/12 01:18:40 $
Version: $Revision: 4.2 $
------------------------------

3.01) How do I find out about getting ISDN in my area?

 EURIE contact data:

 Country      Company           name                    tel / fax
 ===========  ================  ======================  ===================
 Austria      PTT Austria       Mr Michael Schneider    +43 1 317 30 39
                                                        +43 1 31 3.13.66.63
 Belgium      BELGACOM          Mr Egied Dekoster       +32 2/213.46.49
                                                        +32 2/921.02.13
 Denmark      Tele Danmark      Mr Soren Christensen    +45 3399 6940
                                                        +45 3314 5625
 Finland      Telecom Finland   Mr Terho Salo           +358 31 243 22 67
                                                        +358 31 243 23 83
 Finland      The ATC Finland   Mr Matti Tammisalo      +358 0 606 35 08
                                                        +358 0 606 33 22
 France       France Telecom    Mr Pascal Meriaux       +331 44 44 53 59
                                                        +331 44 44 75 50
 Germany      DBP Telekom       Mr Volker Fink          +49 6151 83 30 67
                                                        +49 6151 83 50 68
 Greece       OTE               Mrs Vas. Danelli        +30 1 611 89 96
                                                        +30 1 805 20 64
 Ireland      Telecom Eireann   Mr John Lawler          +353 1 790 10 00
                                                        +353 1 677 49 41
 Italy        Iritel            Mr Rocco Gentile        +39 65 494 52 56
                                                        +39 65 94 20 54
 Italy        Itacable          Mr Rolando Bottoni      +39 65 734 45 23
                                                        +39 65 7 34 48 05
 Italy        SIP               Mr Bernardino de Rito   +39 6 36 88 40 38
                                                        +39 6 36 44 88
 Luxembourg   EPTL              Mr Hubert Schumacher    +352 49 91 56 56
                                                        +352 49 12 21
 Netherlands  PTT Telecom       Ms Corinne der Kinderen +31 70 34 32 473
                                                        +31 70 34 39 747
 Norway       Norwegian Telecom  Mr Odd Egil Asen       +47 22 77 71 22
                                                        +47 22 2 0 78 00
 Portugal     TLP                Mr Antero Aguilar      +351 1 147 797
                                                        +351 1 544 796
 Portugal     Telecom Portugal   Mr Jose Brito          +351 1 35  04  710
                                                        +351 1 35 04 197
 Spain        Telefonica Espana  Mr Fernando Moratinos  +34 1 584 96 81
                                                        +341 584 95 58
 Sweden       Telia              Mr Peter Ostergren     +46 8 713 17 99
                                                        +46 8 713 73 62
 Switzerland  PTT Telecom        Mr Jean-Yves Guillet   +41 31 62 72 27
                                                        +41 31 6 2 85 26
 UK           British Telecom    Mr JM Pickard          +44 71 356 89 52
                                                        +44 71 796 91 20
 UK           Mercury            Mr Clive Curt is       +44 71 528 26 35
                                                        +44 71 528 20 66

 Australia:
   Telecom:  008 077 222 (voice), (07) 220 0080 (fax)

 Belgium:

   As from 01/01/94 ISDN is available in belgium on demand. All major
   switching nodes of the national telecom company BELGACOM are digital
   and a very fast increasing number of sub-nodes are converted to digital
   connections. BRA (Basic Rate Access) can be connected in less than a
   week in over 75% of the country. PRA may take longer depending on
   geographical location.  Caller ID is available on ISDN in Belgium
   (using EURO-ISDN = ISDN fase 2 in Belgium) but only between ISDN
   devices although it may be hidden by the caller.

   BELGACOM: departement van de communicatie, ISDN-cel
   paleizenstraat 42 - 4de verdieping
   1210 Brussel
   tel: 078/11.66.77 (free of charge)

 Canada:
   Stentor
   1-800-578-4736 (fax back service)

 Germany:
   Deutsche Bundespost Telekom

   IfN - Ingenierubuero fuer Nachrichtentechnik
   Haidelmoosweg 52
   D - 78467 Konstanz
   Tel: +49 7531 97000-0
   FAX: +49 7531 74998

 United Kingdom:
   British Telecom ISDN Helpdesk
   0800 181514 from within the UK,
   +44 272 217764 from outside.

   Mercury Data Communication
   0500 424194 from within the UK,
   +44 81 914 2335 from outside.

 North America:
   North American ISDN Users Forum (NIUF): see item above

 United States:
   I suggest that you call the local telephone service center office
   and ask for the name and number of the Marketing Product Manager
   for ISDN services.  If the service rep cannot make heads or tails
   of your question, ask to speak to the local service center manager
   for complex business services.  This person should be able to
   direct you to the right place.  For the Bell companies, this
   position is normally part of the telephone company's core marketing
   staff at their headquarters location.

   Ameritech: 800-832-6328

   Bellcore national ISDN information clearing house hotline:
   800 992-4736

   Bellcore's "ISDN Deployment Data", Special Report (SR) 2102.
   Bellcore document ordering: US: 1-800-521-2673, other: 1-908-699-5800

   Bell Atlantic: 800-570-ISDN         (all except New Jersey Bell)
                  1-800-843-2255 x4736 (New Jersey Bell customers)

   BellSouth      1-800-858-9413

   Cincinatti Bell  513-566-DATA

   Pacific Bell:
      800-995-0346 - ISDN Availability Hotline (automated audio response)
      800-662-0735 - ISDN Telemarketing (ordering information)
      800-4PB-ISDN - ISDN service center
   Also, try the gopher servers at gopher.pacbell.com or gw.pacbell.com.

   GTE:   Menu-driven information service at [800] 4GTE-SW5.
          Florida, North Carolina, Virginia, and Kentucky: 1-800-483-5200
          Illinois, Indiana, Ohio, and Penn. 1-800-483-5600
          Oregon and Washington 1-800-483-5100
          California 1-800-483-5000
          Hawaii 1-800-643-4411
          Texas 1-800-483-5400

   Nevada Bell   702-688-7124 (contact Lyle Walters)

   NYNEX: 1-800-438-4736, 800-GET-ISDN, 800-698-0817 or 212-626-7297.

   Rochester Tele.  716-777-1234

   Southwestern Bell (Texas)
      Austin      512-870-4064
      Dallas      214-268-1403
      Houston     713-567-4300
      San Antonio 512-351-8050
   Southwestern Bell (Missouri)
      St. Louis   800-SWB-ISDN (800-792-4736)

   US West          303-896-8370 (contact Julia Evans)

   Combinet "BBS":

     By popular demand, the Combinet "BBS" providing information on ISDN
     availability in many areas of the US is now available via the Internet.
     The information is supplied by Bell Communications Research and various
     Operating Companies and is updated periodically as new information
     becomes available.

     To access the service, telnet to bbs.combinet.com and login as
     isdn (no password is required).  After entering an area code and
     three-digit prefix, the service displays the availability of ISDN.
     Also displayed is information about carrier installation prices and
     monthly charges.

     For those without direct Internet access, the service continues to be
     available on a dialup basis using a 2400 bit/sec modem at (408) 733-4312.

   Intel:

     If you want to know if you can get basic rate ISDN in YOUR LOCAL AREA
     (anywhere in the U.S>),  call the helpful folks at Intel on
     1-800-538-3373, and ask for extension 208.  They have lots of good FREE
     info on ISDN availability, pricing, etc.

[email protected] (Ben Harrell)
[email protected] (Eric A. Litman)
[email protected] (Marc Evans)
[email protected] (Al Varney)
[email protected] (Gerhard Bernot)
[email protected] (Jamie Honan)
[email protected] (David L. Markowitz)
Peter Ilieve <[email protected]>
[email protected] (Gerald L. Hopkins)
[email protected] (Gary C. Kessler)
[email protected] (Jim Fenton)
[email protected] (James - The Keeper)
[email protected] (stamp,scott)
[email protected] (Sven De Kerpel)
--
Dave Cherkus ----- UniMaster, Inc. ----- Contract Software Development
Specialties: UNIX TCP/IP X OSF/1 AlphaAXP AIX RS/6000 Performance ISDN
Email: [email protected]  Tel: (603) 888-8308  Fax: (603) 888-8308
if (cpu.type == PENTIUM && cpu.step < 8)   { panic("Intel Inside!"); }


Newsgroups: comp.dcom.isdn,comp.answers,news.answers,alt.internet.services
Path: newsbf01.news.aol.com!newstf01.news.aol.com!uunet!news.sprintlink.net!mv!fastball.unimaster.com!cherkus
From: [email protected] (Dave Cherkus)
Subject: comp.dcom.isdn FAQ Part 4 of 5: Standards and References
Approved: [email protected]
Keywords: ISDN FAQ telecom
Originator: [email protected]
Distribution: world
Message-ID: <[email protected]>
Nntp-Postin

1/25/95 12:06:49 PM Opening �ISDN FAQ 1/25/95#4� for recording.
g-Host: fastball.unimaster.com
Sender: [email protected] (System Administrator)
Supersedes: <[email protected]>
Reply-To: [email protected] (Dave Cherkus)
Expires: Thu, 9 Feb 1995 01:23:47 GMT
Summary: This posting contains a list of Frequently Asked
        Questions (and their answers) about ISDN.
Organization: UniMaster, Inc.
Date: Thu, 12 Jan 1995 01:28:04 GMT
References: <[email protected]>
Followup-To: comp.dcom.isdn
Lines: 362
Xref: newsbf01.news.aol.com comp.dcom.isdn:7728 comp.answers:6083 news.answers:18980 alt.internet.services:25722

Archive-name: isdn-faq/part4
Last-modified: $Date: 1995/01/12 01:18:41 $
Version: $Revision: 4.2 $
------------------------------

4.01) Where can I find what all of these acronyms mean?

An archive of telecommunication related files are maintained on
lcs.mit.edu in the telecom-archives sub directory.  There is a
glossary of general telecom acronyms, as well as an ISDN specific
list.

[email protected] (Joe Smith) asks:
[email protected] (Peter M. Weiss)
------------------------------

4.02) What are the relevant standards?

There are numerous ITU-T (formerly CCITT) standards on ISDN.
References in the book bibliography (especially Stallings and appendix
B of Kessler) contain more details.

Q.921
(aka I.441) "ISDN User-Network Interface Data Link Layer Specifications", 1988
            The D channel protocol. Found in Blue book Fascicle VI.10

Q.931
(aka I.451) "ISDN User-Network Interface Layer 3 Specification for Call control"
           1988. The messages that are sent over the D channel to set up
           calls, disconnect calls etc. Found in Blue book Fascicle VI.11
   Q.930: General Overview
   Q.931: Basic ISDN call control
   Q.932: Generic procedures for the control of ISDN supplementary services
   Q.933: Frame Mode Call Control
   Q.2931 (ex-Q.93B): B-ISDN Call control

G.711: Pulse Code Modulation (PCM) of Voice Frequencies

G.722: 7-kHz Audio Coding Within 64 kbit/s

G.728: Coding of Speech at 16 kbit/s Using Low-Delay Code Excited
      Linear Prediction (LD-CELP)

H.320: Narrow-band Visual Telephone Systems and Terminal Equipment

H.221: Frame Structure for a 64 to 1920 kbit/s Channel in Audiovisual
      Teleservices

H.230: Frame Synchronous Control and Indication Signals for Audiovisual Systems

H.242: System for Establishing Communications Between Audiovisual Terminals
      Using Digital Channels up to 2 Mbit/s

H.261: Video Codec for Audiovisual Services at p x 64 kbits/s

H.243: Basic MCU Procedures for Establishing Communications Between Three or
      More Audiovisual Terminals Using Digital Channels Up to 2 Mbit/s

I.2xy      "ISDN Frame Mode Bearer Services", 1990

I.310      ISDN - Network Functional Principles
I.320      ISDN protocol reference model
I.324      ISDN Network Architecture
I.325      Reference configs for ISDN connection types
I.326
I.330      ISDN numbering and addressing principles
I.331      Numbering plan for ISDN (and several more in I.33x relating
          to numbering and addressing and routing)
I.340      ISDN connection types
I.350/351/352    refer to performance objectives
I.410-412   refer to user-network interfaces
          as do I.420 and 421
I.430/430  Layer 1 specs
I.440/441  Layer 2 specs (Q.921)
I.450-452  Layer 3 specs (Q.931)
   I.450: General Overview
   I.451: Basic ISDN call control
   I.452: Extensions
I.460-465  Multiplexing and rate adaption
I.470      Relationship of terminal functions to ISDN

V.110
(aka I.463) "Support of DTE's with V Series Type Interfaces by an ISDN"
           Terminal rate adaption by bit stuffing.  C.f. V120.

V.120
(aka I465) "Support by an ISDN of Data Terminal Equipment with V series
           Type Interfaces with Provision for Statistical Multiplexing" 1990
           (This has been amended since the blue book). An alternative to
           V.110

V.25bis    calling mechanism under synchronous.


ITU-T (formerly CCITT) standards can be obtained via:

   Gopher: info.itu.ch

   E-Mail: Mail to: [email protected]
           Mail body:
                HELP
                LIST /itu
                LIST /itu/rec

   Hard Copy:

           International Telecommunication Union
           Information Services Department
           Place des Nations
           1211 Geneva 20
           Switzerland

           TEL: +41 22 730 5554
           FAX: +41 22 730 5337
           Internet email: [email protected]
           X.400 email: S=helpdesk;A=arcom;P=itu;C=ch


[email protected]
[email protected]
[email protected] (Oliver Jones)
[email protected] (Gary C. Kessler)
[email protected] (Sven De Kerpel)
------------------------------

4.03) Where can I read more?

"ISDN In Perspective"
Fred R. Goldstein
Addison-Wesley
ISBN 0-201-50016-7

[Ed. Note: the second edition is new...]
"ISDN: Concepts, Facilities, and Services, Second Edition"
Gary Kessler
McGraw-Hill, 1993 (2/e).
ISBN 0-07-034247-4

"Integrated Services Digital Networks: Architectures / Protocols / Standards"
Hermann J. Helgert
Addison Wesley
ISBN 0-201-52501-1

The Basic book of ISDN (second edition)
Motorola University Press
Addison-Wesley Publisching company inc.
ISBN 0-201-56374-6

A 48 pages booklet covering all basic questions on ISDN and some case
studies on the possible installation.  Can be obtained freely from
Motorola sometimes.

"Sensible ISDN Data Applications"
Jeffrey Fritz
[email protected]
West Virginia University Press
ISBN 0-937058-31-9

"The ISDN Literacy Book"
Gerald L. Hopkins
Addison-Wesley 1995
ISBN 0-201-62979-8
384 pages, softcover

"ISDN and Broadband ISDN" (2nd edition)
William Stallings
Macmillan
ISBN 0-02-415475-X

"Networking Standards: A Guide to OSI, ISDN, LAN and MAN Standards"
William Stallings
Addison-Wesley

"A Catalog of National ISDN Solutions for Selected NIUF Applications"
North American ISDN User's Forum
(use NIUF information above or order via Bellcore, document GP-1, $43)
and/or see info on anonymous ftp to info.bellcore.com above)

The 1990 ISDN Directory and Sourcebook
Phillips Publishing Inc.
7811 Montrose Road
Potomac, MD  20854
(301) 340-2100

ISDN Sourcebook
Information Gatekeepers Inc.
214 Harvard Ave,
Boston, MA  02134
(617) 232-3111
1 800 323-1088

Bellcore National ISDN Specifications
SR-NWT-001953
SR-NWT-002361
SR-NWT-002120 (National ISDN-2)
US: 1-800-521-2673, other: 1-908-699-5800

Bellcore ISDN Availability Report
WR-NWT-2102 ($103)
US: 1-800-521-2673, other: 1-908-699-5800

Bellcore ISDN Deployment Data
Special Report (SR) 2102
US: 1-800-521-2673, other: 1-908-699-5800

AT&T Technical Journal special issue on ISDN
(Volume 65, Issue 1) January/February 1986

EFFector. Issue 2.01, Issue 2.06, Issue 2.08
ftp.eff.org:pub/EFF

AT&T Documents
--------------
"5ESS(rg.tm) Switch National ISDN Basic Rate Interface
Specification - 5E8 Software Release"
AT&T document number 235-900-341

"5ESS(rg.tm) Switch ISDN Basic Rate Interface
Specification - 5E7 Software Release" {Custom BRI}
AT&T document number 235-900-331

"5ESS(rg.tm) Switch ISDN Primary Rate Interface
Specification - 5E7 Software Release"
AT&T document number 235-900-332

"5ESS(rg.tm) Switch Interface Specification to a
Packet Switched Public Data (X.75) Network -
5E8 Software Release"  [as in CCITT X.75]
AT&T document number 235-900-317

"5ESS(rg.tm) Switch X.75' Intranetwork Interface
Specification - 5E8 Software Release"
 [as in Bellcore's TR-000310]
AT&T document number 235-900-325

"5ESS(rg.tm) Switch Documentation Description
and Ordering Guide"
 [list/description of 5ESS documents]
AT&T document number 235-001-001

AT&T documents ordering:
1-800-432-6600 USA
1-800-225-1242 Canada
+1 317 352-8557 elsewhere

AT&T Customer Information Center
Order Entry
2855 N. Franklin road
Indianapolis, IN 46219
(317) 352-8484 (fax)

Northern Telecom Documents
--------------------------

NTP 297-2401-100        ISDN System Description
NTP 297-2401-010        ISDN Product Guide
------------------------------

4.04) Can I get on-line National ISDN information from Bellcore?

Information about National ISDN is now available by anonymous FTP (File
Transfer Protocol) over the Internet at host "info.bellcore.com". FTP
allows the retrieval of formatted documents and software.

The rest of this document assumes that you have access to a machine
connected to the Internet that supports FTP, and that you have a system
that can print both ASCII formatted documents and PostScript formatted
documents.

The files are available in PostScript through anonymous FTP from
"info.bellcore.com" in the /pub/ISDN sub directory.

I M P O R T A N T:  Many of the files are large, it is essential
that you first get the README (the upper case is important) file
for detailed information on retrieving various files associated with
documents.

The following text describes a typical anonymous FTP session:

 system: ftp info.bellcore.com <enter>
 Connected to info.bellcore.com.
 220 info FTP server (SunOS 4.1) ready.
 Name: anonymous <enter>
 331 Guest login ok, send ident as password.
 Password: <enter your internet login -- example: [email protected]>
 230 Guest login ok, access restrictions apply.
 ftp> cd /pub/ISDN <enter>
 250 CWD command successful.
 ftp> mget README <enter>
 mget README? yes <enter>
 200 PORT command successful.
 150 ASCII data connection for README (8758 bytes).
 226 ASCII Transfer complete.
 local: README remote: README
 8943 bytes received in 0.19 seconds (46 Kbytes/s)
 ftp> quit <enter>
 221 Goodbye.

<enter> represents pressing the "enter" or "return" key on your
computer keyboard.

The README file is in ASCII format and may be read with most word
processors.  The other files in the directory are in PostScript format
and may be downloaded as needed by using the "mget" command while in
the FTP.

You should determine your local procedure for printing PostScript
documents.  For example, on many UNIX systems, PostScript files may be
printed on a PostScript printer by using the "lpr" command. A typical
Post Script print command may look like:

   lpr -P<printer> -h -v <filename.ps>

where:
   <printer> represents printer name accessable to your system, and
   <filename.ps> represents a PostScript file.

notes:
   '-h' corresponds to the option of suppressing the printing of
   burst page while '-v' corresponds to the option of printing
   raster image, i.e., PostScript. Please note that the printer
   must support PostScript imaging model in order to print these
   files.

Some systems are configured to detect PostScript formatted files
automatically, so a command to print the documents on that kind
of system is:

   lpr -P<printer> <filename.ps>

If you have problems or you'd like to comment on the information
stored at this site or wish to make recommendations for future
enhancements, you can send email to:

       [email protected]

Or, call the Bellcore's National ISDN Hotline: 1-800-992-ISDN

A recent visit to the system revealed the following directories:

CATALOG:        NIUF (National ISDN User's Forum) catalog:
               "A Catalog of National ISDN Solutions for Selected NIUF
               Applications, Second Edition." [Ed: lots of big files,
               but some great info - chapter 4 is hundreds of pages of
               ISDN product/vendor information]
CONTACTS:       List of ISDN contacts at various Regional Bell Operating
               Companies
DEPLOYMENT:     Currently empty but being worked on
EVENTS:         Info about the "ISDN Solutions '94" event
NATIONAL_ISDN:  Bellcore document SR-NWT-2006, "National ISDN"
               [Ed: Requires Apple's Laser Prep; e.g., //pip.shsu.edu/
               tex-archive/dviware/psprint/vms/laserprep70.ps, in many
               cases when a non-Apple printer is being used]
README:         The Read Me File
TARIFF:         Currently empty but being worked on

[email protected] (sohl,william h)
--
Dave Cherkus ----- UniMaster, Inc. ----- Contract Software Development
Specialties: UNIX TCP/IP X OSF/1 AlphaAXP AIX RS/6000 Performance ISDN
Email: [email protected]  Tel: (603) 888-8308  Fax: (603) 888-8308
if (cpu.type == PENTIUM && cpu.step < 8)   { panic("Intel Inside!"); }


Newsgroups: comp.dcom.isdn,comp.answers,news.answers,alt.internet.services
Path: newsbf01.news.aol.com!newstf01.news.aol.com!uunet!news.sprintlink.net!mv!fastball.unimaster.com!cherkus
From: [email protected] (Dave Cherkus)
Subject: comp.dcom.isdn FAQ Part 5 of 5: Products
Approved: [email protected]
Keywords: ISDN FAQ telecom
Originator: [email protected]
Distribution: world
Message-ID: <[email protected]>
Nntp-Posting-Host: fastball.unimaster.com
Sender: [email protected] (System Administrator)
Supersedes: <[email protected]>
Reply-To: [email protected] (Dave Cherkus)
Expires: Thu, 9 Feb 1995 01:23:47 GMT
Summary: This posting contains a list of Frequently Asked
        Questions (and their answers) about ISDN.
Organization: UniMaster, Inc.
Date: Thu, 12 Jan 1995 01:28:17 GMT
References: <[email protected]>
Followup-To: comp.dcom.isdn
Lines: 621
Xref: newsbf01.news.aol.com comp.dcom.isdn:7729 comp.answers:6084 news.answers:18981 alt.internet.services:25723

Archive-name: isdn-faq/part5
Last-modified: $Date: 1995/01/12 01:18:42 $
Version: $Revision: 4.2 $
------------------------------

5.01) Who is shipping what?

 ISDN Products by Vendor:

   +------------------+--------------------------------------------+
   |                  |            Product Type                    |
   |  Vendor          +----+----+----+----+----+----+----+----+----+
   |                  | IF | TA | BR | RO | TE | IC | TS | VC | CC |
   +------------------+----+----+----+----+----+----+----+----+----+
   | AccessWorks      |    |  x |    |    |    |    |    |    |    |
   | Adtran, Inc.     |    |  x |    |    |    |    |    |    |    |
   | AMD              |    |    |    |    |    |  x |    |    |    |
   | ANDO             |    |    |    |    |    |    |  x |    |    |
   | Ascend           |    |    |    |  x |    |    |    |    |    |
   | AT&T             |  x |  x |    |    |  x |  x |  x |    |    |
   | AT&T Microelect. |    |    |    |    |    |  x |    |    |    |
   | BinTec           |  x |    |    |  x |    |    |    |    |    |
   | Cisco Systems    |    |    |    |  x |    |    |    |    |    |
   | Combinet         |    |    |  x |    |    |    |    |    |    |
   | Conware GmbH     |    |    |  x |  x |    |    |    |    |    |
   | CPV-Stollmann    |  x |  x |  x |  x |    |    |    |    |    |
   | CSI              | x  |    | x  | x  |    |    |    |    |    |
   | diehl isdn       |  x |    |  x |  x |    |    |    |    |  x |
   | DigiBoard        |    |    |  x |    |    |    |    |    |    |
   | Digital Eq.      |  x |    |    |  x |    |    |    |    |    |
   | DGM&S            |    |    |    |    |    |    |    |    |  x |
   | EICON Technology |  x |    |    |    |    |    |    |    |    |
   | EuRoNIS          |  x |    |    |    |    |    |    |    |    |
   | Gandalf          |  x |  x |  x |    |    |    |    |    |    |
   | Hayes            |  x |  x |    |    |    |    |    |    |    |
   | Hermstedt        |  x |  x |    |    |    |    |    |    |    |
   | IBM              |  x |    |    |    |    |    |    |    |    |
   | INS              |    |    |    | x  |    |    |    |    |    |
   | Intel            |  x |    |    |    |    |    |    |  x |    |
   | ISDN Systems     |  x |    |    |    |    |    |    |    |    |
   | MERGE            |    |    |    |    |    |    |  x |    |    |
   | MITEL            |    |    |    |    |    |    |  x |    |    |
   | Motorola UDS     |    |  x |    |    |    |    |    |    |    |
   | MS Telematica    |  x |    |    |    |  x |    |    |    |    |
   | netCS            |  x |    |    |  x |    |    |    |    |    |
   | Network Express  |    |    |  x |  x |    |    |    |    |    |
   | Paxdata          |    |  x |  x |    |    |    |    |    |    |
   | SCii             |  x |    |    |    |    |    |    |    |    |
   | Siemens          |    |    |    |    |    |  x |    |    |    |
   | Spider Systems   |    |    |    |  x |    |    |    |    |    |
   | Sun Microsystems |  x |    |    |    |    |    |    |    |    |
   | Telenetworks     |    |    |    |    |    |    |    |    |  x |
   | Teleos           |    |    |    |    |    |    |  x |    |    |
   | Telesoft         |    |    |    |    |    |    |  x |    |  x |
   | Telrad Telecomm. |    |  x |    |    |    |  x |  x |    |    |
   | TPI              |    |    |    |    |    |    |  x |    |    |
   | Trillium         |    |    |    |    |    |    |    |    |  x |
   | Zydacron         |    |    |    |    |    |    |    |  x |    |
   +------------------+----+----+----+----+----+----+----+----+----+

     Key:

       IF: Interface Card
       TA: Terminal Adapter (Standalone)
       BR: Bridge
       RO: Router
       TE: Telephones
       IC: Integrated Circuit
       TS: Test Equipment
       VC: Video Teleconferencing Equipment
       CC: Call Control Software

Vendor Info:

AccessWorks Communications Inc
670 North Beers Street
Holmdel, NJ 07733
Tel: 800 248 8204
Tel: 908 721 1337
Fax: 908 888 4456
Internet: [email protected]

Adtran, Inc.
901 Explorer Blvd
Huntsville, AL 35806-2807 USA
+1 205 971 8000
fax +1 205 971 8030

Advanced Micro Devices
901 Thomson place
Mailstop 126
Sunnyvale, CA 94086
(408) 732 2400 (voice)

ANDO:
7617 Standish Place
Rockville, MD 20855
voice: (301) 294-3365
fax:   (301) 294-3359
email:  [email protected]

Ascend Communications, Inc.
1275 Harbor Bay Pkwy
Alameda, CA 94501
(510) 769-6001
[email protected]

AT&T
1-800-222-PART: Quick access to small quantity orders of ISDN products.
Personal Desktop Video or TeleMedia Connection System:
   Visual Communications Products
   8100 East Maplewood Avenue 1st Floor
   Englewood, CO  80111
   (800)843-3646  (800)VIDEO-GO  Prompt 3

AT&T Microelectronics
Allentown, PA
(800) 372-2447
Distributer: CoSystems at 408.748.2190
 mktg: Steve Martinez at 408.748.2194 ([email protected])
 tech: Gary Martin at 408.748.2195 ([email protected])

BinTec Computersysteme GmbH
Willstaetter Str. 30
D-90449 Nuernberg
Germany
Phone: +49.911.9673-0
Fax:   +49.911.6880725
email: [email protected]

Cisco Systems
San Jose CA
1-800-553-6387
or 1-800-888-8187 ext. 6849 (salesman scott smith)

Combinet
333 West El Camino Real, Suite 240
Sunnyvale, California 94087
(408) 522 9020 (voice)
(408) 732 5479 (fax)
(800) 967-6651 for product lit
(408) 522-9020 for pre-sales support

Conware Computer Consulting GmbH
Killisfeldstr. 64
D-76227 Karlsruhe
Germany
Phone: +49.721.9495-0
Fax:   +49.721.9495-130
email: [email protected]

CPV-Stollmann Vertriebs GmbH
Gasstrasse 18     P.O. Box 50 14 03
D-22761 Hamburg   D-22714 Hamburg
Germany           Germany
Phone: +49-40-890 88-0
Fax: +49-40-890 88-444
Electronic Mail:
       [email protected] (general inquiries)
       [email protected] (IPX router technical contact)
       [email protected] (IP router technical contact)

CSI (Connective Strategies, Inc.)
Clyde Heintzelman, V. P. Marketing
4500 Southgate Pl., Suite 100
Chantilly, VA  22021
Voice: (703) 802-0023
FAX: (703) 802-0026
Internet: [email protected]

diehl isdn GmbH
Bahnhofstrasse 63
D-7250 Leonberg
Germany
Tel. 49/7152/93 29 0
Fax. 49/7152/93 29 99
email: [email protected]

DigiBoard
6400 Flying Cloud Drive
Eden Prarie, MN 55344
(612) 943 9020  (voice)
(612) 643 5398  (fax)
(800)-344-4273
[email protected] (email)

Digital Equipment Co
REO2 G/H2
DEC Park
Worton Grange
Reading
Berkshire
England

DGM&S
609.866.1212

EICON Technology
Montreal, Quebec
   EiconCard ISDN/PC ISA PC card.
   Supports 2B + D  "multiplexed" over single RJ45 connector.
   They provide s/w for Windows, OS/2, SCO UNIX, UNIX SVR4, Netware.
   List price $1395

EuRoNIS
Manufacturer of the Macintosh Planet-ISDN NuBus Card.
166 rue Montmartre
75002 Paris, France
Tel: +33 (1) 44 82 70 00
Fax: + 33(1) 42 33 40 98
[email protected]

Gandalf Technologies
130 Colonnade Road South
Nepean Ontario Canada K2E 7M4
(800) GANDALF (voice)

Hayes ISDN Technologies
501 Second St., Suite 300
San Francisco  CA  94107
(415) 974-5544 (voice)
(415) 543-5810 (fax)

Hermstedt GmbH
Kaefertaler Strasse 164
D-68167 Mannheim
Germany
Phone: +49 (621) 3 38 16-0
Fax:   +49 (621) 3 38 16-12

International Business Machines
(800) 426-2255

INS - Inter Networking Systems
P.O. Box 101312
D-44543 Castrop-Rauxel
Germany
+49 2305 356505 (voice)
+49 2305 24511  (fax)
e-mail: [email protected]

Intel Corporation
Intel Products Group
5200 N.E. Elam Young Parkway
Hillsboro, Oregon, 97124-6497
FaxBack 1-800-525-3019
Product Info:
 +1-800-538-3373, in the US and Canada
 +44-1793-431155, in Europe
 +1-503-264-7354, worldwide
Intel BBS 1-503-264-7999 (modem settings 8-N-1, up to 14.4Kbps)
Tech. support (503) 629-7000

ISDN Systems Corp.
Vienna VA USA
703-883-0933

MERGE Technologies Group, Inc.
211 Gateway Road West, Ste. 201
Napa, CA 94558
800.824.7763 (Voice)
707.252.6687 (FAX)

MITEL Corporation
360 Legget Drive
Kanata, Ontario, Canada
K2K 1X3
Paul Mannone or Peter Merriman
(613) 592-2122

Motorola UDS
5000 Bradford Drive
Huntsville, AL 35805
(205) 430 8000 (voice)

Ms Telematica
via S. Marcellina 8
20125 Milano
Italy
Phone: +39.2.66102315
Fax:   +39.2.66102708
email: [email protected]

netCS Informationstechnik GmbH
Feuerbachstr. 47-49
12163 Berlin 41
Germany
Tele: +49.30/856 999-0
FAX: +49.30/855 52 18
E-Mail: [email protected] / [email protected]

Network Express, Incorporated ([email protected])
World Headquarters       Western Regional Office
4251 Plymouth Road       2694 Bishop Drive, Suite 103
Ann Arbor, MI 48105      San Ramon, CA 94583
tel  (313) 761-5005      tel   (510) 244-2080
fax  (313) 995-1114      fax   (510) 244-2083

Paxdata Networks Limited
Communications House
Frogmore Road
Hemel Hempstead
HERTS HP3 9RW
UK
0442 236336 (voice)
0442 236343 (fax)
mktg: Jim Fitzpatrick ([email protected])
tech: Giles Heron ([email protected])

SCii Datavoice SO ISDN NuBus card
+49 (0) 89-54-67-57-0 (Munich, Germany)

Siemens Components Inc.
Integrated Circuit Division
2191 Laurelwood Road
Santa Clara, CA 95054-1514
(408) 980-4500

Spider Systems
UK                         France                   Germany
Spider Systems Limited     Spider Systems SA        Spider Systems Limited
Spider House               Les Algorithmes          Schadowstrasse 52
Peach Street               Saint Aubin 91194        D-4000 Dusseldorf 1
Wokingham                  Gif-sur-Yvette           Germany
England                    Paris Cedex
RG11 1XH                   France
0734 771055 (voice)        (1) 69 41 11 36 (voice)  (0211) 93 50 120 (voice)
0734 771214 (fax)          (1) 69 41 12 27 (voice)  (0211) 93 50 150 (fax)

Sun Microsystems Computer Company (SMCC)
Mountain View, CA
(800) USA-4SUN

Telenetworks
US                                 Europe
Lauren May / Bob Gefvert           Ian Walsh (DIVA)
625 Second St., Suite 100          Kingswood House, 12 Shute End
Petaluma CA 94952                  Wokingham, RG11 1BJ, England UK
phone 707-778-8737                 phone +44.734.891719
fax   707-778-7476                 fax   +44.734.891721
emal  [email protected]

Teleos
2 Meridian Road
Eatontown, NJ 07724
908.389.5700

Telesoft
Chris Cox
512.282.6701

Telrad Telecommunications, Inc.
135 Crossways Park Drive
Woodbury, New York 11797
(516) 921-8300
1 800 645-1350
       TelradPAC:  0B+D PAD      NI-1 & Euro-ISDN
       IDS:        V&D phone     NI-1
       MTA:        V.110 TA      Euro-ISDN

TP

1/25/95 12:07:24 PM Opening �ISDN FAQ 1/25/95#5� for recording.
I
Tele-Path Industries, Inc.
221 South Yorkshire Street
Salem, VA 24153
+1 703 375 0500

Trillium
310.479.0500

Zydacron, Inc.
670 Commercial Street
Manchester, NH 03101
Tel: (603) 647-1000
Fax: (603) 647-9470

------------------------------

5.02) How about that SPARCstation 10?

The hardware on the SS10 supports 2 B channels (64K+64K) and 1 D
channel (16K) for a grand total 144K in marketing speak.  Typically you
might use both B channels for data, 1 channel for voice and 1 channel
for data, or 1 channel for data to 1 point and 1 channel for data to
another point.  In some parts of the world it's also popular to run
X.25 over the D channel.

Info from the SPARCstation 10 full announcement e-mail:

 - What Becomes Available When:
       o ISDN
           Chip on the motherboard                     (done)
           ISDN Drivers on Solaris 2.1 or greater      (done)
           Teleservices API                            Q1 CY93 Solaris 2.x
           Wide Area Networking software               Q1 CY93 Solaris 2.x
           The chip on the motherboard provides a BRI (basic rate interface)
           ISDN connection that is integrated with workstation audio.
           The drivers provide a low level interface to the hardware.
           The Teleservices API enables application development for
           workstation/telephony integration - providing functions like
           call setup, transfer, hold, confer, etc.  The API is hardware
           independent so that it will work with third party non-ISDN
           telephony hardware and software.  The WAN software enables
           data communication - running IP over ISDN (in other words,
           applications that run over ethernet will run over ISDN).
           In the first release, Sun will support data communications
           in the US (for the AT&T 5ESS switch), the UK, France, Germany
           and Japan.  We will support voice services in the US (for
           the AT&T 5ESS switch) only.

This is also now available on the SPARCstation LX, and available as an
SBus card for any SBus workstation running Solaris 2.1 or later.

The current set of ISDN drivers for Solaris 2.1 or greater support
the AT&T 5ESS switch;  the next release is expected to support
DMS-100 and national standard.

Get API_xtel* from sunsite.unc.edu:/pub/sun-info/white-papers for
more information on the API itself.  The XTel libraries, etc., are
not bundled with either Solaris 2.x or SunLink ISDN at this time.

SunLink ISDN description (quoted from Fall/Winter '93 SunExpress catalog):
The SunLink ISDN software included in both kits is based on the international
CCITT standard, and supports the following carrier-dependent implementations:
o  AT&T 5ESS (U.S.)
o  France Telecom VN2 (France)
o  DBT 1TR6 (Germany)
o  Britsh Telecom ISDN2 (U.K.)
o  NTT INS-Net 64 (Japan)

Sunlink ISDN software provides the following features:
o  Transparent IP connectivity, to allow you to run most existing IP
  applications, without modification, over ISDN
o  Graphics User Interface (GUI)-based configuration tool, for easy
  installation and administration
o  Security features, including callback, calling address, and PPP
  authentication password
o  Inactivity timer, for transparent open/close connections
o  Integrated network management with SunNetManager agent

[email protected] (Dan Kegel)
[email protected] (Tom Kessler)
[email protected]
[email protected] (David L. Markowitz)
------------------------------

5.03) How about that IBM Waverunner?

The IBM WaveRunner Digital Modem is an internal adapter for personal
computers (ISA, Microchannel or PCMCIA) which can communicate over an
ISDN line to either ISDN destinations or analog modems and FAX
machines.  WaveRunner requires ISDN Basic Rate service, an NT-1, and
either OS/2 2.1 or higher or Microsoft Windows 3.1 or higher.

WaveRunner uses AT-style commands, can be used with existing
communication application, supports V.120 encapsulation and performs
TCP/IP SLIP to Synchronous TCP/IP Translation.

The WaveRunner Hot Line at 1-919-254-ISDN is available for questions
Technical Support.  For a product brochure, call 1-800-426-3395 and
request document 13403.  To order, call 1-800-IBM-2YOU (1-800-426-2968)

A complete description is available via anonymous ftp:

   ibminet.awdpa.ibm.com: pub/announcements/193-305

[email protected] (Rob Jordan)
[email protected] (Laurence V. Marks)
------------------------------

5.04) How about that SGI?

Indy ISDN BRI:

 Available as a no charge option to all Indy owners running IRIX 5.2
 or one of its patch variants.  ISDN will be bundled with the releases
 after IRIX 5.2.  In North America, call SGI customer service at
 1-800-800-4744; otherwise, call the local support office.

CONFORMANCE:

 Indy ISDN has been approved for the following switch protocols in the
 following countries:

   - 1TR6 in Germany
   - Euro-ISDN in Germany, Sweden, and Finland
   - NTT in Japan

 Indy ISDN has been working with the following switch protocols in the
 United States:

   - DMS100
   - 5ESS
   - National ISDN1

 Countries other than the United States and Canada may require testing
 or approval before Indy ISDN can be operated in that country.  Please
 check with your local provider or with SGI before using Indy ISDN in a
 country that is not listed above.

CAPABILITIES

 The Indy transfers circuit switched data on the B channels.  A point to
 point (PPP) daemon runs in the background on the Indy and uses ISDN to
 set up a IP link to the destination machine.

 Both B channels can be combined using a round-robin packet sending
 scheme to maximize throughput.  This is sometimes called "inverse
 multiplexing".  It is also similar to "bonding".

 PPP can also be configured to bring up one or both B channels as the
 bandwidth demand increases and bring down the channels when the demand
 decreases.  This is commonly known as "bandwith-on-demand".

 PPP utilizes a variety of compression, thus increasing data throughput
 to beyond 128Kb.

 PPP uses PAP to authenticate connections.

 For more specialized data transfer applications which do not want to
 use PPP, an ASI interface is available.

INTEROPERABILITY

 The Indy is interoperable with the following:
   - Other Indy systems
   - Network Express Interhub
   - Ascend

MORE INFO:

 http://www.sgi.com/tech/indy_isdn.marketting_spec.html
 http://www.sgi.com/products/Indy/Indy_top.html
 http:/www.sgi.com

[email protected] (Michael Wang)
[email protected]
[email protected]
------------------------------

5.05) How about that HP?

The  HP  ISDN Link products for the HP Apollo Workstations (HP 9000
S700) and HP Unix Servers (HP 9000 S800) provides network connections
to public or private ISDN networks.

An HP 9000 connected to the ISDN network can communicate with any HP
or non-HP system which implements the TCP/IP protocol and which
encapsulates IP packets according to X.25 RFC877/1356 or with the PPP
protocol (J2460A/J2455A).  Also,  with J2461A/J2456A ordered, the HP
9000 equipped with an ISDN Link  can act as a non-dedicated IP router
for any system attached to the LAN.

The main features of the product are :
 * B Channel switching communication at 56/64 Kbps up to 384Kbps
   Up to three BRI per system are supported.
 * RFC 1356 compliant for X.25 encapsulation between ISDN and
   TCP/IP and PPP interoperability
 * X.25 packet switching over D channel
 * SNMP based network management

Major HP ISDN BRI Link Benefits:
 * Optimizes communication costs
 * Transparency for the end-user
 * Access to packet switching networks via D channel
 * Network security
 * Centralized management through HP OpenView Node Manager
 * Interoperability

To get some more info e-mail to:
 [email protected] (Pierre Vidalenc)
 Tel (+33) 76 62 14 49
 Fax (+33) 76 62 12 78

[email protected] (Pierre Vidalenc)
------------------------------

5.06) How about that Intel RemoteExpress?

The Intel RemoteExpress product comes in two versions, a client version
and a bridge version.  With the client version, you can access a remote
LAN in a seamless fashion.  When you log in remotely, your network
connections look just the same as the network connections in the office;
there are no new interfaces to learn.  With the bridge version, your LAN
administrator can provide you access to remote clients and to other
bridges.  Bridge to bridge calls can connect two or more remote LANs.

RemoteExpress software supplies several levels of security to protect
unwanted access to the LAN.  Embedded on every RemoteExpress board is a
MAC address.  The software can use this address to determine whether a
system is allowed access to the LAN.

The client supports a single BRI ISDN line.  Both B channels can be used
for a single data connection of 128 kbps.  Automatic channel expansion
is supported.  A standard analog phone can be connected to the
RemoteExpress board so that one can either make or receive standard
voice calls.

The bridge product supports up to 3 BRI ISDN lines (6 B channels),
supporting anywhere from 1 to 6 simultaneous connections.  With all 6
channels allocated to a single data connection, bridges support a
maximum transmission rate of 384 kbps (bridge to bridge connection). The
RemoteExpress bridge is an SNMP agent allowing the bridge to be
controlled remotely.  The bridge also supports Spanning Tree Protocol
(802.1 IEEE).

Clients support TCP/IP, Novell NetWares IPX/ODI, NDIS 2.0 (e.g., Banyan
Vines), and several other network operating systems.  Bridges are
transparent and will pass any Ethernet packet.

The hardware and software included in the RemoteExpress LAN adapter
(client product) and RemoteExpress Bridge Pack are made to run in a DOS-
based PC.  The bridge pack includes the RemoteExpress board and an
EtherExpress(tm) LAN adapter (Intel's ethernet board).  Also included
with the bridge is a copy of Intel LANDesk(tm) Traffic Analyst.

[email protected] (Marjorie Panditji)
--
Dave Cherkus ----- UniMaster, Inc. ----- Contract Software Development
Specialties: UNIX TCP/IP X OSF/1 AlphaAXP AIX RS/6000 Performance ISDN
Email: [email protected]  Tel: (603) 888-8308  Fax: (603) 888-8308
if (cpu.type == PENTIUM && cpu.step < 8)   { panic("Intel Inside!"); }


1/25/95 12:08:26 PM Closing Log file.

You are viewing proxied material from gopher.altexxanet.org. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.